Geoenvironmental site investigation using different techniques in a municipal solid waste disposal site in Brazil

Different geoenvironmental site investigation techniques to assess contamination from a municipal solid waste disposal site in Brazil are presented here. Superficial geophysical investigation (geoelectrical survey), resistivity piezocone penetration tests (RCPTU), soil samples collected with direct-push samplers and water samples collected from monitoring wells were applied in this study. The application of the geoelectrical method was indispensable to identify the presence and flow direction of contamination plumes (leachate) as well as to indicate the most suitable locations for RCPTU tests and soil and water sampling. Chemical analyses of groundwater samples contributed to a better understanding of the flow of the contaminated plume. The piezocone presented some limitations for tropical soils, since the groundwater level is sometimes deeper than the layer which is impenetrable to the cone, and the soil genesis and unsaturated conditions affect soil behavior. The combined interpretation of geoelectrical measurements and soil and water samplings underpinned the interpretation of RCPTU tests. The interpretation of all the test results indicates that the contamination plume has already overreached the landfill’s west-northwest borders. Geoenvironmental laboratory test results suggest that contamination from the solid waste disposal site has been developing gradually, indicating the need for continuous monitoring of the groundwater.     

Occurrence and spatial distribution of metals in intertidal sediments of a temperate estuarine system (Bahía Blanca,Argentina)

Intertidal sediments of the inner and middle zone from the Bahía Blanca estuary were sampled for geochemical and environmental assessment of metals (Cd, Cu, Pb, Zn, Mn, Ni, Cr and Fe). Results indicate that both the organic matter content and the sediment grain size plays an important role in controlling the differential concentrations of the metals found in sediments from both zones. For most of the elements (except Mn), sediment metal concentrations were greater in the middle zone, although the concentrations did not exceed the maximums for quality of marine sediments. In this sense, anthropogenic impact (i.e., sewage drain) appears to be a key factor in the distribution of metals within the estuarine system. Comparing the levels obtained with quality levels (LEL and SEL), except Cu that showed levels slightly above the LEL, the rest of the concentrations of metals were lower to those levels. The low metal concentrations obtained within this highly impacted estuarine system suggest that the great volume of water that flooding the extensive flats in each tidal cycle has much importance. Although the potential risks of metals to the estuarine environment were low, taking into account the toxicity of some of these metals, continuity of monitoring is highly recommended.     

Tokur gold ore–placer cluster in Amur Province: Geological–structural features and perspective of its development

The geological–structural features and gold-potential perspective of the Tokur ore–placer cluster in the Amur Province have been studied. This ore–placer cluster is a syncline composed of Paleozoic blackshale sequence, which is cut through by Late Paleozoic and Late Mesozoic intrusions. A granitoid massif is suggested at the depth on the basis of geophysical data. The cluster is distinguished by high productivity. Approximately 37 t gold from ore deposits, primarily from the Tokur deposit, and 60 t from placers have been mined out. The Tokur deposit is compared with the Natalka and Degdekan deposits from the Yana–Kolyma Province. Perspectives of the cluster area for large gold–quartz deposits and technogenic gold placers have been estimated.     

Assessment of flood inundation mapping of Surat city by coupled 1D/2D hydrodynamic modeling: a case application of the new HEC-RAS 5

Surat city of India, situated 100 km downstream of Ukai Dam and 19.4 km upstream from the mouth of River Tapi, has experienced the largest flood in 2006. The peak discharge of about 25,770 m³ s^?1 released from the Ukai Dam was responsible for a disaster. To assess the flood and find inundation in low-lying areas, simulation work is carried out under the 1D/2D couple hydrodynamic modeling. Two hundred ninety-nine cross sections, two hydraulic structures and five major bridges across the river are considered for 1D modeling, whereas a topographic map at 0.5 m contour interval was used to produce a 5 m grid, and SRTM (30 and 90 m) grid has been considered for Surat and the Lower Tapi Basin. The tidal level at the river mouth and the release from the Ukai Dam during 2006 flood are considered as the downstream and upstream boundaries, respectively. The model is simulated under the unsteady flow condition and validated for the year 2006. The simulated result shows that 9th August was the worst day in terms of flooding for Surat city and a maximum 75–77% area was under inundation. Out of seven zones, the west zone had the deepest flood and inundated under 4–5 m. Furthermore, inundation is simulated under the bank protection work (i.e., levees, retaining wall) constructed after the 2006 flood. The simulated results show that the major zones are safe against the inundation under 14,430 m³ s^?1 water releases from Ukai Dam except for the west zone. The study shows the 2D capability of new HEC-RAS 5 for flood inundation mapping and management studies.     

