Atmospheric Surface-Layer Processes During the Total Solar Eclipse Of 11 August 1999

The central path of the total solar eclipse (TSE) of 11 August 1999 mostly passedthrough a region of active monsoon in India, with the eclipse ending around localsunset. Measurements in the surface layer (SL) were carried out close to the eclipseaxis at Akola (20°42' N, 77°2' E) in central India. The globalradiation flux reaching the surface vanishes around totality at 1803:24 (LT), followedby a small recovery before again dipping to zero at sunset. The temperatures in the SL, and subsoil at 50-mm depth, show a local minimum with a lag of about 10 min after the second contact, whereas the lag appears to vanish when the temperature series is detrended. The SL exhibits near-neutral, though generally stable, conditions from about 1500 hr itself due to heavy cloud cover followed by the eclipse-induced cooling of the surface. The wind component across the eclipse axis vanishes at totality, the wind vector aligning with the azimuth of the traversing moon shadow. The deceleration of the mean flow can be due to the combined effect of the colder surface and downward heat flux, where the locally altered horizontal temperature gradients may cause, as in this instance, the cessation of the cross flow.The oscillations in temperature and wind that show significant peaks, around 90–100 min as well as the semi-period of the eclipse near 60 min, persist for several hours past the eclipse event. A fresh analysis of the published data on the TSE of 7 March 1970 shows spectral peaks in the temperature nearly coincident with those already reported from the surface pressure records. The oscillations in the SL fields during the two TSE events are very similar implying that the source mechanism is also likely to be the same in both the cases.     

Determination of Area-Averaged Water Vapour Fluxes with Large Aperture and Radio Wave Scintillometers over a Heterogeneous Surface – Flevoland Field Experiment

A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Modelling evaporation using an artificial neural network algorithm

This paper investigates the prediction of Class A pan evaporation using the artificial neural network (ANN) technique. The ANN back propagation algorithm has been evaluated for its applicability for predicting evaporation from minimum climatic data. Four combinations of input data were considered and the resulting values of evaporation were analysed and compared with those of existing models. The results from this study suggest that the neural computing technique could be employed successfully in modelling the evaporation process from the available climatic data set. However, an analysis of the residuals from the ANN models developed revealed that the models showed significant error in predictions during the validation, implying loss of generalization properties of ANN models unless trained carefully. The study indicated that evaporation values could be reasonably estimated using temperature data only through the ANN technique. This would be of much use in instances where data availability is limited. Copyright © 2002 John Wiley & Sons, Ltd.     

Impact of Southern Oscillation on the Frequency of Monsoon Depressions in the Bay of Bengal

The impact of Southern Oscillation on thecyclogenesis over the Bay of Bengal duringthe summer monsoon has been investigated.The analysis of correlation coefficients(CCs) between the frequency of monsoondepressions and the Southern OscillationIndex (SOI) reveals that more depressionsform during July and August of El Niñoyears. Due to this, the seasonal frequencyof monsoon depressions remains little higherduring El Niño epochs even though thecorrelations for June and September are notsignificant. The CCs for July and August aresignificant at the 99% level.The El Niño-Southern Oscillation (ENSO)is known to affect Indian MonsoonRainfall (IMR) adversely. The enhancedcyclogenesis over the Bay of Bengal duringJuly and August is an impact of ENSO whichneeds to be examined closely. Increasedcyclogenesis over the Bay of Bengal may bereducing the deficiency in IMR duringEl Niño years by producing more rainfallover the eastern parts of India duringJuly and August. Thus there is a considerablespatial variation in the impact of ENSOon the monsoon rainfall over India and El Niñoneed not necessarily imply a monsoonfailure everywhere in India.The area of formation of monsoon depressionsshifts eastward during El Niño years.Warmer sea surface temperature (SST) anomaliesprevail over northwest and adjoiningwestcentral Bay of Bengal during premonsoon andmonsoon seasons of El Niño years.May minus March SOI can provide useful predictionsof monsoon depression frequencyduring July and August.