The mass ratio of Nova Muscae 1991

We report intermediate resolution H spectroscopy of the black hole candidate Nova Muscae 1991 during quiescence. We classify the companion star as a K3-K4V which contributes 85±6 percent to the total flux from the binary. The photospheric absorption lines are broadened by 106±13 kms⁻¹ with respect to template field stars, leading to a system mass ratio of q =M₁/M₂ = 7.8_−2.0^+3.4. Doppler imaging of the H line shows strong emission coming from the secondary star (EW=3.1±0.6Å) which we associate with chromospheric activity. However, the hot-spot is not detected and this may indicate a lower mass transfer rate than in other X-ray transients of comparable orbital periods. The surface brightness distribution of the accretion disk in H follows a relation I∝R^−1.1, less steep than typically observed in cataclysmic variables. Updated system parameters are also presented.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

The role of collisions with interplanetary particles in the physical evolution of comets

Effects of collisions with interplanetary particles are investigated. To this purpose, collision probabilities for comets with different orbital elements are computed. It is found that collisions may have a non-negligible effect on the physical evolution of comets. In this connection, it is shown that under certain conditions collisional lifetimes may be shorter than dynamical or vaporization lifetimes. In particular, collisional lifetimes are on average shorter for comets in retrograde orbits than those for direct ones. It is further suggested that catastrophic collisions may contribute to prevent long-period comets in retrograde orbits from reaching short-period orbits by orbital diffusion. Collisions may also produce irregularities of the nucleus brightness by leaving exposed regions of fresh volatile material and may in this way lead to a rejuvenation of old dusty short-period comets. Catastrophic collision probabilities are too low to account for the observed comet splittings, so other trigger mechanisms should be at work. However, it is shown that collisional mini-bursts (increases in brightness of one magnitude or so) caused by decimeter-sized bodies may occur rather frequently on short-period comets when they pass through the asteroid belt. The burst observed in comet Tempel-2 at 3 AU in December, 1978 could be an example of such collisional mini-bursts. The systematic observation of periodic comets when they pass through the asteroid belt could give valuable information about the spatial density of decimeter and meter-sized bodies. In particular, collisional effects for comet Halley, for which a continuous surveillance is planned, are evaluated.     

Spatial and seasonal patterns of flood change across Brazil

Brazil has some of the largest rivers in the world and has the second greatest flood loss potential among the emergent countries. Despite that, flood studies in this area are still scarce. In this paper, we used flood seasonality and trend analysis at the annual and seasonal scales in order to describe flood regimes and changes across the whole of Brazil in the period 1976–2015. We identified a strong seasonality of floods and a well-defined spatio-temporal pattern for flood occurrence. There are positive trends in the frequency and magnitude of floods in the North, South and parts of Southeast Brazil; and negative trends in the North-east and the remainder of Southeast Brazil. Trends in the magnitude (frequency) were predominant in the winter (summer). Overall, floods are becoming more frequent and intense in Brazilian regions characterized by wet conditions, and less frequent and intense in drier regions.     

Flood‐based analysis of high‐magnitude sediment transport using a non‐parametric method

