A 256×256 pixel InSb FPA for SIRTF and other astronomical applications

As part of the NASA Space Infrared telescope Facility (SIRTF), a low noise multiplexer has been developed. The hybridization of this multiplexer to a high indium antimonide (InSb) photodiode array has resulted in a MWIR detector of outstanding performance. The multiplexer is made of a 256×256 array of source follower amplifiers on a 30 m square pitch. Random access binary decoders are used to access each pixel of the array, allowing any read-out scheme to be implemented. Dark current has been measured at temperatures ranging from 4K to 77K. Generation recombination currents dominate above 45K. With 100mV of reverse bias applied, less than 3×10^-17 A is typical below 50K with 8×10^-19 A (5 e^-/s) at 4K. Under the same conditions 0.25 pA was measured at 77K. Read noise has been measured as low as 186 e^- using non-correlated techniques. Detector QE is 50 to 80 % through the entire 1 to 5 m band.     

An integrable case of a rotational motion analogous to that of Lagrange and Poisson for a gyrostat in a Newtonian force field

The scope of the present paper is to provide analytic solutions to the problem of the attitude evolution of a symmetric gyrostat about a fixed point in a central Newtonian force field when the potential function isV ⁽²⁾.We assume that the center of mass and the gyrostatic moment are on the axis of symmetry and that the initial conditions are the following: (t ₀)=₀, (t ₀)=₀, (t ₀)=(t ₀)=₀, ₁(t ₀)=0, ₂(t ₀)=0 and ₃(t ₀)= ₃ ⁰ .The problem is integrated when the third component of the total angular momentum is different from zero (B ₁ 0). There now appear equilibrium solutions that did not exist in the caseB ₁=0, which can be determined in function of the value ofl ₃ ^r (the third component of the gyrostatic momentum).The possible types of solutions (elliptic, trigonometric, stationary) depend upon the nature of the roots of the functiong(u). The solutions for Euler angles are given in terms of functions of the timet. If we cancel the third component of the gyrostatic momentum (l ₃ ^r =0), the obtained solutions are valid for rigid bodies.     

Cryovolcanism on the icy satellites

Evidence of past cryovolcanism is widespread and extremely varied on the icy satellites. Some cryovolcanic landscapes, notably on Triton, are similar to many silicate volcanic terrains, including what appear to be volcanic rifts, calderas and solidified lava lakes, flow fields, breached cinder cones or stratovolcanoes, viscous lava domes, and sinuous rilles. Most other satellites have terrains that are different in the important respect that no obvious volcanoes are present. The preserved record of cryovolcanism generally is believed to have formed by eruptions of aqueous solutions and slurries. Even Triton's volcanic crust, which is covered by nitrogen-rich frost, is probably dominated by water ice. Nonpolar and weakly polar molecular liquids (mainly N₂, CH₄, CO, CO₂, and Ar), may originate by decomposition of gas-clathrate hydrates and may have been erupted on some icy satellites, but without water these substances do not form rigid solids that are stable against sublimation or melting over geologic time. Triton's plumes, active at the time of Voyager 2's flyby, may consist of multicomponent nonpolar gas mixtures. The plumes may be volcanogenic fumaroles or geyserlike emissions powered by deep internal heating, and, thus, the plumes may be indicating an interior that is still cryomagmatically active; or Triton's plumes may be powered by solar heating of translucent ices very near the surface. The Uranian and Neptunian satellites Miranda, Ariel, and Triton have flow deposits that are hundreds to thousands of meters thick (implying highly viscous lavas); by contrast, the Jovian and Saturnian satellites generally have plains-forming deposits composed of relatively thin flows whose thicknesses have not been resolved in Voyager images (thus implying relatively low-viscosity lavas). One possible explanation for this inferred rheological distinction involves a difference in volatile composition of the Uranian and Neptunian satellites on one hand and of the Jovian and Saturnian satellites on the other hand. Perhaps the Jovian and Saturnian satellites tend to have relatively "clean" compositions with water ice as the main volatile (ammonia and water-soluble salts may also be present). The Uranian and Neptunian satellites may possess large amounts of a chemically unequilibrated comet-like volatile assemblage, including methanol, formaldehyde, and a host of other highly water- and ammonia-water-soluble constituents and gas clathrate hydrates. These two volatile mixtures would produce melts that differ enormously in viscosity The geomorphologic similarity in the products of volcanism on Earth and Triton may arise partly from a rheological similarity of the ammonia-water-methanol series of liquids and the silicate series ranging from basalt to dacite. An abundance of gas clathrate hydrates hypothesized to be contained by the satellites of Uranus and Neptune could contribute to evidence of explosive volcanism on those objects.     

