Numerical simulation of a South China Sea typhoon Leo (1999)

Summary ?A South China Sea typhoon, Leo (1999), was simulated using the Penn State/NCAR mesoscale model MM5 with the Betts-Miller convective parameterization scheme (BMEX). The simulation had two nested domains with resolutions at 54 and 18 km, and the forecast duration was 36 hours. The model was quite successful in predicting the track, the rapid deepening, the central pressure, and the maximum wind speed of typhoon Leo as verified with reports from the Hong Kong Observatory (HKO). The structure of the eye, the eye wall, and the spiral convective cloud band simulated in the model are found to be comparable to corresponding features identified in satellite images for the storm, and also with those reported by other authors. A trajectory analysis was performed. Three kinds of trajectory were found: (1) spirally rising trajectories near the eye wall; (2) spirally rising/descending trajectories in the convective/cloud free belt; (3) straight and fast rising trajectories in a heavy convection zone along one of the cloud bands on the periphery of the tropical cyclone. Both the HKO and the U.S. Joint Typhoon Warning Center (JTWC) reported the rapid deepening of Leo started around 00 UTC 29 April. In the model, the eye was first formed in the lower troposphere, and it extended to the upper troposphere within a few hours. We speculate that the spin-up of cyclonic rotation in the low-level eye enhanced the positive vorticity along the low-level eye wall. The positive vorticity was then transported to the upper troposphere by convection, leading to an extension and growth of the eye into the upper troposphere. To examine the impact of convective parameterization scheme (CPS) on the simulation, the Grell scheme (GLEX) was also tested. The GLEX predicted a weaker typhoon with a wilder eye that extended not as high up in the upper troposphere as BMEX. The different structures of the eye between the BMEX and GLEX suggest that the mesoscale features of the eye are dependent on the convection. In other words, the vertical and horizontal distribution of convective heating is essential to the development and structure of the eye. Received December 18, 2001; accepted May 7, 2002 Published online: March 20, 2003     

Removal of diazinon pesticide from aqueous solutions using MCM-41 type materials: isotherms,kinetics and thermodynamics

In this research, ordered mesoporous silica, including MCM-41, was synthesized via sol–gel process and a propyl methacrylate-modified ordered mesoporous silica (MPS-MCM-41) was successfully synthesized via a postsynthesis grafting process. Then both MCM-41 and MPS-MCM-41 were characterized using FTIR, XRD, SEM and BET techniques. The synthesized materials were utilized as adsorbent for removal of diazinon pesticide from aqueous solutions. The effects of pH, contact time, adsorbent dose, initial concentration and temperature have been evaluated using removal efficiencies. Also, the kinetic, thermodynamic and isotherm models of diazinon adsorption were studied for the both MCM-41 and MPS-MCM-41. The results showed that the maximum adsorption capacities are 142 and 254 mg g^?1 for the MCM-41 and MPS-MCM-41, respectively, at the initial concentration of 50 mg L^?1, temperature of 298 K and adsorbent dose of 0.1 g L^?1. The highest percentages of diazinon removal are 56.4 and 87.2 (at adsorbent dose of 2 g L^?1 and the temperature of 318 K) for the MCM-41 and MPS-MCM-41, respectively. The Freundlich and Langmuir models are more compatible for describing equilibrium data of the diazinon adsorption capacity on the MCM-41 and MPS-MCM-41, respectively. Thermodynamic study indicated that the adsorption process of diazinon onto MCM-41 and MPS-MCM-41 is exothermic and has a spontaneous nature. The higher adsorption capacity and higher spontaneous nature of MPS-MCM-41 in comparison with MCM-41 might be due to the presence of the both hydrogen bonding and hydrophobic interaction between surface functional groups of MPS-MCM-41 (hydroxyl and propyl methacrylate) and diazinon functional groups.     

Mineral magnetic signatures in a long core from Lake Qarun, Middle Egypt

The analysis and interpretation of changes in mineral magnetic signatures from a long (ca. 8.2 m) sedimentary sequence recovered from Lake Qarun, Middle Egypt in 2003 spanning a timescale of approximately the last 2,000 years is reported. A suite of mass specific susceptibility and magnetic remanence measurements were made at irregular intervals downcore on 39 samples. These samples were selected on the basis of trends and abrupt changes in whole-core magnetic susceptibility measured using a Bartington^® MS2E sensor and were analysed for low and high temperature loss on ignition and their particle size distribution. Trends in all mineral magnetic concentration parameters are remarkably similar and were initially used to divide the core into three magnetically distinct zones. The upper and lower sections of the core (0–119 cm and 445–822 cm depth) are characterised by low values for all magnetic concentration parameters. Between 153 and 380 cm depth, concentration parameters are considerably higher, although somewhat variable. The S ratio and percentage loss of remanence after 24 h (IRM_loss) follow a different trend and are inversely related to each other. A low S ratio (<0.7) is associated with a loss of remanence of >4%. On the basis of these parameters, the core can be divided into four zones, and differences in magnetic mineralogy between these four zones were confirmed by measurement of IRM acquisition curves. The major difference between concentration parameters and ratios or percentage loss of IRM lies in the identification of an additional zone below 619 cm depth where the S ratio is high and IRM_loss is low. There is little evidence to suggest that the magnetic signatures are controlled by particle size or by trends in organic matter and/or carbonate content. The signatures appear to be predominantly detrital and show little evidence of post-depositional alteration through dissolution or authigenic addition of bacterial magnetite or greigite. Analysis of Saharan dust deposition rates in Northern Egypt suggests that atmospheric fallout is likely to make only a very minor contribution (<1%) to sedimentation rates in Lake Qarun. The downcore trends therefore appear to reflect major changes in fluvial sediment sources over the ca. 2,000 year time period spanned by this ～8 m core. Preliminary mineral magnetic characterisations of potential local sources suggest that these cannot account for the range of signatures recorded in the Qarun sediments and it is hypothesised that these sediments are derived from Nile river floods.     

