Characteristics of plasma temperature variation during two-current-loop collisions

Characteristics of plasma temperature variations during two-current-loop collisions are described. It is revealed that plasma temperature has an oscillatory feature with damping amplitude and growing quasi-period in the case of anI-type collision. In the case of aY-type collision, if the initial current becomes strong enough, there also occur pulsations of the temperature. However, the temperature profile of anX-type collision is characterized by a single pulse only.     

A model of thermal convection in the major planets with a strongly density-stratified atmospheric layer

Abstract

As an extension of a model by Busse (1983a), a two-layer model of thermal convection in the self-gravitating rotating spherical fluid is considered. The upper layer with arbitrary vertical distributions of density and potential temperature representing the atmospheric layer of major planets is imposed on the spherical Boussinesq fluid. The Prandtl number P and the ratio of the mass of the upper layer to that of the lower layer are used as small expansion parameters. The modification of the critical Rayleigh number by imposing the upper layer are clearly separated into two parts, proportional to (1) the mass of the upper layer and to (2) an integral representing a measure of convective instability of the upper layer. Some implications for atmospheric dynamics of the major planets are also presented.     

Geochemistry of late Cenozoic lavas on Kunashir Island, Kurile Arc

Middle Miocene to Quaternary lavas on Kunashir Island in the southern zone of the Kurile Arc were examined for major, trace, and Sr–Nd–Pb isotope compositions. The lavas range from basalt through to rhyolite and the mafic lavas show typical oceanic island arc signatures without significant crustal or sub-continental lithosphere contamination. The lavas exhibit across-arc variation, with increasingly greater fluid-immobile incompatible element contents from the volcanic front to the rear-arc; this pattern, however, does not apply to some other incompatible elements such as B, Sb, and halogens. All Sr–Nd–Pb isotope compositions reflect a depleted source with Indian Ocean mantle domain characteristics. The Nd and Pb isotope ratios are radiogenic in the volcanic front, whereas Sr isotope ratios are less radiogenic. These Nd isotope ratios covary with incompatible element ratios such as Th/Nd and Nb/Zr, indicating involvement of a slab-derived sediment component by addition of melt or supercritical fluid capable of mobilizing these high field-strength elements and rare earth elements from the slab. Fluid mobile elements, such as Ba, are also elevated in all basalt suites, suggesting involvement of slab fluid derived from altered oceanic crust. The Kurile Arc lavas are thus affected both by slab sediment and altered basaltic crust components. This magma plumbing system has been continuously active from the Middle Miocene to the present.     

The Impact of Orographically-Induced Gravity Wave on the Diurnal Cycle of Rainfall over Southeast Kalimantan Island

Precipitation measurements from the Tropical Rainfall Measuring Mission (TRMM) satellite indicate that the southeastern area of Kalimantan (Borneo) Island receives much less rainfall than elsewhere on the island during the period from July to October.Results from sur-face meteorological observations show that the diurnal cycle of rainfall differs greatly between the eastern and western coasts of the island.Rainfall on the western coast of the island is frequent in the afternoon and evening,whereas almost all rainfall on the eastern coast occurs in the morning.Meanwhile,the Global Positioning System (GPS)-derived precipitable water (PW) on the eastern coast shows a substantial decrease in moisture in the af-ternoon and evening.Numerical experiments with a mesoscale model reveal that gravity waves driven by di-urnal heating of the elevated land surface of the moun-tains on Sulawesi Island,which lies approximately 300 kilometers to the east of Kalimantan Island,significantly affect the diurnal cycle of rainfall over southeast Kali-mantan Island.     

Distribution of fault rocks in the fracture zone of the Nojima Fault at a depth of 1140 m: Observations from the Hirabayashi NIED drill core

Abstract Characteristics of deformation and alteration of the 1140 m deep fracture zone of the Nojima Fault are described based on mesoscopic (to the naked eye) and microscopic (by both optical and scanning electron microscopes) observations of the Hirabayashi National Research Institute for Earth Science and Disaster Prevention (NIED) drill core. Three types of fault rocks; that is, fault breccia, fault gouge and cataclasite, appear in the central part of the fault zone and two types of weakly deformed and/or altered rocks; that is, weakly deformed and altered granodiorite and altered granodiorite, are located in the outside of the central part of the fault zone (damaged zone). Cataclasite appears occasionally in the damaged zone. Six distinct, thin foliated fault gouge zones, which dip to the south-east, appear clearly in the very central part of the fracture zone. Slickenlines plunging to the north-east are observed on the surface of the newest gouge. Based on the observations of XZ thin sections, these slickenlines and the newest gouge have the same kinematics as the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake), which was dextral-reverse slip. Scanning electron microscopy observations of the freeze-dried fault gouge show that a large amount of void space is maintained locally, which might play an important role as a path for fluid migration and the existence of either heterogeneity of pore fluid pressure or strain localization.     

