Groundwater-level Changes Due to Pressure Gradient Induced by Nearby Earthquakes off Izu Peninsula, 1997

Anomalous water level changes were observed at two wells associated with seismic swarm activity off Izu Peninsula on March, 1997. These are coseismic water level drops followed by gradual postseismic water level rise at the time of large earthquakes during the swarm activity. The post-seismic water level rises, which can be fitted by an exponential function with a time constant of about six hours, are explained in terms of the horizontal pressure diffusion due to the pressure gradient in the aquifer induced by the coseismic static strain.     

Diffuse Emission of CO2 from Showa-Shinzan, Hokkaido, Japan: A Sign of Volcanic Dome Degassing

Two soil CO₂ efflux surveys were carried out in September 1999 and June 2002 to study the spatial distribution of diffuse CO₂ degassing and estimate the total CO₂ output from Showa-Shinzan volcanic dome, Japan. Seventy-six and 81 measurements of CO₂ efflux were performed in 1999 and 2002, respectively, covering most of Showa-Shinzan volcano. Soil CO₂ efflux data showed a wide range of values up to 552 g m^-2 d^-1. Carbon isotope signatures of the soil CO₂ ranged from -0.9‰ to -30.9‰, suggesting a mixing between different carbon reservoirs. Most of the study area showed CO₂ efflux background values during the 1999 and 2002 surveys (B = 8.2 and 4.4 g m^-2 d^-1, respectively). The spatial distribution of CO₂ efflux anomalies for both surveys showed a good correlation with the soil temperature, indicating a similar origin for the extensive soil degassing generated by condensation processes and fluids discharged by the fumarolic system of Showa-Shinzan. The total diffuse CO₂ output of Showa-Shinzan was estimated to be about 14.0–15.6 t d^-1 of CO₂ for an area of 0.53 km².     

K–Ar ages of the basaltic rocks from Far East Russia: Constraints on the tectono-magmatism associated with the Japan Sea opening

K–Ar ages of the Cenozoic basaltic rocks from the Far East region of Russia (comprising Sikhote-Alin and Sakhalin) are determined to obtain constraints on the tectono-magmatic evolution of the Eurasian margin by comparison with the Japanese Islands, Northeast China, and the formation of the back-arc basin. In the early Tertiary stage (54–26 Ma), the northwestward subduction of the Pacific Plate produced the active continental margin volcanism of Sikhote-Alin and Sakhalin, whereas the rift-type volcanism of Northeast China, inland part of the continent began to develop under a northeast–southwest-trending deep fault system. In the early Neogene (24–17 Ma), a large number of subduction-related volcanic rocks were erupted in connection with the Japan Sea opening. After an inactive interval of the volcanism ∼ 20–13 Ma ago, the late Neogene (12–5 Ma) volcanism of Sikhote-Alin and Sakhalin became distinct from those of the preceding stages and indicated within-plate geochemical features similar to those of Northeast China, in contrast to the Japan Arc which produces island arc volcanism. During the Japan Sea opening, the northeastern Eurasian margin detached and became a continental island arc system, and an integral part of continental eastern Asia comprising Sikhote-Alin, Sakhalin and Northeast China, and the Japan Arc with a back-arc basin. The convergence between the Eurasian Plate, the Pacific Plate and the Indian Plate may have contributed to the Cenozoic tectono-magmatism of the northeastern Eurasian continent.     

Effect of hydrostatic pressure on the lattice parameters of Fe2SiO4 olivine up to 70 kbar

The pressure dependence of the three lattice parameters and unit cell volume of fayalite (Fe₂SiO₄ olivine) was determined by X-ray diffraction under hydrostatic pressures up to 70 kbar. In order to eliminate stress inhomogeneity within a composite material consisting of a specimen mixed with an internal-pressure standard, a liquid (1 : 1 mixture of ethanol and methanol) was used as a pressure-transmitting medium. The isothermal bulk modulus calculated on the basis of the second-order Birch-Murnaghan equation of state gives the values K₀ = 1.19 ± 0.10 Mbar and K₀′ = 7 ± 4, and if we assume K₀′ = 5: K₀ = 1.24 ± 0.02 Mbar. Three axes of fayalite were found to be compressible in the following order, b >c >a. Comparisons with the results obtained under non-hydrostatic compression are made.     