Mid-infrared imaging of ultracompact H II regions

We discuss preliminary results of an 11.7 m imaging survey of ultracompact H II regions from the Wood and Churchwell radio survey. We find that that the morphologies of ionized gas and warm dust are often significantly different, indicating that an H II region classification scheme should be based on more than radio data.     

A verification of some methods to determine the fluxes of momentum,sensible heat,and water vapour using standard deviation and structure parameter of scalar meteorological quantities

A set of micro-meteorological data collected over a horizontal, uniform terrain (the plain of La Crau, France) in June 1987 is analysed. Conditions were predominantly sunny and arid, while due to the Mistral the wind speed could exceed 10 m/s. Verification of several methods to evaluate surface fluxes of heat, momentum and water vapour from the standard deviation of temperature, wind and specific humidity is presented. Also, a similar approach using the structure parameter of temperature is considered. These methods are all based on Monin-Obukhov (M-O) similarity theory. It is found that the standard deviation of temperature, vertical and horizontal wind speed as well as the structure parameter for temperature behave according to M-O similarity. It is shown that the sensible heat flux and friction velocity can be determined from a fast response thermometer and a cup anemometer. Also, it appears that the analytic solution of the set of governing equations as derived by the first author yields good results. M-O theory does not appear to work for the standard deviation of specific humidity. This may be due to the relative importance of large eddies.     

Experimental investigation and application of the equilibrium rutile + orthopyroxene = quartz + ilmenite

Equilibria in the Sirf (Silica-Ilmenite-Rutile-Ferrosilite) system: $${\text{SiO}}_{\text{2}} + ({\text{Mg,Fe}}){\text{TiO}}_{\text{3}} {\text{ + (Mg,Fe)SiO}}_{\text{3}} $$ have been calibrated in the range 800–1100° C and 12–26 kbar using a piston-cylinder apparatus to assess the potential of the equilibria for geobarometry in granulite facies assemblages that lack garnet. Thermodynamic calculations indicate that the two end-member equilibria involving quartz + geikielite = rutile + enstatite, and quartz + ilmenite = rutile + ferrosilite, are metastable. We therefore reversed equilibria over the compositional range Fs_40–70, using Ag₈₀Pd₂₀ capsules with \(f_{{\text{O}}_{\text{2}} } \) buffered at or near iron-wüstite. Ilmenite compositions coexisting with orthopyroxene are \(X_{{\text{MgTiO}}_{\text{3}} }^{{\text{Ilm}}} \) of 0.06 to 0.15 and \(X_{{\text{Fe}}_{\text{2}} {\text{O}}_{\text{3}} }^{{\text{Ilm}}} \) of 0.00 to 0.01, corresponding toK _D values of 13.3, 10.2, 9.0 and 8.0 (±0.5) at 800, 900, 1000 and 1100° C, respectively, whereK _D =(XMg/XFe)^Opx/(XMg/XFe)^Ilm. Pressures have been calculated using equilibria in the Sirf system for granulites from the Grenville Province of Ontario and for granulite facies xenoliths from central Mexico. Pressures are consistent with other well-calibrated geobarometers for orthopyroxeneilmenite pairs from two Mexican samples in which oxide textures appear to represent equilibrium. Geologically unreasonable pressures are obtained, however, where oxide textures are complex. Application of data from this study on the equilibrium distribution of iron and magnesium between ilmenite and orthopyroxene suggests that some ilmenite in deep crustal xenoliths is not equilibrated with coexisting pyroxene, while assemblages from exposed granulite terranes have reequilibrated during retrogression. The Sirf equilibria are sensitive to small changes in composition and may be used for determination of activity/composition (a/X) relations of orthopyroxene if an ilmenite model is specified. A symmetric regular solution model has been used for orthopyroxene in conjunction with activity models for ilmenite available from the literature to calculatea/X relations in orthopyroxene of intermediate composition. Data from this study indicate that FeSiO₃?MgSiO₃ orthopyroxene exhibits small, positive deviations from ideality over the range 800–1100°C.     

