Geochronology of West Indonesia and its implication on plate tectonics

The results of radiometric dating of granitic rocks around Kotanopan near the west coast of Central Sumatra indicate an average age of 45 million years.Granites from the Lassi Mass in the Padang Highlands, Central Sumatra, and the Lampong Mass, South Sumatra, possess radiometric ages of ca. 112 and ca. 88 m.y., respectively. Granites and other rocks from the offshore areas north of Java indicate an average age of 100 m.y.Late Cretaceous granitic rocks are present in the islands of the Sunda Shelf namely Anambas (ca. 86 m.y.), Tembelan (ca. 85 m.y.) and Natuna (ca. 75 m.y.).Late Paleozoic granites possessing ages of ca. 276–298 m.y. are encountered in the basement rocks near Djambi, South Sumatra.The outcome of this radiometric age dating proves to be significant for it permits a fresh analysis of the geological evolution of Indonesia based on the plate-tectonics concept.The Tertiary volcano-plutonic arc exposed along the west coast of Sumatra can be traced to the south coast of Java. The corresponding subduction zone can be found in the islands west of Sumatra and the submarine ridge south of Java.The Late Cretaceous plutonic belt of Sumatra does not continue to Java but passes north of it, running however parallel to the subduction zone of Java. These two zones merge in the Meratus Mountains of Southeast Kalimantan.Sumatra was already a volcano-plutonic arc during Permian time, suggesting that since this Period the margins of at least four lithospheric plates have remained near the side of the active Sumatran arc.The presence of Permian volcanic and granitic rocks in the Malay Peninsula and West Kalimantan, and the results of the radiometric age determination of granitic rocks from the islands situated in the Sunda Shelf area, point to the existence of other Permian and Cretaceous volcano-plutonic arcs east and north of the arcs previously described in Sumatra and Java. Thus a double volcano-plutonic arc with opposing Benioff zones must have existed during Permian and Cretaceous time in this area.The Schwaner Mountains of West Kalimantan are considered to be the place where volcano-plutonic arcs of different ages have merged together. The correlative subduction zones have to be sought in the so-called Danau Formation of West Kalimantan and the northern part of the Kuching zone, the Sibu zone of Serawak situated north of the Schwaner Mountains.The evolution and complex geology of the western part of Indonesia can only be understood by the supposition of the existence of megaplates and sub-plates generated from spreading centers situated in the Indian Ocean and presumably in the area of the South China Sea, respectively.     

Petrography and geochemistry of clastic sedimentary rocks as evidences for provenance of the Lower Cambrian Lalun Formation, Posht-e-badam block, Central Iran

Petrography and geochemistry (major, trace and rare earth elements) of clastic rocks from the Lower Cambrian Lalun Formation, in the Posht-e-badam block, Central Iran, have been investigated to understand their provenance. Petrographical analysis suggests that the Lalun conglomerates are dominantly with chert clasts derived from a proximal source, probably chert bearing Precambrian Formations. Similarly, purple sandstones are classified as litharenite (chertarenite) and white sandstones as quartzarenite types. The detrital modes of purple and white sandstones indicate that they were derived from recycled orogen (uplifted shoulders of rift) and stable cratonic source. Most major and trace element contents of purple sandstones are generally similar to upper continental crust (UCC) values. However, white sandstones are depleted in major and trace elements (except SiO₂, Zr and Co) relative to UCC, which is mainly due to the presence of quartz and absence of other Al-bearing minerals. Shale samples have considerably lower content in most of the major and trace elements concentration than purple sandstones, which is possibly due to intense weathering and recycling. Modal composition (e.g., quartz, feldspar, lithic fragments) and geochemical indices (Th/Sc, La/Sc, Co/Th, Cr/Th, Cr/V and V/Ni ratios) of sandstones, and shales (La/Sc and La/Cr ratios) indicate that they were derived from felsic source rocks and deposited in a passive continental margin. The chondrite-normalized rare earth element (REE) patterns of the studied samples are characterized by LREE enrichment, negative Eu anomaly and flat HREE similar to an old upper continental crust composed chiefly of felsic components in the source area. The study of paleoweathering conditions based on modal composition, chemical index of alteration (CIA), plagioclase index of alteration (PIA) and A–CN–K (Al₂O₃ − CaO + Na₂O − K₂O) relationships indicate that probably chemical weathering in the source area and recycling processes have been more important in shale and white sandstones relative to purple sandstones. The results of this study suggest that the main source for the Lalun Formation was likely located in uplifted shoulders of a rifted basin (probably a pull-apart basin) in its post-rift stage (Pan-African basement of the Posht-e-badam block).     

