Integrated approach for demarcating the fracture zone for well site location : A case study near Gumla and Lohardaga,Bihar

In recent years satellite remote sensing techniques have greatly aided identification of fractures/joints/faults in connection with groundwater exploration. However, due to some constraints in filtering out the type of fracture i.e. shear fracture, tensional fracture, mineralised fracture etc. as to their “open or closed” nature from groundwater aspects, there is need of adding geophysical survey, particularly resistivity survey to further enhance the accuracy, and hence minimise drilling failures. The area under study is a part of Ranchi plateau and lithologically comprising of granite-gneiss. The present paper lays stress on an integrated approach for localising well sites through satellite data analysis and resistivity profiling along with vertical electrical sounding which is based on fracture patterns. With this combined effort i.e. firstly considering the surfacial features like drainage, geomorpho-logy, lithology and lineaments, and secondly taking into account geophysical survey aspects, i.e. depth and thickness of fracture zone, lateral extent, different layer parameter, etc., fairly accurate results are achieved. In the presnt study this type of an integrated survey has been carried out in Lohardaga and Gumla districts in Bihar, the results of which are highlighted in the paper.     

Land damage assessment - a case study

The paper discusses the land damage assessment and change detection analysis with reference to a mineral bearing zone in Manjhi, Manuni and Churan valleys. The area is located in environmentally sensitive and fragile region of Himalaya and constitutes of nearly 400 small-scale mines of slate, which were operative since last one hundred years and are stopped by court of law since 1995 on account of environment deterioration. The status of land degradation has been studied using IRS-1B satellite data of 1988,1992 and 1995. The geo-coded data on 1:50,000 scale has been interpreted and an increase in land degradation status was noticed. Finally, the management strategy for arresting the further land damage in a broader perspective is suggested.     

In-flight performance analysis of the CHAMP BlackJack GPS Receiver

JPL's BlackJack receiver currently represents the most widely used geodetic grade GPS receiver for space applications. Using data from the CHAMP science mission, the in-flight performance of the BlackJack receiver has been assessed and the impact of various software updates performed during the 2.5 years since launch is described. Key aspects of the study comprise the channel allocation, anomalous data points, and the noise level of the code and carrier data. In addition, it has been demonstrated that the code measurements collected onboard the CHAMP satellite are notably affected by multipath errors in the aft-looking hemisphere, which can be attributed to cross-talk between the occultation antenna string and the primary precise orbit determination antenna. For carrier smoothed 10 s normal points, the code noise itself varies between a minimum of 5 cm at high elevations and 0.5 m (C/A) to 1.0 m (P₁, P₂) at 10° elevation. Carrier-phase data exhibit representative errors of 0.2 to 2.5 mm. The results of the CHAMP GPS data analysis contribute to a better understanding and possible improvement of the BlackJack receiver and support the design of optimal data editing and weighting strategies in precise orbit determination applications.     

Land Cover Mapping for Namdapha National Park (Arunachal Pradesh), India Using Harmonized Land Cover Legends

Since last few decades RS-GIS is playing vital role in studying and mapping spatiotemporal responses of land cover, however, as a matter of fact, the mapping outputs largely depend on the expert's/user's preferences because location specific and people specific land cover classification systems are adopted autonomously for image classification in GIS. This may actually lead to an ambiguous definition of a particular land cover type when such different maps are compared at global level. In 1993, FAO and UNEP started efforts for development of a software tool know as LCCS which is a comprehensive standardized tool capable of providing land cover characterization to all possible land cover types in the world regardless of spatial relevance, mapping scale, data collection method etc. Adding to the global efforts of land cover legend harmonization and mapping, this study presents development of harmonized land cover legends for Namdapha National Park located in north-eastern Indian Himalayan region using LCCS and subsequent mapping. The potential of Remote Sensing (RS) and Geographical Information Systems (GIS) in forest/land cover mapping is very well recognized. Therefore, adopting the developed harmonized legends for the study area, land cover mapping was done using RS-GIS approach.     

Multifrequency algorithms for precise point positioning: MAP3

We present the new MAP3 algorithms to perform static precise point positioning (PPP) from multifrequency and multisystem GNSS observations. MAP3 represents a two-step strategy in which the least squares theory is applied twice to estimate smoothed pseudo-distances, initial phase ambiguities, and slant ionospheric delay first, and the absolute receiver position and its clock offset in a second adjustment. Unlike the classic PPP technique, in our new approach, the ionospheric-free linear combination is not used. The combination of signals from different satellite systems is accomplished by taking into account the receiver inter-system bias. MAP3 has been implemented in MATLAB and integrated within a complete PPP software developed on site and named PCube. We test the MAP3 performance numerically and contrast it with other external PPP programs. In general, MAP3 positioning accuracy with low-noise GPS dual-frequency observations is about 2.5 cm in 2-h observation periods, 1 cm in 10 h, and 7 mm after 1 day. This means an improvement in the accuracy in short observation periods of at least 7 mm with respect to the other PPP programs. The MAP3 convergence time is also analyzed and some results obtained from real triple-frequency GPS and GIOVE observations are presented.     

