Trace metal composition of colloidal organic material in marine environments

Marine colloidal material (1 kDa–0.2 μm) was isolated by cross-flow ultrafiltration followed by diafiltration and freeze-drying from surface waters of the Gulf of Mexico and the Middle Atlantic Bight (MAB), as well as from estuarine waters of Galveston Bay. Elemental characterization of isolated colloidal material included organic carbon (OC) and selected trace metal (Cu, Pb, Zn, Cd, Co, Ni, Cr, Be, Fe, Al, Mn, V, Ba, and Ti) determinations. It was found that levels of these metals in marine colloids ranged from <0.1 to 50 μg/g colloidal matter, except for Fe which generally had a concentration >120 μg/g. Most metals (Cu, Pb, Zn, Ni, Al, Mn, V, and Ti) had an average concentration >1 μg/g while concentrations of Cd, Co and Be were usually <1 μg/g. Metal concentrations (μg/g) in isolated colloids were, in general, higher in Galveston Bay than in the Gulf of Mexico, suggesting either high abundance of trace metals in estuarine waters or differences in organic matter composition. Higher colloidal metal concentrations in the MAB than in the Gulf of Mexico might be due to higher terrestrial inputs in the MAB. Colloidal metal concentrations (μg/g) were generally lower than those in average soils, continental crust and suspended particles. However, metal/aluminum ratios (Me/Al) in isolated marine colloids were significantly higher than those for average soils and continental crust. Most importantly, colloids had a metal composition and metal/OC ratio (Me/C) similar to humic substances and marine plankton, suggesting that marine colloids largely originate from planktonic sources and are composed of predominately organic components. The Me/C ratios of Galveston Bay colloids followed the sequence of Cu>Ni, Cr, Zn>Mn>Co>Pb, Cd, which is similar to the Irving–Williams order except for Mn, suggesting that the interaction of metals with marine colloids is determined by the affinity of metals for specific organic ligands.     

Chlorinated hydrocarbons and hatching success in Baltic herring spring spawners

Eggs from 69 females of spring spawning herring from the German Baltic coast (Travemünde, April 1979) were incubated in clean sea water (20‰ S, temperature 8°C) under standard conditions. Sixty-one trials could be used for the evaluation of hatching success. Viable hatch was taken as a measure to evaluate the effects of chlorinated hydrocarbons accumulated in gonads, liver and muscle of parental fish.PCB levels in running ripe females ranged on a wet weight basis between 19 and 241 ng g^?1 (gonad), 20 and 377 ng g^?1 (liver) and 11 and 1820 ng g^?1 (muscle). Concentrations of other chlorinated hydrocarbons (DDD, DDE, γ-HCH, etc.) were in the same range as reported by other authors for Baltic herring (Huschenbeth, 1973, 1977). Viable hatch was significantly affected at ovary DDE concentrations higher than 18 ng g^?1 (wet wt) and PCB concentrations of more than 120 ng g^?1 (wet wt).Results are compared with data obtained during earlier investigations with flounder eggs.     

Fluid forces on a small cylinder in the presence of a large cylinder in relative oscillatory flow

The present brief paper is intended to show that the fluid forces on a small cylinder can be considerably magnified when it is in the flow field of a larger cylinder. Two cylinders of unequal diameter are oscillated in a tank of fluid, and the lift and in-line forces on the smaller cylinder are measured when the pair of cylinders is placed at various orientations and spacings.     

In-line response of a cylinder in oscillatory flow

The most widely used mathematical model to represent flow-induced in-line forces on structures is based on the Morison¹ equation. The present paper investigates the validity of using an extension of Morison's equation for non-stationary structures, by comparing predictions with results from a simple laboratory experiment. An elastically-mounted circular cylinder is placed in the sinusoidal flow of a U-tube, and responds in-line with the flow. Cylinder forces and responses are recorded over a range of Keulegan Carpenter numbers up to 35. An equation of motion is solved simply by using relative coordinates and by employing equivalent linearisation. The linear results are compared over a wide variation of parameters with solutions using the full nonlinear equation. Thereafter experimental results are compared with linear predictions.     

Production of the Crab Elamenopsis kempiHymenosomatidae in the Garmat-Ali Region, Basrah, Iraq

Abstract. The production of the hymenosomatid crab Elamenopsis kempi was calculated for a period of 18 months from a subtidal area of the Garmat-Ali river, southern Iraq. The highest average individual somatic energy was attained in spring. Maximum population biomass and production were attained by the summer cohort and the minimum values were exhibited by the overwintering cohort. The fluctuations of the average population biomass were followed throughout the sampling period. Average total annual population production was 13.2 g DW · m^-2· a^-1 and the P/B ratio was 5.9. These values were compared with those of the most common crustaceans in the region.     

