Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

江西省安福地区地热水化学特征研究

为研究江西安福地区水文地球化学特征及控制因素, 本文采集了15组样品, 采用水化学、同位素分析等方法进行研究。结果表明: 研究区地热水以Na-HCO3型水为主, 地下水以HCO3-Na·Ca型为主, 地表水由西南向东北从HCO3-Na·Ca向HCO3-Ca型水演化。水化学组分演化过程主要受岩石风化作用控制, 地层封闭性较差, 水中的Na+、HCO– 3、Sr2+来源于硅酸岩风化溶解。由稳定同位素特征可知, 研究区地热水补给来源为大气降水。研究区热储温度为49.8~101.4 ℃, 地热水循环深度为1 502.6~1 513.6 m。热水在沿断裂带上升过程中与浅层冷水发生混合, 其混合比例为76.1%~87.5%。研究成果为安福地区水循环演化提供依据, 有利于地热资源的合理开采与保护。     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

重庆市云阳县开发荒山资源,发展经济林木

根据县内荒山资源特点,通过因地制宜,树立生态经济学观点,把开发荒山资源与保护生态环境密切结合,加以发展经济林木,促进了当地经济发展。     

植被覆盖地表主动微波遥感反演土壤水分算法研究

主动微波遥感监测土壤水分具有全天时、全天候并对地物有一定的穿透能力等特点,突破了传统测量方法和光学遥感获取土壤水分的局限。文中在分析植被对微波信号影响的基础上,总结了当前国内外基于主动微波遥感监测植被覆盖地表土壤水分的原理和方法,指出利用,宋朝景“水-云模型”从总的极化雷达后向散射中去除植被影响后,能够改进后向散射系数和土壤含水量之间的关系。最后利用ENVISAT ASAR数据,结合实地采样获得的土壤含水量数据拟合两者之间的关系,结果表明农作物覆盖地表土壤水分变化的估算算法还需要进一步发展和改进以提高反演精度。     

江苏夏季气温异常的时空变化特征

利用中国160气象观测站1951-2005 年和江苏省59气象观测站1961-2004年的月平均气温资料, 在分析江苏气温变化的季节-年际变化特征的基础上, 重点分析了江苏夏季气温的年际、年代际变化的时间和空间特征.发现:江苏夏季气温1970s到1990s前期基本上处在一个偏凉期,1960s及1990s中后期以后基本上处在一个偏热期;江苏夏季气温异常存在显著的准6 a、准9 a的年际周期和以16 a为中心的年代际周期;江苏夏季气温趋势自西北向东南呈现正负正的位相分布特点,即江苏西北部和东南部地区夏季气温呈现升高的趋势,其它地区呈现降低的趋势.     

MM5模式对2008年1月25—30日我国南方强冰雪过程的数值模拟

利用NECP 1°×1°6 h再分析资料,分析2008年1月25-30日我国南方一次强降雪天气的大尺度环流形势.结果表明,高空环流波动为此次强降雪提供了有利的高空环流形势,中低层阻塞高压及其南部低涡的长期维持是导致低层锋区形成和强降雪发生的关键;由于部分地区大气垂直结构呈上下冷、中间暖的状态,致使冻雨形成.同时,利用中尺度模式MM5对此次过程进行72 h数值模拟,并以模拟结果对湖南湘潭的冰冻成因进行再分析,进一步证实了低层低温、逆温层的存在及充足的水汽是冰冻形成的主要原因.     

OC4漂浮式风电平台的水弹性响应及波浪载荷研究

漂浮式风电平台在波浪中的摇晃运动会导致塔架根部产生很大的弯矩,极大地威胁平台结构安全。同时流体的附连水质量效应对平台塔架结构的动响应有着较为显著的影响,因此充分考虑这种流固耦合效应有利于更加准确地评估平台塔架的结构动响应。采用三维频域线性水弹性方法计算塔架在流体作用下的结构共振频率特征以及各阶模态振动的主坐标响应特性,然后通过弹性模态叠加法获得塔架的弯矩载荷。并结合概率学手段,预报了短期极限海况下塔架弯曲载荷响应,为新一代漂浮式风电平台结构安全性评估和方案设计提供了技术支撑。