Practical kinetic modeling of petroleum generation and expulsion

Models for petroleum generation used by the industry are often limited by (a) sub-optimal laboratory pyrolysis methods for studying hydrocarbon generation, (b) over-simple models of petroleum generation, (c) inappropriate mathematical methods to derive kinetic parameters by fitting laboratory data, (d) primitive models of primary migration/expulsion and its coupling with petroleum generation, and (e) insufficient use of subsurface data to constrain the models. Problems (a), (b) and (c) lead to forced compensation effects between the activation energies and frequency factors of reaction kinetics that are wholly artificial, and which yield poor extrapolations to geological conditions. Simple switch or adsorption models of expulsion are insufficient to describe the residence time of species in source rocks. Yet, the residence time controls the thermal stresses to which the species are subjected for cracking to lighter species.     

Hydrothermal plume mapping as a prospecting tool for seafloor sulfide deposits: a case study at the Zouyu-1 and Zouyu-2 hydrothermal fields in the southern Mid-Atlantic Ridge

Seafloor hydrothermal polymetallic sulfide deposits are a new type of resource, with great potential economic value and good prospect development. This paper discusses turbidity, oxidation–reduction potential, and temperature anomalies of hydrothermal plumes from the Zouyu-1 and Zouyu-2 hydrothermal fields on the southern Mid-Atlantic Ridge. We use the known location of these vent fields and plume data collected in multiple years (2009, 2011, 2013) to demonstrate how real-time plume exploration can be used to locate active vent fields, and thus associated sulfide deposits. Turbidity anomalies can be detected 10 s of km from an active source, but the location precision is no better than a few kilometers because fine-grained particles are quasi-conservative over periods of many days. Temperature and oxidation–reduction potential anomalies provide location precision of a few hundred meters. Temperature anomalies are generally weak and difficult to reliably detect, except by chance encounters of a buoyant plume. Oxidation–reduction potential is highly sensitive (nmol concentrations of reduced hydrothermal chemicals) to discharges of all temperatures and responds immediately to a plume encounter. Real-time surveys using continuous tows of turbidity and oxidation–reduction potential sensors offer the most efficient and precise surface ship exploration presently possible.     

Erosion rates and mechanisms of knickzone retreat inferred from 10Be measured across strong climate gradients on the northern and central Andes Western Escarpment

A steep escarpment edge, deep gorges and distinct knickzones in river profiles characterize the landscape on the Western Escarpment of the Andes between ~5°S and ~18°S (northern Peru to northern Chile). Strong north–south and east–west precipitation gradients are exploited in order to determine how climate affects denudation rates in three river basins spanning an otherwise relatively uniform geologic and geomorphologic setting. Late Miocene tectonics uplifted the Meseta/Altiplano plateau (~3000 m a.s.l.), which is underlain by a series of Tertiary volcanic‐volcanoclastic rocks. Streams on this plateau remain graded to the Late Miocene base level. Below the rim of the Meseta, streams have responded to this ramp uplift by incising deeply into fractured Mesozoic rocks via a series of steep, headward retreating knickzones that grade to the present‐day base level defined by the Pacific Ocean. It is found that the Tertiary units on the plateau function as cap‐rocks, which aid in the parallel retreat of the sharp escarpment edge and upper knickzone tips. ¹⁰Be‐derived catchment denudation rates of the Rio Piura (5°S), Rio Pisco (13°S) and Rio Lluta (18°S) average ~10 mm ky^?1 on the Meseta/Altiplano, irrespective of precipitation rates; whereas, downstream of the escarpment edge, denudation rates range from 10 mm ky^?1 to 250 mm ky^?1 and correlate positively with precipitation rates, but show no strong correlation with hillslope angles or channel steepness. These relationships are explained by the presence of a cap‐rock and climate‐driven fluvial incision that steepens hillslopes to near‐threshold conditions. Since escarpment retreat and the precipitation pattern were established at least in the Miocene, it is speculated that the present‐day distribution of morphology and denudation rates has probably remained largely unchanged during the past several millions of years as the knickzones have propagated headward into the plateau. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of CO2 on benthic biota: An in situ benthic chamber experiment in Storfjorden (Norway)