Laboratory study of deep-water breaking waves

In an attempt to elucidate the mechanics of deep-water wave breaking, a variety of breaking waves, including spilling and plunging waves, of different length scales and geometries was studied. The waves were generated through wave-wave interactions using wave packets with constant-steepness components, constant-amplitude components, and also components following the Pierson-Moskowitz distribution. Wave steepening prior to breaking were found to cause an increase in the high frequency spectral slope of the wave spectrum. The slopes were correlated to the type of breaking and the intensity of the breaking. The energy loss through breaking varied with the spectral characteristics of the wave packet. On the other hand, it was also noted that, irrespective of the wave packet, the losses were from the higher frequency end of the first harmonics.     

Molluscan lysosomal responses as a diagnostic tool for the detection of a pollution gradient in Tolo Harbour, Hong Kong

Sub-cellular perturbations in the lysosomal compartment of molluscan haemocytes were examined in mussels (Perna viridis), collected along a pollution gradient. The neutral red technique was validated using a well defined contamination gradient among indigenous populations from five stations along Tolo Harbour, Hong Kong. Condition indices (shell length:dry tissue wt) and tissue metal concentrations were also measured in an attempt to identify a relationship between contamination level and adverse physiological effects. Correlations were found between lysosomal retention time and condition along the pollution gradient. There were significant differences between mussels collected from stations on offshore islands and those collected from inner harbour sites (p < 0.05). There was, however, little correlation between metal concentrations and retention time or condition (p > 0.05).     

Relations between free copper and salinity, dissolved and particulate organic carbon in the Oosterschelde and Westerschelde, Netherlands

In a previous investigation, relatively simple relations were found to estimate free Cu, and hence a good approximation of bio-available Cu, at two sites in estuarine waters of the Dutch Oosterschelde and Westerschelde. In the present study, these relations are validated for the remainder of the two sea arms. In the Westerschelde the relation between the concentration of a dissolved organic ligand (K=10¹³), DOC (dissolved organic carbon) and salinity is valid in a range of salinities at least from 10 up to 25 to 30. This ligand group is primarily riverine and partly estuarine. It is, as far as we know, the strongest ligand for Cu, and its concentration dominantly affects the free Cu ion concentrations, which are around 50 fM. At high salinities, dilution and mineralisation diminish the riverine member of the ligand group too much and the relation with salinity and DOC is no longer valid. In the Oosterschelde the relations between POC (particulate organic carbon) and particulate Cu and between POC and the ratio of particulate and dissolved Cu are valid for the western, central and eastern compartments. Since equilibrium was assumed to exist between dissolved and particulate Cu, free Cu can be calculated from POC and particulate Cu concentrations. Due to the large adsorption capacity of POC, the Oosterschelde is with respect to Cu a very well-buffered system with [Cu²⁺] of 20 fM.     

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentr     

The influence of salinity on the solubility of Zn and Cd sulphides in the Scheldt estuary

In the estuary of the river Scheldt, where an oxygen gradient exists in addition to the salinity gradient, redox processes will be of major importance for trace metal mobilisation. In this study, the influence of salinity and pH on the redox processes of dissolved Zn and Cd sulphides is investigated together with the effects on the ratio of the dissolved Zn and Cd concentrations. The speciation of these metals is calculated with the chemical equilibrium programme +. Zn sulphides are oxidised at lower oxygen concentrations than Cd sulphides, due to lower stability constants, causing a sudden increase or peak in the dissolved Zn/Cd ratio. The formation of dissolved Cd chloride complexes when oxidation occurs at high salinities (S=15) increases the mobility of Cd, causing a decrease in the Zn/Cd peak of the total dissolved concentrations. The peak is three to four times smaller at S=15 than when oxidation occurs at S=2. The simple model calculations compare very well with field data. The Scheldt estuary is suitable to illustrate these calculations. In the 1970s, the anoxic part of the estuary reached S=15–20, but since the early 1980s it has dropped to S=2–10. Historic data on metals in the estuary from 1978, 1987 and the 1990s were used to compare with the equilibrium calculations. The increase of the dissolved Zn/Cd peak at low salinity as a consequence, of the decreasing anoxic region is confirmed well by the data. The good agreement between model calculations and field data is a proof of the extreme importance of redox processes for the solubility of Zn and Cd sulphides in the estuary.