Performance of masonry enclosure walls: lessons learned from recent earthquakes

This paper discusses the issue of performance requirements and construction criteria for masonry enclosure and infill walls.Vertical building enclosures in European countries are very often constituted by non-load-bearing masonry walls, using horizontally perforated clay bricks.These walls are generally supported and confined by a reinforced concrete frame structure of columns and beams/slabs.Since these walls are commonly considered to be nonstructural elements and their influence on the structural response is ignored,their consideration in the design of structures as well as their connection to the adjacent structural elements is frequently negligent or insufficiently detailed.As a consequence,nonstructural elements,as for wall enclosures,are relatively sensitive to drift and acceleration demands when buildings are subjected to seismic actions. Many international standards and technical documents stress the need for design acceptability criteria for nonstructural elements,however they do not specifically indicate how to prevent collapse and severe cracking,and how to enhance the overall stability in the case of moderate to high seismic loading.Furthermore,a review of appropriate measures to improve enclosure wall performance and both in-plane and out-of-plane integrity under seismic actions is addressed.     

Assessment of the effects of a marine urban outfall discharge on caged mussels using chemical and biomarker analysis

To assess the presence of endocrine disruptors in treated marine outfall discharges and their possible effects, mussels (Mytilus galloprovincialis) were caged in the environmental mixing zone of the outfall of the Santander sanitation system and in one control area. After 30, 60 and 90 days, samples were collected to perform chemical analyses (metals, anionic surfactants, alkylphenols, bisphenol A, phthalates and estrogenic hormones), biomarkers of general stress (lysosomal membrane stability-LMS, histopathology) and biomarkers of endocrine disruption (vitellogenin-like proteins and gonad index). There were no significant differences between outfall and control sites on contaminant levels, except for 4-tert-octylphenol which was higher in the outfall site. Bacteriological counts were higher in the outfall area. No relevant differences in biomarkers were detected between treated and control mussels. A significant reduction in LMS occurred in both groups after 90 days caging, indicating a stress situation possibly related to caging or to post-spawning reproductive state.     

Analytic element modelling for strip aquifers

The Analytic Element Method (AEM) provides a convenient tool for groundwater flow analysis in unbounded continuous domains. The AEM is based on the superposition of analytic functions, known as elements, useful at both regional and local scales. In this study, analytic elements for strip aquifers are presented. Such aquifers occur in riverine or coastal deposits and in outcrop zones of confined aquifers. Local flow field is modelled indirectly, using a reference plane related to the aquifer domain through the Schwarz‐Christoffel transform. The regional flow is obtained as a solution of the one‐dimensional flow equation. The proposed methodology was tested by modelling two hypothetical situations, which were compared to exact solutions. It is shown that regional boundaries can be reproduced exactly while local fields are adequately reproduced with analytic elements. The developed elements are applied to simulate a real flow field in northeastern Brazil showing good agreement with measured water levels. Copyright © 2011 John Wiley & Sons, Ltd.     

A Comprehensive Method for Fractionating Soil Organic Matter Not Protected and Protected from Decomposition by Physical and Chemical Mechanisms

The objective of this work was to describe a method for isolating meaningful and measurable soil organic matter (SOM) pools that differ in the mechanisms by which they are protected from decomposition. The proposed method is appropriate for soil C stabilization and sequestration studies. Unlike previous fractionation schemes, this procedure allows free SOM located between aggregates (unprotected C pool) and SOM occluded within both macroaggregates and microaggregates (C weakly and strongly protected by physical mechanisms, respectively) to be recovered separately, freed from the soil mineral matrix and the mineral‐associated SOM pool (C pool protected by chemical mechanisms) and thus well suited to advanced chemical characterization by ¹³C‐NMR. Briefly, free SOM is isolated by an initial density separation. Stable macroaggregates are broken up into stable microaggregates and intra‐macroaggregate SOM, which is then separated by density. Finally, intra‐microaggregate SOM is isolated from mineral‐associated SOM by a third density separation after ultrasonic disruption. The SOM dissolved during the fractionation procedure is also recovered. Results obtained on soil samples with contrasting textures suggested that clay content induces a decrease of the proportion of free organic C and an increase of mineral‐associated organic C content. Free SOM is characterized by a marked presence of undecayed organic material and biologically labile substances, such as carbohydrates and proteins. In contrast, SOM occluded within aggregates, especially within microaggregates, represents a more decomposed fraction, relatively enriched in unsubstituted‐aliphatic material, most probably lipid biopolymers.     

