CLEAN: project overview on CO2 large-scale enhanced gas recovery in the Altmark natural gas field (Germany)

The joint research project CLEAN was conducted in the years 2008?C2011 by a German research and development (R&D) alliance of 16 partners from science and industry. The project was set-up as pilot project to investigate the processes relevant to enhanced gas recovery (EGR) by the injection of CO₂ into a subfield of the almost depleted Altmark natural gas field. Despite the setback that permission for active injection was not issued by the mining authority during the period of the project, important results fostering the understanding of processes linked with EGR were achieved. Work carried out led to a comprehensive evaluation of the EGR potential of the Altmark field and the Altensalzwedel subfield in particular. The calculated safety margins emphasize that technical well integrity of the 12 examined boreholes is given for EGR without a need for any further intervention. The laboratory and field tests confirm that the Altensalzwedel subfield is suitable for the injection of 100,000?t of CO₂. Numerical simulations provide sound predictions for the efficiency and safety of the EGR technology based on the CO₂ injection. The development and testing of different monitoring techniques facilitate an improved surveying of CO₂ storage sites in general. The CLEAN results provide the technological, logistic and conceptual prerequisites for implementing a CO₂-based EGR project in the Altmark and provide a benchmark for similar projects in the world.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

CO<Subscript>2</Subscript>-assisted removal of nutrients from municipal wastewater by microalgae <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Scenedesmus obliquus</Emphasis>

Axenic culture of microalgae Chlorella vulgaris ATCC^® 13482 and Scenedesmus obliquus FACHB 417 was used for phycoremediation of primary municipal wastewater. The main aim of this study was to measure the effects of normal air and CO₂-augmented air on the removal efficacy of nutrients (ammonia N and phosphate P) from municipal wastewater by the two microalgae. Batch experiments were carried out in cylindrical glass bottles of 1 L working volume at 25 °C and cool fluorescent light of 6500 lux maintaining 14/10 h of light/dark cycle with normal air supplied at 0.2 L min^?1 per liter of the liquid for both algal strains for the experimental period. In the next set of experiments, the treatment process was enhanced by using 1, 2 and 5% CO₂/air (vol./vol.) supply into microalgal cultures. The enrichment of inlet air with CO₂ was found to be beneficial. The maximum removal of 76.3 and 76% COD, 94.2 and 92.6% ammonia, and 94.8 and 93.1% phosphate after a period of 10 days was reported for C. vulgaris and S. obliquus, respectively, with 5% CO₂/air supply. Comparing the two microalgae, maximum removal rates of ammonia and phosphate by C. vulgaris were 4.12 and 1.75 mg L^?1 day^?1, respectively, at 5% CO₂/air supply. From kinetic study data, it was found that the specific rates of phosphate utilization (q _phsophate) by C. vulgaris and S. obliquus at 5% CO₂/air supply were 1.98 and 2.11 day^?1, respectively. Scale-up estimation of a reactor removing phosphate (the criteria pollutant) from 50 MLD wastewater influent was also done.     

Coulometric total carbon dioxide analysis for marine studies: maximizing the performance of an automated gas extraction system and coulometric detector

A global survey of the distribution of dissolved CO₂ taking advantage of sampling opportunities provided by the World Ocean Circulation Experiment: World Hydrographic Program (WOCE-WHP) is being carried out through 1995. Goals include the measurement of oceanic inorganic carbon transport and the development of a data base from which future fossil-fuel CO₂ build-up can be monitored. The analytical method selected for total carbon dioxide (C_T) is gas extraction of acidified seawater with coulometric titration of the acid formed by the resultant carbon dioxide and monoethanolamine. To combine high accuracy and precision (± 1.5 μmol/kg for C_T ≥ 2000 μmol/kg) with a high rate of analysis, we have modified an automated single-parameter system. Following prototype development between 1987 and 1990, an instrument emerged with the acronym Somma standing for single-operator multiparameter metabolic analyzer. Improved functional and operating procedures have integrated electronic calibration, CO₂ gas calibration, and sample analysis with automated pressure, temperature, and conductivity (salinity) sensing into a single convenient transportable package.     

Mineral magnetic characterization of the Godavari river sediments: Implications to Deccan basalt weathering

Mineral magnetic analysis including thermo-magnetic studies and clay mineralogy on bed load and floodplain sediments from the Godavari river indicate distinct mineral assemblages. The floodplain sediments up to the delta region are characterised by unimodal ferrimagnetic mineralogy marked by the presence of maghemite and single domain magnetites derived from Deccan basalts. On the other hand the bed loads show varied magnetic mineral assemblages depicting greater local mixing from the non-basaltic bedrock province. The temperature dependent magnetic susceptibility and clay mineralogy of the floodplain samples show titanomagnetites (Fe₃O₄-Fe₂TiO₄), maghemite (χ _LF-Fe₂O₃) and smectite that are characteristic of the Deccan Volcanic Province (DVP). Presence of this ferrimagnetically dominant unimodal assemblage up to the delta region and probably into the Bay of Bengal off the Godavari river is attributed to extensive chemical weathering of the basalt. The quantitative approach of mineral magnetism, therefore, can be used to study the paleomonsoon variability and its relation to Deccan basalt weathering from the Godavari-Bengal fan system.     

