Effect of hydrostatic pressure on the lattice parameters of Fe2SiO4 olivine up to 70 kbar

The pressure dependence of the three lattice parameters and unit cell volume of fayalite (Fe₂SiO₄ olivine) was determined by X-ray diffraction under hydrostatic pressures up to 70 kbar. In order to eliminate stress inhomogeneity within a composite material consisting of a specimen mixed with an internal-pressure standard, a liquid (1 : 1 mixture of ethanol and methanol) was used as a pressure-transmitting medium. The isothermal bulk modulus calculated on the basis of the second-order Birch-Murnaghan equation of state gives the values K₀ = 1.19 ± 0.10 Mbar and K₀′ = 7 ± 4, and if we assume K₀′ = 5: K₀ = 1.24 ± 0.02 Mbar. Three axes of fayalite were found to be compressible in the following order, b >c >a. Comparisons with the results obtained under non-hydrostatic compression are made.     

Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.     

Application of Convergence Confinement Analysis to the study of preceding displacement of a squeezing rock tunnel

Summary This paper deals with a study on the geomechanical behavior of the rock mass around the tunnel. The Convergence Confinement Analysis is one of the most appropriate way to estimate this behavior. Elasto-plastic models proposed by Hoek and Brown, Egger and Kastner were adopted in this study.Measurements of the preceding displacement were performed in a road tunnel in Japan, the geology of which is Neogene squeezing mudstone. The measured data was compared with the results of Convergence Confinement Analysis.The preceding displacement was about 40% against the upper bench face converged displacement and 17% against the final converged displacement. Meanwhile, it increased drastically in lower bench excavation step.Back analysis was also executed to calculate the extension of the plastic zone of the rock mass, which was half of that estimated by Convergence Confinement Analysis in upper bench excavation step. But, in lower bench excavation step, the results of the two analyses were very similar. The support pressure and support stiffness were also calculated.     

Geology and geochronology of the Betara region in south-southeastern Brazil: Evidence for possible Statherian (1.80–1.75 Ga) and Calymmian (1.50–1.45 Ga) extension events

The results of geological mapping, chemical analysis and radiometric dating of metabasic rocks of Betara Formation, and mapping and dating of those present in the Betara basement nucleus together with mylonitic granodiorite and syenogranite are reported here. U–Pb analysis of bulk zircon fractions from the metabasic rocks of the basement nucleus yielded a Statherian age of 1790 ± 22 Ma, while the metabasic rocks from the upper part of the Betara Formation yielded a Calymmian age between 1500 and 1450 Ma. This age is a minimum for the deposition of the Betara Formation. The older metabasic rocks are associated with post-tectonic, possibly anorogenic syenogranite, while the younger ones are gabbro or very porphyritic ankaramite whose REE patterns are consistent with crystallization from an N-MORB parent magma. The observations and data point to the probable events associated with extensional processes of the end of Paleoproterozoic and early Mesoproterozoic. Similar registers of Statherian (1.80–1.75 Ga) and Calymmian (1.50–1.45 Ga) extensional events are recorded in other parts of the South American and African continents. The Neoproterozoic witnessed the formation and junction of the tectonic slices which formed the Apiaí domain during the assemblage of western Gondwana.     

Sedimentary Crust and Metallogeny of Granitoid Affinity: Implications from the Geotectonic Histories of the Circum‐Japan Sea Region,Central Andes and Southeastern Australia

Metallogeny of granitoid affinity was reviewed from the aspect of geotectonic history of the continental crust, particularly of the genesis of sedimentary crust involved in magmatism. The redox state of granitoids and related mineralization shows a remarkable contrast between the east and west sides of the Pacific Rim, but if examined closely, the reduced‐type and oxidized‐type granitoid provinces are juxtaposed in three regions: the circum‐Japan Sea region, the central Andes, and the Lachlan Fold Belt in southeastern Australia. Comparative study of these regions revealed that the reduced‐type magmatism associated with Sn mineralization generated in thick sedimentary crust which formed in three geotectonic environments: (i) accretionary terrane along a subduction zone (e.g. Jurassic East Asia), (ii) continental rift (e.g. Early Paleozoic Andes), and (iii) mega‐fan (e.g. Early Paleozoic southeastern Australia). A collisional orogen can provide large amounts of clastic sediment to these environments. The age gap between the magmatism and sedimentation varies depending on the tectonic evolution of individual regions. Thin sedimentary crust may not play an essential role for the reduced‐type magmatism. The oxidized‐type magmatism associated with porphyry Cu and other mineralization generated in the crust which was initially carbon‐free igneous crust or modified from sedimentary crust by magmatism. Subduction‐related basaltic magmas are relatively oxidized, and may enhance fO₂ conditions of granitoid activity. Repeated magmatism in a monotonous convergent margin may be favorable for porphyry Cu mineralization as exemplified in the eastern Pacific Rim.     