Sediments Quality Assessment of Jacarepaguá Lagoon: The Venue of the 2011 Rock in Rio

In order to aid in the efforts of the 2016 Olympic Games, the organizers of 2011 Rock in Rio decided to build a permanent venue next to the Olympic Park. The area is problematic from the geotechnical point of view since it presents soils with low shear strength, low permeability, and high plasticity, so major soil improvement works were carried out. Bored soil–cement columns were placed to increase soil shear strength and reduce compressibility. A meter thick fill composed of gneiss residual soil was placed and trenches were digged to drain rainwater. However, earlier studies conducted on Jacarepaguá Lagoon have detected the presence of heavy metals in these sediments. In this study, an environmental survey on the Jacarepaguá Lagoon sediments took place in order to choose a place where its sediments could be dredged to be later used in the drainage facilities. The results indicated areas where the threshold level 1 (low probability of adverse effects) issued by the general procedures for sediments quality assessments for dredging purposes, Resolution no 344 of the Brazilian Federal Government, was surpassed. Levels above the limits established for cadmium (Cd), lead (Pb), copper (Cu), nickel (Ni), and zinc (Zn) were detected. Based on this consideration the State Environmental Agency issued a permit allowing the organizers of 2011 Rock in Rio to dredge an area close to City of Rock in order to obtain coarse sediments for the drainage facilities. In addition, it was found that those sediments were ideal for this application since their hydraulic conductivity is on the order of 10^?2 cm/s.     

Characterisation and multifaceted anisotropy assessment of Corvio sandstone for geological CO2 storage studies

We present a comprehensive characterisation of the physical, mineralogical, geomechanical, geophysical, and hydrodynamic properties of Corvio sandstone. This information, together with a detailed assessment of anisotropy, is needed to establish Corvio sandstone as a useful laboratory rock‐testing standard for well‐constrained studies of thermo–hydro–mechanical–chemical coupled phenomena associated with CO₂ storage practices and for geological reservoir studies in general. More than 200 core plugs of Corvio sandstone (38.1 and 50 mm diameters, 2:1 length‐to‐diameter ratio) were used in this characterisation study, with a rock porosity of 21.7 ± 1.2%, dry density 2036 ± 32 kg m^?3, and unconfined compressive and tensile strengths of 41 ± 3.28 and 2.3 ± 0.14 MPa, respectively. Geomechanical tests show that the rock behaves elastically between ～10 and ～18 MPa under unconfined conditions with associated Young's modulus and Poisson's ratio of 11.8 ± 2.8 GPa and 0.34 ± 0.01 GPa, respectively. Permeability abruptly decreases with confining pressure up to ～10 MPa and then stabilises at ～1 mD. Ultrasonic P‐ and S‐wave velocities vary from about 2.8–3.8 km s^?1 and 1.5–2.4 km s^?1, respectively, over confining and differential pressures between 0.1 and 35 MPa, allowing derivation of associated dynamic elastic moduli. Anisotropy was investigated using oriented core plugs for electrical resistivity, elastic wave velocity and attenuation, permeability, and tracer injection tests. Corvio sandstone shows weak transverse isotropy (symmetry axis normal to bedding) of <10% for velocity and <20% for attenuation.     

On the Use of Random Material in Dam Cores: Case of the Manso Dam,Brazil

Geotechnical and Geological Engineering - The Manso Dam, in the Brazilian State of Mato Grosso, intended for flood control and electricity generation, was built by a state-owned energy company in...     

Technical, financial and location criteria for the design of land application system treatment

Conventional water treatments when downsized to cover the demands of small and scattered populations are costly and ineffective. In fact, many small towns cannot afford the high average treatment costs nor provide the skill and complex management requirements. Even when these facilities are available, waste water might not be properly treated. Land application system treatments (LAST) have been shown to be preferable on the basis of their technical effectiveness and financial viability. The recently approved Spanish regulations (RDL 1620/2007, pp 50369–50661) represent an opportunity for the implementation of well-designed LASTs. This paper presents an assessment methodology for the design of LASTs by combining technical, financial and location criteria. The method is applied to the design of LASTs to cover the water disposal demand of twelve municipalities located within the protected natural landscape, and surrounding areas of ‘El Rebollar’, Salamanca, Spain.