Biogeochemical cycles of carbon, sulfur, and free oxygen in a microbial mat

Complete budgets for carbon and oxygen have been constructed for cyanobacterial mats dominated by Microcoleus chthonoplastes from the evaporating ponds of a salt works located in Guerrero Negro, Baja California Sur, Mexico. Included in the budget are measured rates of O2 production, sulfate reduction, and elemental exchange across the mat/brine interface, day and night, at various temperatures and times of the year. We infer from this data the various sinks for O2, as well as the sources of carbon for primary production. To summarize, although seasonal variability exists, a major percentage of the O2 produced during the day did not diffuse out of the mat but was used within the mat to oxidize both organic carbon and the sulfide produced by sulfate reduction. At night, most of the O2 that diffused into the mat was used to oxidize sulfide, with O2 respiration of minor importance. During the day, the internal mat processes of sulfate reduction and O2 respiration generated as much or more inorganic carbon (DIC) for primary production as diffusion into the mat. Also, oxygenic photosynthesis was the most important process of carbon fixation, although anoxygenic photosynthesis may have been important at low light levels during some times of the year. At night, the DIC lost from the mat was mostly from sulfate reduction. Elemental fluxes across the mat/brine interface indicated that carbon with an oxidation state of greater than zero was taken up by the mat during the day and liberated from the mat at night. Overall, carbon with an average oxidation state of near zero accumulated in the mat. Both carbon fixation and carbon oxidation rates varied with temperature by a similar amount. These mats are thus closely coupled systems where rapid rates of photosynthesis both require and fuel rapid rates of heterotrophic carbon oxidation.     

The concentration and isotopic composition of carbon in basaltic glasses from the Juan de Fuca Ridge, Pacific Ocean

The abundance and 13C/12C ratios of carbon were analyzed in basaltic glass from twenty locations along the Juan de Fuca Ridge using a 3-step combustion/extraction technique. Carbon released during the first two combustion steps at 400-500 degrees C and 600-650 degrees C is interpreted to be secondary, and only the carbon recovered during a final combustion step at approximately 1200 degrees C is thought to be indigenous to the samples. For carbon released at approximately 1200 degrees C, glasses analyzed as 1-2 mm chips contained 23-146 ppm C with delta 13C values of -4.8 to -9.3%, whereas samples crushed to 38-63 microns or 63-90 microns yielded 56-103 ppm C with delta 13C values of -6.1 to -9.2%. The concentrations and isotopic compositions of the primary carbon dissolved in the glasses and present in the vesicles are similar to those previously reported for other ocean-ridge basalts. The Juan de Fuca basaltic magmas were not in equilibrium with respect to carbon when they erupted and quenched on the sea floor. Evidence of disequilibrium includes (1) a large range of carbon contents among glasses collected at similar depths, (2) a highly variable calculated carbon isotopic fractionation between melt and vapor determined by comparing crushed and uncrushed splits of the same sample, and (3) a lack of correlation between vesicle abundance, carbon concentration, and depth of eruption. Variations in carbon concentration and delta 13C ratios along the ridge do not correlate with major element chemistry. The observed relationship between carbon concentrations and delta 13C values may be explained by late-stage, variable degrees of open-system (Rayleigh-like) degassing.     

Deep-sea smokers: windows to a subsurface biosphere?

Since the discovery of hyperthermophilic microbial activity in hydrothermal fluids recovered from "smoker" vents on the East Pacific Rise, the widely accepted upper temperature limit for life (based on pure culture data) has risen from below the boiling point of water at atmospheric pressure to approximately 115 degrees C. Many microbiologists seem willing to speculate that the maximum may be closer to 150 degrees C. We have postulated not only higher temperatures than these (under deep-sea hydrostatic pressures), but also the existence of a biosphere subsurface to accessible seafloor vents. New geochemical information from the Endeavour Segment of the Juan de Fuca Ridge indicative of subsurface organic material caused us to re-examine both the literature on hyperthermophilic microorganisms cultured from deep-sea smoker environments and recent results of microbial sampling efforts at actively discharging smokers on the Endeavour Segment. Here we offer the case for a subsurface biosphere based on an interdisciplinary view of microbial and geochemical analyses of Endeavour smoker fluids, a case in keeping with rapidly evolving geophysical understanding of organic stability under deep-sea hydrothermal conditions.     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.