Impact of mining activities on sediments in a semi-arid environment: San Pedro River, Sonora, Mexico

A study of the San Pedro River (SPR), which is located in a semi-arid region in Sonora, Mexico, was conducted to evaluate the chemical, spatial and temporal (mobilization) trends of potentially harmful metals in its sediment in the rainy and dry seasons. High total concentrations of metals were detected in the following order: Fe > Cu > Mn > Zn > Pb > Cd. All studied metals except for Pb were increased during the dry season showing the effect of climate on the metal distribution in sediments. The results of sequential extraction indicated that the residual and Fe/Mn oxide fractions were the most important with regard to retaining potentially harmful metals in the sediments. In the exchangeable carbonate and Fe oxide fractions, high concentrations of metals were detected, representing high environmental risk. The geoaccumulation index shows slight to moderate contamination in most samples, and sampling point E4 (related to cattle activity) shows strong contamination for Cd, Cu, Pb and Zn. Enrichment factors (EFs) demonstrate anthropogenic origins for Pb (EF: 3–57), Cd (EF: 6–73) and Cu (EF: 1.5–224). This study shows that sediments are impacted by anthropogenic activities related to the mining industry, untreated wastewater discharges from the city of Cananea and cattle activities. Metal mobility in the SPR can disrupt the development of aquatic species in the river.     

4: Transpressional tectonics, lower crust decoupling and intrusion of deep mafic sills: A model for the unusual metallogenesis of SW Iberia

SW Iberia is interpreted as an accretionary magmatic belt resulting from the collision between the South Portuguese Zone and the autochthonous Iberian terrane in Variscan times (350 to 330 Ma). In the South Portuguese Zone, pull-apart basins were filled with a thick sequence of siliciclastic sediments and bimodal volcanic rocks that host the giant massive sulphides of the Iberian Pyrite Belt. Massive sulphides precipitated in highly efficient geochemical traps where metal-rich but sulphur-depleted fluids of dominant basinal derivation mixed with sulphide-rich modified seawater. Massive sulphides formed either in porous/reactive volcanic rocks by sub-seafloor replacement, or in dark shale by replacement of mud or by exhalation within confined basins with high biogenic activity. Crustal thinning and magma intrusion were responsible for thermal maturation and dehydration of sedimentary rocks, while magmatic fluids probably had a minor influence on the observed geochemical signatures.The Ossa Morena Zone was a coeval calc-alkaline magmatic arc. It was the site for unusual mineralization, particularly magmatic Ni–(Cu) and hydrothermal Fe-oxide–Cu–Au ores (IOCG). Most magmatism and mineralization took place at local extensional zones along first-order strike-slip faults and thrusts. The source of magmas and IOCG and Ni–(Cu) deposits probably lay in a large mafic–ultramafic layered complex intruded along a detachment at the boundary between the upper and lower crust. Here, juvenile melts extensively interacted with low-grade metamorphic rocks, inducing widespread anatexis, magma contamination and further exsolution of hydrothermal fluids. Hypersaline fluids (δ¹⁸O_fluid > 5.4‰ to 12‰) were focused upward into thrusts and faults, leading to early magnetite mineralization associated with a high-temperature (> 500 °C) albite–actinolite–salite alteration and subsequent copper–gold-bearing vein mineralization at somewhat lower temperatures. Assimilation of sediments by magmas led in turn to the formation of immiscible sulphide and silicate melts that accumulated in the footwall of the layered igneous complex. Further injection of both basic and sulphide-rich magmas into the upper crust led to the formation of Ni–(Cu)-rich breccia pipes.Younger (330 to 280 Ma?) peraluminous granitoids probably reflect the slow ascent of relatively dry and viscous magmas formed by contact anatexis. These granitoids have W–(Sn)- and Pb–Zn-related mineralization that also shows geochemical evidence of major mantle–crust interaction. Late epithermal Hg–(Cu–Sb) and Pb–Zn–(Ag) mineralization was driven by convective hydrothermal cells resulting from the high geothermal gradients that were set up in the zone by intrusion of the layered igneous complex. In all cases, most of the sulphur seems to have been derived from leaching of the host sedimentary rocks (δ³⁴S = 7‰ to 20‰) with only limited mixing with sulphur of magmatic derivation.The metallogenic characteristics of the two terranes are quite different. In the Ossa Morena Zone, juvenile magmatism played a major role as the source of metals, and controlled the styles of mineralization. In the South Portuguese Zone, magmas only acted as heat sources but seem to have had no major influence as sources of metals and fluids, which are dominated by crustal signatures. Most of the magmatic and tectonic features related to the Variscan subduction and collision seem to be masked by those resulting from transpressional deformation and deep mafic intrusion, which led to the development of a metallogenic belt with little resemblance to other accretionary magmatic arcs.     