Upland erosion and the resulting reservoir siltation is a serious issue in the Isábena catchment (445 km² Central Spanish Pyrenees). During a three‐month period, water and sediment fluxes have been monitored at the catchment outlet (Capella), two adjacent subcatchments (Villacarli, 41 km²; Cabecera, 145 km²) and the elementary badland catchment Torrelaribera (8 ha). This paper presents the results of the monitoring, a method for the calculation of a sedigraph from intermittent measurements and the derived sediment yields at the monitored locations. The observed suspended sediment concentrations (SSCs) demonstrate the role of badlands as sediment sources: SSCs of up to 280 g l^?1 were encountered for Villacarli, which includes large badland areas. SSCs at the Cabecera catchment, with great areas of woodland, barely exceeded 30 g l^?1. SSCs directly at the sediment source (Torrelaribera) were comparable to those at Villacarli, suggesting a close connection within this subcatchment. At Capella, SSCs of up to 99 g l^?1 were observed. For all sites, SSC displayed only a loose correlation with discharge, inhibiting the application of a simple sediment rating curve. Instead, ancillary variables acting as driving forces or proxies for the processes (rainfall energy, cumulative discharge, rising/falling limb data) were included in a quantile regression forest model to explain the variability in SSC. The variables with most predictive power vary between the sites, suggesting the predominance of different processes. The subsequent flood‐based calculation of sediment yields attests high specific sediment yields for Torrelaribera and Villacarli (6277 and 1971 t km^?2) and medium to high yields for Cabecera and Capella (139 and 410 t km^?2) during the observation period. In all catchments, most of the sediment was exported during intense storms of late summer. Later flood events yield successively less sediment. Relating upland sediment production to yield at the outlet suggests considerable effects of sediment storage within the river channel. Copyright © 2008 John Wiley & Sons, Ltd.     

Ecological quality assessment of small estuaries from the Portuguese coast based on benthic macroinvertebrate assemblages indices

Benthic macroinvertebrates communities are the most consistently emphasized biotic component of aquatic ecosystems and are one of the biological indicators required for assessment by the European Water Framework Directive. In this context, several indices based on these communities have been developed in order to assess ecological quality of estuarine systems. In the present work we used AMBI, M-AMBI, BENTIX and BAT to distinguish ecological status of five small estuarine systems of the Portuguese south and southwest coasts. Although indices outputs did not differ between systems and sampling seasons, results indicated that the metrics in which these indices are based could differentiate community structures as a result of two main gradients that force these communities: the natural variability, and the anthropogenic impact.     

Can Brans-Dicke universes in five dimensions be interpreted as 4-dimensional general relativity cosmologies?

The 5-dimensional Jordan-Brans-Dicke cosmologies in vacuum are found for the Bianchi type I metric, their relation with general relativity cosmologies is studied. Two solutions are possible, both produce effective pressure and energy density in the 4-dimensional G.R.-universes. One is a power-law relation, with two cases, the first one is forp _eff=_eff and the other forp _eff=_eff(– 1 < < 1) has a behaviour as the open flat universe. The second solution is an exponential only valid forp _eff=–_eff. In all cases the three-space expansion reaches infinity ast and the fifth dimension can be made to decrease approaching zero. The scalar field can increase or decrease with time.     

An orthotropic interface damage model for simulating drying processes in soils

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.     

Effect of galvanic distortions on the series and parallel magnetotelluric impedances and comparison with other responses

The series and parallel impedances of the magnetotelluric tensor are appraised in relation to their relative immunity to galvanic electric distortions. The distorted responses are modeled using the Groom-Bailey decomposition of the tensor in terms of twist, shear, statics and strike direction. These four parameters and the undistorted responses are normally considered as unknowns, and are obtained from field data through the solution of an inverse problem. In the present work we use the decomposition as a forward model to simulate distorted sounding curves. Starting with undistorted 2-d te and tm responses, the tensor is distorted by assuming arbitrary values of twist, shear, static and strike direction. By default, both series and parallel responses are immune to the strike direction because they are invariants under rotation. In addition, series responses are immune to twist and shear and parallel responses only to twist. The dependence of the latter on shear is in the form of a real factor that shifts downwards the amplitude curves. On the other hand, the effect of statics on both series and parallel responses is more complicated than that on the impedance tensor because it cannot be accounted for by a simple shift of the curves. On the whole, there is a positive balance on the part of the series and parallel impedances over the te and tm responses because some of the distortions are filtered out by the invariants. It is shown that invariance is not sufficient to be immune to any of the distortions. The example chosen is Eggers’ eigenvalues, which are immune only to the by-the-fault strike direction. Invariance is not necessary either, as evidenced by the phase tensor, whose elements depend on strike but are immune to all distortions. The derivations are illustrated using soundings from the synthetic coprod2s1 and field-recorded coprod2 and bc87 data sets.