Determination of two‐dimensional laboratory‐scale dispersivities

A tracer test was conducted in a laboratory chamber representing a two‐dimensional aquifer to investigate the longitudinal dispersivity (α_L) and the ratio (α_T/α_L) of transverse to longitudinal dispersivity of sandy aquifer materials. Dispersive parameters were obtained by matching the observed chloride plumes at 9 hours and 16 hours after tracer injection with those simulated by a flow and transport model. The best match was found for α_L = 0·2 ? 0·25 cm and α_T/α_L = 0·2. The ratio of α_T/α_L = 0·2 was within the range of laboratory values reported in the literature. Sensitivity analysis revealed that the tracer plume concentration and shape were more sensitive to variations in longitudinal dispersivity than to the ratio of transverse to longitudinal dispersivity. This result contrasted with findings of others, showing that the dispersivity ratio greatly affects contaminant plume shape. However, our experimental boundary conditions restricted expansion of the plume normal to the direction of flow and thus affected the parameter estimation. Copyright © 2004 John Wiley & Sons, Ltd.     

Diurnal cycle of surface energy fluxes in high mountain terrain: High-resolution fully coupled atmosphere-hydrology modelling and impact of lateral flow

Water and energy fluxes are inextricably interlinked within the interface of the land surface and the atmosphere. In the regional earth system models, the lower boundary parameterization of land surface neglects lateral hydrological processes, which may inadequately depict the surface water and energy fluxes variations, thus affecting the simulated atmospheric system through land-atmosphere feedbacks. Therefore, the main objective of this study is to evaluate the hydrologically enhanced regional climate modelling in order to represent the diurnal cycle of surface energy fluxes in high spatial and temporal resolution. In this study, the Weather Research and Forecasting model (WRF) and coupled WRF Hydrological modelling system (WRF-Hydro) are applied in a high alpine catchment in Northeastern Tibetan Plateau, the headwater area of the Heihe River. By evaluating and intercomparing model results by both models, the role of lateral flow processes on the surface energy fluxes dynamics is investigated. The model evaluations suggest that both WRF and coupled WRF-Hydro reasonably represent the diurnal variations of the near-surface meteorological fields, surface energy fluxes and hourly partitioning of available energy. By incorporating additional lateral flow processes, the coupled WRF-Hydro simulates higher surface soil moisture over the mountainous area, resulting in increased latent heat flux and decreased sensible heat flux of around 20–50 W/m² in their diurnal peak values during summertime, although the net radiation and ground heat fluxes remain almost unchanged. The simulation results show that the diurnal cycle of surface energy fluxes follows the local terrain and vegetation features. This highlights the importance of consideration of lateral flow processes over areas with heterogeneous terrain and land surfaces.     

Pb isotopic ratios in airborne PM10 of an iron/metal industrial complex area and nearby residential areas: Implications for ambient sources of Pb pollution

This study examined four stable isotopic compositions of Pb in the PM₁₀ (²⁰⁴Pb, ²⁰⁶Pb, ²⁰⁷Pb and ²⁰⁸Pb) along with the ambient Pb concentrations in two residences relative to their proximity to an iron and metal industrial complex (IMIC) as well as an industrial site located within the boundary of the IMIC. In addition, eight potential emission sources were investigated for stable isotopic compositions of Pb. The wintertime Pb isotopic ratios for ²⁰⁸Pb/²⁰⁶Pb for ambient samples of an industrial sampling site (ISS) were closer to those of the residential ambient air concentrations measured at closer proximity to the IMIC (RA1) compared to another residential area located further away (RA2). This finding suggests that the ambient Pb sources were more similar between RA1 and the ISS than between RA2 and the ISS. In contrast, the summertime Pb isotopic ratios for the ambient samples of the ISS were not similar to those for RA1, which in turn were similar to those for RA2. During the summer, it is suggested that motor vehicle emissions appear to be a potential source of Pb in the two residential areas. For the ISS, neither ²⁰⁷Pb/²⁰⁶Pb nor ²⁰⁸Pb/²⁰⁶Pb ratios showed a clear seasonal pattern. However for the ambient samples of the two residential areas, both the ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb ratios exhibited a seasonal pattern, with relatively higher mean ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb ratios during the summer season. It was further confirmed that the ambient Pb concentrations were significantly higher at the ISS than those for RA1, which in turn were significantly higher than those for RA2. At all three sampling sites, high enrichment factor values (≥ 475) were found for Pb.     