Organic and inorganic geochemistry of Ljubija siderite deposits,NW Bosnia and Herzegovina

The Ljubija siderite deposits, hosted by a Carboniferous sedimentary complex within the Inner Dinarides, occur as stratabound replacement-type ore bodies in limestone blocks and as siderite–sulfides veins in shale. Three principal types of ore textures have been recognized including massive dark siderite and ankerite, siderite with zebra texture, and siderite veins. The ore and host rocks have been investigated by a combination of inorganic (major, trace, and rare earth element concentrations), organic (characterization of hydrocarbons including biomarkers), and stable isotope geochemical methods (isotope ratios of carbonates, sulfides, sulfates, kerogen, and individual hydrocarbons). New results indicate a marine origin of the host carbonates and a hydrothermal–metasomatic origin of the Fe mineralization. The differences in ore textures (e.g., massive siderite, zebra siderite) are attributed to physicochemical variations (e.g., changes in acidity, temperature, and/or salinity) of the mineralizing fluids and to the succession and intensity of replacement of host limestone. Vein siderite was formed by precipitation from hydrothermal fluids in the late stage of mineralization. The equilibrium fractionation of stable isotopes reveals higher formation temperatures for zebra siderites (around 245°C) then for siderite vein (around 185°C). Sulfur isotope ratios suggest Permian seawater or Permian evaporites as the main sulfur source. Fluid inclusion composition confirms a contribution of the Permian seawater to the mineralizing fluids and accord with a Permian mineralization age. Organic geochemistry data reflect mixing of hydrocarbons at the ore site and support the hydrothermal–metasomatic origin of the Ljubija iron deposits.     

Treatment of Acid Mine Drainage (AMD) in South Brazil: Comparative active processes and water reuse

This work describes AMD techniques of neutralization, with lime, flocculation of the precipitates and comparative flocs/liquid separation by flotation with microbubbles or by lamellar settling (LS). The AMD treated water was characterized by its quality for recycling in terms of inorganic or organic elements, suspended or dissolved solids, among others. Two types of flocs were formed, “aerated” or not, in a special flocculation reactor, patented by this research group (RGF^®). Aerated flocs formed (within seconds) entered into contact with microbubbles under high shearing and raised-up at rates > 120 mh^− 1 allowing a rapid solid–liquid separation by flotation (HR-high rate), at about 13–15 m³m^− 2 h^− 1 loading capacity. Conversely, the non-aerated flocs settled at about 5–6 m h^− 1 in a lamella settler. Both AMD treatment techniques showed similar efficiencies (removal of ions > 90%) but the separation by lamella settling presented advantages, namely less reagents (no flotation collector required), lower power requirements and easier to operate. The operating costs (approximate values) of the AMD treatment by LS at pH 9 reaches about 0.3 US$ m^− 3 against 0.6 US$ m^− 3 for the HR-flotation process. Results found were proved to be similar to those found in recent ADM treatment installations in South Brazil. The quality of the treated water is fairly good, nearly free of heavy metals ion, low BOD (biological oxygen demand) and TOC (total organic content), low solids content and may be readily reused for irrigation, industrial processes and as wash water (among others, streets, vehicles, dust control). However, there is a need to extend the use of this treated water resource, but this, at least in Brazil, has not been legislated properly. It is concluded that this research will contribute in the discussion of this old and complex problem in acid mining effluents worldwide.     

Determination of heterogeneities in the hydraulic properties of a phreatic aquifer from tidal level fluctuations: a case in Argentina

A well-known analytical solution of Jacob (1950) for groundwater flow due to tidal-wave propagation, together with field measurements along a complete tidal cycle and geological data, were used to evaluate the heterogeneities in the hydraulic properties of a phreatic aquifer located next to the River Ajo in the coastal plain environment of the southern sector of the Samborombon Bay wetland, Argentina. From the analysis of water-table fluctuations in a set of monitoring wells located along a riverbank-normal transect, it was possible to quantify the piecewise spatial variations of the hydraulic diffusivity of the phreatic aquifer. The results show the strong lateral variations of the sedimentary environment due to the influence of the different transport and deposition agents that characterize the coastal plain. The known thickness of the phreatic aquifer and the estimated range of the specific yield allowed the hydraulic conductivity to be identified as the most influential factor. [Jacob CE (1950) Flow of ground water. In: Rouse H (ed) Engineering Hydraulics. Wiley, New York]