Age of the Marwar Supergroup,NW India:A note on the U–Pb geochronology of Jodhpur Group felsic volcanics

The Marwar Supergroup(NW Peninsular India)is thought to be of Ediacaran-Cambrian age,based on previous paleontological and geochronological studies.However,direct constraints on the onset of sedimentation within the Marwar basin are still scarce.In this study,we report U–Pb zircon,LA-ICP-MS,and SIMS ages from the Chhoti Khatu felsic volcanic rocks,interlayered with the Jodhpur Group sandstones(Lower Marwar Supergroup).The cathodoluminescence images of the zircons indicate complex morphologies,and core-rim textures coupled with the wide range of ages indicate that they are likely inherited or in the case of thin poorly indurated ash-beds,detrital in origin.The age spectra of 68 zircon analyses from our sampling display a dominant 800–900 Ma age peak corresponding to the age of basement"Erinpura granite"rocks in the region.The youngest inherited zircon from a felsic ash layer yielded a U–Pb age of651 Ma±18 Ma that,together with previous studies and paleontological evidence,indicates a postCryogenian age for the initiation of Marwar sedimentation following a~125 Ma hiatus between the end of Malani magmatism and Marwar deposition.     

Staurolite as an isotopic U–Pb geochronometer

A new approach is suggested for measuring the real U–Pb and Pb–Pb ages of rock-forming metamorphic staurolite. Previously, two approaches have been used for this purpose: (1) measurement of the lead isotopic compositions, uranium and lead contents in leach substance as a product of the step-leaching technique; age is calculated by plotting the Pb–Pb leaching isochron; and (2) lead and uranium isotopic compositions are measured in completely dissolved mineral material without leaching. In both cases, it is assumed a priori that inclusions, overgrowths, secondary phases, and the host mineral are cogenetic. This assumption may lead to errors in the measured age. The technique suggested in this paper uses various reagents (acids) to purify staurolite from the above-mentioned secondary phases while obtaining a staurolite “pure culture,” its subsequent disolution, introduction of the mixed spike, separation of lead and uranium compounds, and, finally, estimation of a real staurolite age using several samples to plot the monomineralic Pb–Pb isochron or by plotting measured Pb/U ratios in the diagram with concordia. The data can be used then to reconstruct the P–T–t evolution of metamorphism.     

The Dammam aquifer in Bahrain – Hydrochemical characterization and alternatives for management of groundwater quality

 Over-abstraction of the Dammam aquifer, the principal aquifer in Bahrain, by the agricultural and domestic sectors, has led to its salinization by adjacent brackish and saline water bodies. A hydrochemical study identified the locations of the sources of aquifer salinization and delineated their areas of influence. The investigation indicates that the aquifer water quality is significantly modified as groundwater flows from the northwestern parts of Bahrain, where the aquifer receives its water by lateral underflow from eastern Saudi Arabia, to the southern and southeastern parts. Four types of salinization of the aquifer are identified: brackish-water up-flow from the underlying brackish-water zones in north-central, western, and eastern regions; seawater intrusion in the eastern region; intrusion of sabkha water in the southwestern region; and irrigation return flow in a local area in the western region. Four alternatives for the management of groundwater quality that are available to the water authorities in Bahrain are discussed and their priority areas are proposed, based on the type and extent of each salinization source, in addition to groundwater use in that area. The effectiveness of the proposed management options in controlling the degradation of water quality in the Dammam aquifer should be evaluated using simulation modeling. Received: June 1998 Revised: November 1998 Accepted: December 1998     

Determination of surface layer parameters at the edge of a suburban area

Vertical wind and air temperature profile related parameters in the surface layer at the edge of suburban area of Zagreb (Croatia) have been considered. For that purpose, adopted Monin–Obukhov similarity theory and a set of observations of wind and air temperature at 2 and 10?m above ground, recorded in 2005, have been used. The root mean square differences (errors) principle has been used as a tool to estimate the effective roughness length as well as standard deviations of wind speed and wind gusts. The results of estimation are effective roughness lengths dependent on eight wind direction sectors unknown before. Gratefully to that achievement, representativeness of wind data at standard 10-m height can be clarified more deeply for an area of at least about 1?km in upwind direction from the observation site. Extrapolation of wind data for lower or higher levels from standard 10-m height are thus properly representative for a wider inhomogeneous suburban area and can be used as such in numerical models, flux and wind energy estimation, civil engineering, air pollution and climatological applications.