Fast Oxidation Reaction of Nitrite by Dissolved Oxygen in the Freezing Process in the Tropospheric Aqueous Phase

Nitrite oxidation in the tropospheric aqueous phase by freezing was evaluated by freezing a field sample. Nitrite oxidation by dissolved oxygen in the freezing process is much faster than by other oxidation processes, such as reactions with ozone, hydrogen peroxide or dissolved oxygen in an aqueous solution at pHs 3 to –6. At pH 4.5 and 25°C, the lifetime of nitrite in the aqueous phase is ca. 1 hr in oxidation by ozone (6×10^-10 mol dm^-3), ca. 10 hr in oxidation by H₂O₂ (2×10^-4 mol dm^-3), and 7.5 hr (Fischer and Warneck, 1996) in photodissociation at midday in summer. Under the same conditions at a temperature below 0°C, the lifetime of nitrite in the freezing process is estimated as ca. 2 sec when the droplets are frozen within a second. The reaction by freezing is affected by the presence of salts, such as NaCl or KCl, or orgnaic compounds, such as methanol or acetone. The results of freezing a field rain or fog sample showed that nitrite oxidation proceeds below pH 6, and the conversion ratio of nitrate from nitrite increases with decreasing pH. The oxidation of nitrite by freezing was also observed in freezing fog particles generated by an ultrasonic humidifier. The ratios of the concentrations of ions in the winter sample to those in the summer sample (or those in the fog sample) were almost the same values. However, the concentration of nitrite in the winter sample was lower than that estimated by the ratios of other ions. From the present study, it seems that the freezing process plays an important role in the nitrite sink process in the tropospheric aqueous phase.     

Frequency-dependent Attenuation of High-frequency P and S Waves in the Upper Crust in Western Nagano, Japan

—Borehole seismograms from local earthquakes in the aftershock region of the 1984 western Nagano Prefecture, Japan earthquake were analyzed to measure the frequency-dependent characteristics of P- and S-wave attenuation in the upper crust. The records from a three-component velocity seismometer at the depth of 145m exhibit high S/N-ratio in a wide frequency range up to 100 Hz. Extended coda normalization methods were applied to bandpass-filtered seismograms of frequencies from 25 to 102 Hz. For the attenuation of high-frequency P and S waves, our measurements show Q _P ^-1? 0.052?^-0.66 and Q _S ^-1? 0.0034?^-0.12 respectively. The frequency dependence of the quality factor of S waves is very weak as compared with that of P waves. The ratio of Q _P ^-1/Q _S ^-1 is larger than unity in the entire analyzed frequency range.     

A new technique for measuring diffusion coefficients of cations and anions in ionic crystals

A new technique has been developed for measuring the diffusion coefficient in ionic crystals. Based on Einstein's formula expressing the relation between diffusion coefficient and electric mobility, the electrical impedance of a diatomic ionic crystal is derived theoretically as a function of frequency of the applied electric field. In this method, the diffusion coefficients of both cations and anions are determined simultaneously by fitting the measured impedance to the theoretical relation. This method was applied to NaCl single crystals in the temperature range 370–780°C. The impedance was determined over the frequency range 0.01 Hz to 1 kHz, at constant temperature. The diffusion coefficients thus obtained for NaCl agree reasonably well with previous data by means of a radioactive isotope technique. The activation energies for Na⁺ and Cl^? obtained are 1.97±0.03 eV and 2.08±0.06 eV, respectively, in the intrinsic region, and 0.92±0.02 eV and 1.06±0.02 eV in the extrinsic region. It was discovered that there are diffusion blocks of approximately 2 μm width, which obstruct free migration of ions in a single crystal.     

Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.