Canelles landslide: modelling rapid drawdown and fast potential sliding

A large landslide (40 × 10⁶ m³) was reactivated on the left bank of Canelles reservoir, Spain. The instability was made evident after a considerable reduction of the reservoir level. The drawdown took place during the summer of 2006 after several years of high water levels. The drawdown velocity reached values between 0.5 and 1.2 m/day (registered at low elevations). The paper reports the geological and geotechnical investigations performed to define the movement. The geometry of the slip surface was established from the detailed analysis of the continuous cores recovered in deep borings and from limited information provided by inclinometers. Deep piezometric records provided also valuable information on the pore water pressure in the vicinity of the failure surface. These data allowed validating a flow–deformation coupled calculation model, which takes into account the changes in water level that occurred 4  years previous to the failure as well as the average rainfall. The analysis indicates that the most likely reason for the instability is the rapid drawdown that took place during the summer of 2006. The potential sudden acceleration of the slide is also analysed in the paper introducing coupled thermal hydraulic and mechanical effects that may develop at the basal shearing surface of the sliding mass. The results indicate that the slide velocity may reach values around 16 m/s when displacement reaches 250 m.     

Hydrogeological characterization of Gold Valley: an investigation of precipitation recharge in an intermountain basin in the Death Valley region, California, USA

Gold Valley is typical of intermountain basins in Death Valley National Park (DVNP), California (USA). Using water-balance calculations, a GIS-based analytical model has been developed to estimate precipitational infiltration rates from catchment-scale topographic data (elevation and slope). The calculations indicate that groundwater recharge mainly takes place at high elevations (>1,100?m) during winter (average 1.78?mm/yr). A resistivity survey suggests that groundwater accumulates in upstream compartmentalized reservoirs and that the groundwater flows through basin fill and fractured bedrock. This explains the relationship between the upstream precipitational infiltration in Gold Valley and the downstream spring flow in Willow Creek. To verify the ability of local recharge to support high-flux springs in DVNP, a GIS-based model was also applied to the Furnace Creek catchment. The results produced insufficient total volume of precipitational infiltration to support flow from the main high-flux springs in DVNP under current climatic conditions. This study introduces a GIS-based infiltration model that can be integrated into the Death Valley regional groundwater flow model to estimate precipitational infiltration recharge. In addition, the GIS-based model can efficiently estimate local precipitational infiltration in similar intermountain basins in arid regions provided that the validity of the model is verified.     

Study of bond stress–slip relationship and radial dilation in prestressed concrete

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.     

Depositional processes on oceanic island shelves – Evidence from storm‐generated Neogene deposits from the mid‐North Atlantic

Oceanic islands – such as the Azores in the mid‐North Atlantic – are periodically exposed to large storms that often remobilize and transport marine sediments along coastlines, and into deeper environments. Such disruptive events create deposits – denominated tempestites – whose characteristics reflect the highly dynamic environment in which they were formed. Tempestites from oceanic islands, however, are seldom described in the literature and little is known about storm‐related sediment dynamics affecting oceanic island shelves. Therefore, the geological record of tempestite deposits at oceanic islands can provide invaluable information on the processes of sediment remobilization, transport and deposition taking place on insular shelves during and after major storms. In Santa Maria Island (Azores), a sequence of Neogene tempestite deposits was incorporated in the island edifice by the ongoing volcanic activity (thus preserved) and later exposed through uplift and erosion. Because it was overlain by a contemporary coastal lava delta, the water depth at the time of deposition could be inferred, constituting an excellent case‐study to gain insight on the still enigmatic processes of insular shelf deposition. Sedimentological, palaeontological, petrographic and palaeo‐water depth information allowed the reconstruction of the depositional environment of these sediments. The sequence typifies the characteristics of a tempestite (or successive tempestites) formed at ca 50 m depth, in a steep, energetic open insular shelf, and with evidence for massive sediment remobilization from the nearshore to the middle or outer shelf. The authors claim that cross‐shelf transport induced by storm events is the main process of sediment deposition acting on steep and narrow shelves subjected to high‐energetic environments, such as the insular shelves of open‐sea volcanic islands.     

The Juchatengo complex: an upper-level ophiolite assemblage of late Paleozoic age in Oaxaca,southern Mexico

International Journal of Earth Sciences - The Juchatengo complex (JC) suite is located between the Proterozoic Oaxacan complex to the north and the Xolapa complex to the south, and was amalgamated...     

Gravimetric and magnetic fabric study of the Sintra Igneous complex: laccolith-plug emplacement in the Western Iberian passive margin

International Journal of Earth Sciences - The geometry and emplacement of the ~ 96 km2, Late Cretaceous Sintra Igneous complex (SIC, ca. 80 Ma) into the West Iberian passive...     

Prediction of ground displacements and velocities from groundwater level changes at the Vallcebre landslide (Eastern Pyrenees, Spain)

In active landslides, the prediction of acceleration of movement is a crucial issue for the design and performance of warning systems. The landslide of Vallcebre in the Eastern Pyreenes, Spain, has been monitored since 1996 and data on rainfall, groundwater levels and ground displacements are measured on a regular basis. Displacements observed in borehole wire extensometers have shown an immediate response of the landslide to rainfall episodes. This rapid response is likely due to the presence of preferential drainage ways. The occurrence of nearly constant rates of displacement in coincidence with steady groundwater levels suggests the presence of viscous forces developed during the movement. An attempt to predict both landslide displacements and velocities was performed at Vallcebre by solving the momentum equation in which a viscous term (Bingham and power law) was added. Results show that, using similar rheological parameters for the entire landslide, computed displacements reproduce quite accurately the displacements observed at three selected wire extensometers. These results indicate that prediction of displacements from groundwater level changes is feasible.     

8000 years of vegetation history in the northern Iberian Peninsula inferred from the palaeoenvironmental study of the Zalama ombrotrophic bog (Basque‐Cantabrian Mountains,Spain)

This paper focuses on pollen, spores, non‐pollen palynomorphs (NPPs) and certain geochemical elements from the ombrotrophic blanket bog of Zalama (Basque‐Cantabrian Mountains, northern Iberian Peninsula), with the support of a robust chronology based on 17 AMS ¹⁴C dates. The main results related to the last 8000 years show that, during the early middle Holocene, pines and deciduous forests were the most extensive tree formations. At the beginning of the succession, pines reach 44%, showing regional presence, whereas after 7600 cal. a BP, deciduous forests were particularly abundant. From c. 6500 cal. a BP the pollen diagram constructed from our samples shows the first anthropogenic evidence, linked with the new economic practices related to the Neolithic of the Basque‐Cantabrian Mountains. From 3300 cal. a BP the expansion of Fagus sylvatica is particularly clear, and has since then become one of the dominant forest species in this region. We also discuss the Holocene evolution of other noteworthy plant communities in southwestern Europe, such as Taxus baccata, Juglans and shrublands.     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

Comment on “An extended STIRPAT model-based methodology for evaluating the driving forces affecting carbon emissions in existing public building sector: evidence from China in 2000–2015” by Ma et al. (2017)

Natural Hazards - This contribution highlights that the paper presented by Ma et al. (Nat Hazards 89(2):741–756, 2017) presents VIF lower than 1 which does not coincide with the natural...