Algal Dynamics in Relation to Physico-Chemical Factors in a High Altitude Pond of Shillong,India

A one year phycological study of a high altitude pond has been made with a view to studying the algal dynamics as affected by physico-chemical characteristics of the water. This has revealed the presence of 34 genera of algae belonging to Chlorophyta, Bacillariophyta, Cyanophyta, and Euglenophyta. Chlorophytes were the most dominant and diatoms the most frequent representatives of algae. The community diversity along with water chemistry are indicative of the oligotrophic nature of this pond.     

Influence of magnetic effect,anisotropy, irregularity,initial stress and heterogeneity on propagation of SH-wave in an irregular pre-stressed magnetoelastic monoclinic sandwiched layer

Monoclinic materials viz. quartz, lithium niobate and lithium tantalate are among the most abundant materials, finding numerous applications throughout the technological world. Moreover, the presence of irregularity, initial stresses, anisotropy and heterogeneity in a material medium is obvious. These facts motivate the study of magnetoelastic SH-wave propagation in an irregular monoclinic sandwiched layer between a heterogeneous isotropic layer and an isotropic half space, all under initial stress. The heterogeneity in the uppermost layer is caused due to exponential variation in rigidity, density and initial stress in terms of space variable pointing vertically downward. The dispersion relation has been obtained using first-order perturbation technique. The substantial effect of wave number, anisotropy, irregularity, width ratio of the layers, horizontal compressive/tensile initial stresses, heterogeneity and monoclinic-magnetoelastic coupling parameter associated with sandwiched layer on phase velocity of SH-wave has been studied and depicted by means of graph. Comparative study made for the case when pre-stressed irregular sandwiched layer is monoclinic-magnetoelastic to the case when it is isotropic magnetoelastic layer is one of the major highlights of the current study.     

Impact melting of the Cachari eucrite 3.0 Gy ago

Both the host phase and glass veins of the Cachari eucrite have been analyzed by microprobe and neutron activation analysis for their chemical compositions and by mass spectrometry for their ³⁹Ar-⁴⁰Ar gas retention ages. Cachari is chemically similar to other non-cumulate eucrites. The vesicular glass veins vary from pure glass, to devitrified glass, to areas that are substantially crystalline. The glassy areas have nearly the same concentrations of major and trace elements as the unmelted portions of Cachari, but some differences, probably due to preferential dissolution, occur along melt contacts. The glass formed by shock melting of Cachari host or of rock identical to it. ³⁹Ar-⁴⁰Ar data for the host and glass suggest distinctly different ages of 3.04 ±.07 Gy and 3.47 ±.04 Gy, respectively. The time of glass formation, which may also be the time of brecciation, is most likely given by the 3.0 Gy age of the host. The higher age for the glass is interpreted to represent incomplete Ar degassing during the 3.0 Gy event due to the greater resistance to Ar diffusion shown by the glass compared to the host. Event ages significantly younger than 4.5 Gy have now been determined for several eucrites and howardites and suggest a long dynamic regolith history for the parent body.     

Estimation and comparison of leaf area index of agricultural crops using irs liss-III and EO-1 hyperion images

Motivated by the increasingly availability and importance of hyperspectral remote sensing data, this study aims to determine whether current generation narrowband hyperspectral remote sensing data could be used to estimate vegetation Leaf Area Index (LAI) accurately than the traditional broadband multispectral data. A comparative study has been carried out to evaluate the performance of the narrowband Normalized Difference Vegetation Index (NDV1) derived from Hyperion hyperspectral sensor with that of derived from IRS LISS-III for the estimation of LAI of some major agricultural crops (e.g. cotton, sugarcane and rice) in part of Guntur district, India. It has been found that the narrowband NDVI derived from Hyperion has shown better results over its counterpart derived from broadband LISS-III. Linear regression models have been used which with selected subsets of individual Hyperion bands performed better to predict LAI than those based on the broadband datasets, although the potential to overfit models using the large number of available Hyperion bands is a concern for further research.     

马尾藻褐藻胶的研究 1.海蒿子(Sargassum pallidum)褐藻胶的提取条件

1881年Stanford首次自海带类海藻加碱提取出一种胶质,命名为“Algin”(褐藻胶),并对它的化学性质进行了初步研究。后来经过许多化学家对这种胶质的化组成和结构进行了多年的研究,才确定褐藻胶是一种主要由?-D甘露糖醛酸残基通过1,4位碳原子互相键合的多糖。"褐藻胶"这一名词在广义上包括水不溶性的褐藻酸、与多价金属离子构成的水不溶性褐藻酸盐类、以及与碱金属离子或铵基构成的水溶性褐藻酸盐类;狭义的说来,则指褐藻酸纳而言,因为市场上的商品主要是纳盐。