Generation of Vegetation Fraction and Surface Albedo Products Over India from Ocean Colour Monitor (OCM) Data Onboard Oceansat-2

The use of Local Area Coverage (LAC) data from Ocean Color Monitor (OCM) sensor of Oceansat-2 with its high radiometric resolution (12 bits/pixel) and 2-day repeat cycle for rapid monitoring of vegetation growth and estimating surface albedo for the Indian region is demonstrated in this study. For the vegetation monitoring, normalized difference vegetation index (NDVI) and vegetation fraction (VF) products were estimated by maximum value composite approach fortnightly and were resampled to 1 km. The surface albedo products were realized by converting narrow-band eight-band spectral reflectance OCM data to a) visible (300–700 nm) and b) broad band (300–3,000 nm) data. For validation, the derived products were compared with respective MODIS global products and found to be in good agreement.     

AN EXPERIMENT IN AUTOMATED INTERPRETATION OF REMOTE SENSING IMAGERY

Algorithms, designed for digital image processing in standard mainframe computers and representing sequential stages in a land-use classification procedure, are used to produce maps of agricultural crop types from multispectral satellite imagery. Pixel reflectance values are first grouped according to an unsupervised “rapid classification algorithm,” or data compression procedure. Mean reflectance values of the resulting classes then go into a supervised “sequential clustering algorithm” where classes are refined according to training value and other parameter inputs. The objective is to increase the accessibility of automated image interpretation while balancing classification accuracy and processing time. Translated from: Vestnik Moskovskogo Universiteta, geografiya, 1984, No. 4, pp. 63-69.     

Hydrological and hydrodynamic modeling for flood damage mitigation in Brahmani–Baitarani River Basin,India

Stream flow forecast and its inundation simulations prior to the event are an effective and non-structural method of flood damage mitigation. In this paper, a continuous simulation hydrological and hydrodynamic model was developed for stream flow forecast and for spatial inundation simulation in Brahmani–Baitarani river basin, India. The hydrologic modelling approach includes rainfall-run-off modelling, flow routing, calibration and validation of the model with the field discharge data. CARTOSAT Digital Elevation Model of 30 m resolution, land use/land cover derived from the Indian Remote Sensing Satellite (IRS-P6) AWiFS and soil textural data of the study area were used in the modelling to compute topographic and hydraulic parameters. The hydrological model was calibrated with the help of field observed discharge data of 2006 and 2009 and validated with the data of 2008 and 2011. From the results, it is found that computed discharges are very well matching well with the observed discharges. The developed model can provide the stream flow forecast with more than 30 h lead time. Possible flood inundations were simulated using hydrodynamic modelling approach. CARTO Digital Elevation Model of 10 m resolution, landuse and the computed flood hydrographs were used in inundation simulations.     

A comparative analysis of pansharpening techniques on QuickBird and WorldView-3 images

Nowadays, different image pansharpening methods are available, which combine the strengths of different satellite images that have different spectral and spatial resolutions. These different image fusion methods, however, add spectral and spatial distortions to the resultant images depending on the required context. Therefore, a careful selection of the fusion method is required. Simultaneously, it is also essential that the fusion technique should be efficient to cope with the large data. In this paper, we investigated how different pansharpening algorithms perform, when applied to very high-resolution WorldView-3 and QuickBird satellite images effectively and efficiently. We compared these 27 pansharpening techniques in terms of quantitative analysis, visual inspection and computational complexity, which has not previously been formally tested. In addition, 12 different image quality metrics available in literature are used for quantitative analysis purpose.     

Analysis of urban built-up areas and surface urban heat island using downscaled MODIS derived land surface temperature data

Regional scale urban built-up areas and surface urban heat islands (SUHI) are important for urban planning and policy formation. Owing to coarse spatial resolution (1000 m), it is difficult to use Moderate Resolution Imaging Spectroradiometer (MODIS) Land surface temperature (LST) products for mapping urban areas and visualization, and SUHI-related studies. To overcome this problem, the present study downscaled MODIS (1000 m resolution)-derived LST to 250 m resolution to map and visualize the urban areas and identify the basic components of SUHI over 12 districts of Punjab, India. The results are compared through visual interpretation and statistical procedure based on similarity analysis. The increased entropy value in the downscaled LST signifies higher information content. The temperature variation within the built-up and its environs is due to difference in land use and is depicted better in the downscaled LST. The SUHI intensity analysis of four cities (Ludhiana, Patiala, Moga and Vatinda) indicates that mean temperature in urban built-up core is higher (38.87 °C) as compared to suburban (35.85 °C) and rural (32.41 °C) areas. The downscaling techniques demonstrated in this paper enhance the usage of open-source wide swath MODIS LST for continuous monitoring of SUHI and urban area mapping, visualisation and analysis at regional scale. Such initiatives are useful for the scientific community and the decision-makers.