Preliminary results of a study on the responses of sedimentary rocks to shaft excavation

A shaft with a diameter of 6 m and a depth of 150 m was excavated in sedimentary rocks. Anin situ study was carried out to identify the size and rock properties of the zone disturbed by the excavation and to estimate the applicability of existing methods for measuring and modelling such a zone. The study detected displacements and changes in the properties of the rock within about 1 m of the shaft wall. Numerical analysis using a model of continuous rock mass can simulate some features of disturbance due to excavation, although slight discrepancies exist between the measured and analysed results. The excavation disturbance detected in this study is probably due to fracturing, the redistribution of stress and undersaturation. However, the relationships between the disturbance due to excavation and these processes have not been quantified. The existing methods for measurements and numerical analysis can provide important information on the disturbance due to excavation but need to be improved to understand disturbance due to excavation further.     

Internal deformation of Sikhote Alin volcanic belt, far eastern Russia: Paleocene paleomagnetic results

We present paleomagnetic results of Paleocene welded tuffs of the 53–50 Ma Bogopol Group from the northern region (46°N, 137°E) of the Sikhote Alin volcanic belt. Characteristic paleomagnetic directions with high unblocking temperature components above 560 °C were isolated from all the sites. A tilt-corrected mean paleomagnetic direction from the northern region is D=345.8°, I=49.9°, α₉₅=14.6° (N=9). The reliability of the magnetization is ascertained through the presence of normal and reversed polarities. The mean paleomagnetic direction from the northern region of the Sikhote Alin volcanic belt reflects a counterclockwise rotation of 29° from the Paleocene mean paleomagnetic direction expected from its southern region. The counterclockwise rotation of 25° is suggested from the paleomagnetic data of the Kisin Group that underlies the Bogopol Group. These results establish that internal tectonic deformation occurred within the Sikhote Alin volcanic belt over the past 50 Ma. The northern region from 44.6° to 46.0°N in the Sikhote Alin volcanic belt was subjected to counterclockwise rotational motion through 29±17° with respect to the southern region. The tectonic rotation of the northern region is ascribable to relative motion between the Zhuravlevka terrane and the Olginsk–Taukhinsk terranes that compose the basements of the Sikhote Alin volcanic belt.     

GPS-measured land subsidence in Ojiya City, Niigata Prefecture, Japan

Land subsidence caused by compression of clay layers in Ojiya City, Japan was measured by global positioning system (GPS) between 1 April 1996 and 31 December 1998.

Three baselines were selected in and around the city, and height difference on a WGS-84 ellipsoid was measured by GPS on each baseline. The ground at the GPS station in the city subsides and rebounds 7 cm every winter and spring, respectively. Measurement accuracy was 9.5 mm standard deviation. Ground water level was observed at a well near the GPS station. Regression analysis between total strain, calculated as ratio of the height difference displacement to the total thickness of the clay layers, and the layers' effective stress change with ground water level change gave good correlation. The slope of regression line 7.0×10⁻¹¹ m²/N was obtained as an average apparent coefficient of volume compressibility of the layers.     

A computational procedure for joining separate map sheets

Map sheets have been often used as a basic spatial unit for managing spatial data produced from paper maps. This often results in incompatibility between adjacent map sheets, because spatial objects do not cross the boundaries smoothly and even the boundaries themselves do not match their neighbors exactly. To solve the problem this paper proposes a computational procedure for joining separate map sheets to obtain seamless spatial data. Line objects digitized separately in different map sheets are considered, which are frequently used to represent road networks, gas pipelines, and boundaries of polygon objects. The procedure consists of three steps: (1) extraction of end nodes, (2) detection of matching nodes, and (3) transformation of the map sheet. Each step goes interactively so that unexpected errors can be avoided by human observation. To test the validity of the procedure, map sheets are combined containing the road network data of Tokyo 23-ku area, Japan. This revised version was published online in July 2006 with corrections to the Cover Date.