Carbon capture and storage (CCS) methods, either sub-seabed or in ocean depths, introduces risk of CO₂ leakage and subsequent interaction with the ecosystem. It is therefore important to obtain information on possible effects of CO₂. In situ CO₂ exposure experiments were carried out twice for 10 days during 2005 using a Benthic Chamber system at 400 m depth in Storfjorden, Norway. pCO₂ in the water above the sediment in the chambers was controlled at approximately 500, 5000 and 20,000 μatm, respectively. This article describes the experiment and the results from measured the biological responses within the chamber sediments. The results show effects of elevated CO₂ concentrations on biological processes such as increased nanobenthos density. Methane production and sulphate reduction was enhanced in the approximately 5000 μatm chamber.     

Embedding reach-scale fluvial dynamics within the CAESAR cellular automaton landscape evolution model

We introduce a new computational model designed to simulate and investigate reach-scale alluvial dynamics within a landscape evolution model. The model is based on the cellular automaton concept, whereby the continued iteration of a series of local process ‘rules’ governs the behaviour of the entire system. The model is a modified version of the CAESAR landscape evolution model, which applies a suite of physically based rules to simulate the entrainment, transport and deposition of sediments. The CAESAR model has been altered to improve the representation of hydraulic and geomorphic processes in an alluvial environment. In-channel and overbank flow, sediment entrainment and deposition, suspended load and bed load transport, lateral erosion and bank failure have all been represented as local cellular automaton rules. Although these rules are relatively simple and straightforward, their combined and repeatedly iterated effect is such that complex, non-linear geomorphological response can be simulated within the model. Examples of such larger-scale, emergent responses include channel incision and aggradation, terrace formation, channel migration and river meandering, formation of meander cutoffs, and transitions between braided and single-thread channel patterns. In the current study, the model is illustrated on a reach of the River Teifi, near Lampeter, Wales, UK.     

Hyperspectral mapping of alteration assemblages within a hydrothermal vug at the Haughton impact structure,Canada

Meteorite impacts on Earth and Mars can generate hydrothermal systems that alter the primary mineralogies of rocks and provide suitable environments for microbial colonization. We investigate a calcite–marcasite‐bearing vug at the ~23 km diameter Haughton impact structure, Devon Island, Nunavut, Canada, using imaging spectroscopy of the outcrop in the field (0.65–1.1 μm) and samples in the laboratory (0.4–2.5 μm), point spectroscopy (0.35–2.5 μm), major element chemistry, and X‐ray diffraction analyses. The mineral assemblages mapped at the outcrop include marcasite; marcasite with minor gypsum and jarosite; fibroferrite and copiapite with minor gypsum and melanterite; gypsum, Fe³⁺ oxides, and jarosite; and calcite, gypsum, clay, microcline, and quartz. Hyperspectral mapping of alteration phases shows spatial patterns that illuminate changes in alteration conditions and formation of specific mineral phases. Marcasite formed from the postimpact hydrothermal system under reducing conditions, while subsequent weathering oxidized the marcasite at low temperatures and water/rock ratios. The acidic fluids resulting from the oxidation collected on flat‐lying portions of the outcrop, precipitating fibroferrite + copiapite. That assemblage then likely dissolved, and the changing chemistry and pH resulting from interaction with the calcite‐rich host rock formed gypsum‐bearing red coatings. These results have implications for understanding water–rock interactions and habitabilities at this site and on Mars.     

Yucatán karst features and the size of Chicxulub crater

The buried Chicxulub impact structure is marked by a dramatic ring of sinkholes (called cenotes if containing water), and adjacent less prominent partial rings, which have been shown to coincide with maxima in horizontal gravity gradients and a topographic depression. These observations, along with the discreteness and spacing of the features, suggest a formation mechanism involving faulting in the outer slump zone of the crater, which would thus have a diameter of approximately 180 km.
An opposing view, based primarily on the interpretation of gravity data, is that (he crater is much larger than the cenote ring implies. Given the association of the known cenote ring with faults, we here examine northern Yucatan for similar rings in gravity, surface features and elevation, which we might expect to be associated with outer concentric faults in the case of a larger, possibly multiring, structure.
No such outer rings have been found, although definite patterns are seen in the distribution of karst features outside the crater rim. We explain these patterns as resulting mainly from deformation related to the block fault zone that parallels tbe shelf edge of eastern Yucatan.