Early diagenesis of fatty acids in lacustrine sediments—III. Changes in fatty acid composition in the sediments from a brackish water lake

A 3-m sediment core taken from Lake Suigetsu, in which a shift from fresh to brackish water occurred about three hundred years ago, has been examined for variation with depth of organic carbon and fatty acids. From the difference in total amounts of sulphur between sediments under fresh and brackish water environments, the surface sediments above approximately 35 cm depth were deduced to be accumulated under a brackish water environment. The total contents of organic carbon and fatty acids, and percentage composition of fatty acids gave discontinuous profiles above and below the 35–40 cm sediment layer. At a depth of 12.5 cm, the distribution in chain length of the fatty acids changed from a unimodal (the predominance of C₁₂-C₁₈ over C₂₀-C₃₄) to a bimodal pattern, which was mirrored by the composition diversity index (CDI).Although the fatty acids in the surface sediments (0–40 cm) from Lake Suigetsu seemed to suffer milder degradation through microbial activity than those in a core (0–150 cm) from Lake Suwa, a freshwater eutrophic lake, both lacustrine sediments showed similar trends in the alteration of fatty acid composition with depth.     

Recent formations and their basal topography in and around Tokyo Bay,central Japan

This paper summarizes the subsurface geology of the recent (both $\text{Holocene}$ and latest $\text{Pleistocene}$ formations and the buried topography beneath them in and around Tokyo Bay, the type area of the late Quaternary in Japan. Buried abrasion platforms in the buried topography are classified into upper (ca. 0 to ?10 m high) and lower (ca. ?20 to ?40 m) platforms; upper and lower buried river terraces are also distinguished, and are correlated to the subaerial late Pleistocene terraces of Tc₁ and Tc₂, respectively. A buried valley system is elucidated, of which the trunk valley floor reaches ?70 m in Tokyo and emerges into a flat surface at the shelf edge in the entrance to Tokyo Bay. Approximate dates for these geomorphic surfaces are given. The height of sea level contemporaneous with the buried valley floor (ca. 20,000–15,000 yr BP) is estimated at about ?135 m. The recent formations are divided into two members, upper and lower, by a middle sand bed, in addition to the lowest buried valley floor gravel. The lower member, which is composed of brackish to marine deposits of complicated lithofacies, was accumulated in narrow drowned valleys during the early stage of the Yurakucho (Flandrian) transgression. The middle sand bed is the foreset bed of deltas, which was formed during a slight regression between ca. 11,000 and 10,000 yr BP. The upper member, which consists mainly of widespread homogeneous marine clay and deltaic sand, was accumulated in a wide bay and its embayments during the late stage of the Yurakucho transgression and the following stage of a relatively stable sea level.     

The structure of cool accretion disks in semidetached binaries

We present a qualitative analysis of possible changes in the structure of accretion disks that occur in the transition from hot to cool disks. We suggest that an additional spiral-density wave can exist in the inner parts of the disk, where gas-dynamical perturbations are negligible. We consider the formation of this wave and its parameters. The results of a three-dimensional gas-dynamical simulation of a cool accretion disk are presented; these results confirm the possibility of the formation of a new, “precessional,” spiral wave in the inner regions of a cool accretion disk. Possible observational manifestations of such a wave are discussed.     

Geology and geochemistry of Karasugasen lava dome, Daisen–Hiruzen Volcano Group, southwest Japan

Abstract   The geology and geochemistry of pyroclastic flows and fallout tephras formed during the Karasugasen dome eruption in the Daisen–Hiruzen Volcano Group in southwest Japan have been examined in detail. The Karasugasen lava dome erupted at about 26 ka. The eruption began with a vulcanian ash fall, and this was followed by at least eight block and ash flows and a pumice flow. The block and ash flows were produced by the successive collapses of a growing lava dome. This main eruption phase was followed by an eruption of vulcanian ash falls, and finally ended with a sub-Plinian pumice fall. This eruption sequence is typical of the Daisen Volcano during the last three eruption events, which occurred at 58, 26 and 17 ka. The magma produced during the Karasugasen eruption was a typical adakite, with extremely high Sr/Y ratios and low HREE/LREE ratios compared to normal arc lavas. The chemistry of the Karasugasen lavas is almost identical to other Daisen–Hiruzen lavas that were produced from eruptions over an interval of a million years. The continuous supply of a huge amount of adakitic magma (>100 km³) for such a long period suggests a massive homogeneous source material, such as molten Philippine Sea Plate slab. Slab melting is a plausible mechanism for the production of the adakitic lavas at Karasugasen, and hence the Daisen–Hiruzen Volcano Group.