Le réseau de fracturation,facteur initial de la karstification des craies dans les collines du Perche : l’exemple du site de la Mansonnière (Bellou-sur-Huisne,Orne, France)

Résumé

Le facteur tectonique est reconnu depuis longtemps comme initiateur de la première phase de karstification, mais sans que ceci n’ait jamais été démontré car les témoignages des premières phases sont détruits par le développement de la karstification. Les qualités hydrologiques mixtes de la craie permettent de conserver une grande variété de formes spécifiques, illustrant différents stades d’évolution, depuis l’originel « primokarst » jusqu’au classique drain polyphasé.

Dans les collines du Perche, de très récentes recherches ont mis en évidence des galeries endokarstiques particulières, comblées de sables et d’argiles. Les analyses physiques, chimiques et rayons X ont démontré que ces remplissages résultent non pas d’un processus classique de dépôt fluviatile, mais au contraire d’un processus d’altération soulignant la progression d’un front d’altération dans la craie, jusqu’à la surface piézo- métrique. Les remplissages ne sont pas des dépôts sédimentaires, mais représentent une sorte de « fantôme de roche », résultant d’une transformation in situ de la craie, sans aucun transport de matière solide.

La genèse résulte de la progression de fronts d’altération installés sur le réseau de fissures de la zone d’introduction (de la surface jusqu’au toit de la nappe). À la rencontre de la nappe de la craie, le mélange des eaux produit une activité chimique qui ouvre la fissure originelle. Des galeries comblées, semblables à celles du karst classique, se forment, sans jamais avoir connu de drainage fluviatile. Ces galeries illustrent le premier degré d’une évolution karstique classique, juste avant qu’un flux draine la galerie constituant un nouveau degré de karstification : le conduit drainé. La spécificité de la région du Perche est que la karstification s’y est arrêtée au premier stade, illustrant le « primokarst » modélisé mais jamais décrit jusqu’alors. Les conditions de cette genèse sont acquises lorsque le site offre un réseau de fractures bien développé, une absence de formations superficielles, une perméabilité élevée du sol, une absence de drainage superficiel (pas de perte concentrée), et un encaissant relativement poreux. © Elsevier, Paris     

Point process models for fine-resolution rainfall

Abstract

In a recent development in the literature, a new temporal rainfall model, based on the Bartlett-Lewis clustering mechanism and intended for sub-hourly application, was introduced. That model replaced the rectangular rain cells of the original model with finite Poisson processes of instantaneous pulses, allowing greater variability in rainfall intensity over short intervals. In the present paper, the basic instantaneous pulse model is first extended to allow for randomly varying storm types. A systematic comparison of a number of key model variants, fitted to 5-min rainfall data from Germany, then generates further new insights into the models, leading to the development of an additional model extension, which introduces dependence between rainfall intensity and duration in a simple way. The new model retains the original rectangular cells, previously assumed inappropriate for fine-scale data, obviating the need for the computationally more intensive instantaneous pulse model.

Editor D. Koutsoyiannis     

CHANNEL CHANGES IN ARID BADLANDS,BORREGO SPRINGS,CALIFORNIA

Geometric, hydraulic, and sediment characteristics in arid badlands near Borrego Springs, California, are examined in relation to precipitation events of varying magnitude and frequency. The longitudinal and cross profiles of five ephemeral channels occupying a 2.5 km² catchment were surveyed under pre-and post-storm conditions during the February 1976-December 1978 period. Such arid region channels offer the opportunity to observe and explain rates and methods of profile change under different flow types in a short period of time. Catchment responses to light winter events include substantial lags between initial precipitation and channel runoff, the limited downstream movement of small slugs of sediment, high losses of discharge into channel alluvium, and prolonged mass movement of debris from adjacent hillslopes into the channels following the storm events thus promoting aggradation along certain channel reaches. Responses to intense summer storms include explosive channel and hillslope runoff and localized scour and fill, both during and following such events, thereby promoting substantial aggradation and erosion along portions of the channels. Although ephemeral flow conditions may produce channel profiles which are distinct from those in perennial streams, the evaluation of the methods of sediment transport and the storage of debris in arid catchments offer useful explanation for other environments.     

Zonal winds at high latitudes on Venus: An improved application of cyclostrophic balance to Venus Express observations

Recent retrievals of zonal thermal winds obtained in a cyclostrophic regime on Venus are generally consistent with cloud tracking measurements at mid-latitudes, but become unphysical in polar regions where the values obtained above the clouds are often less than or close to zero. Using a global atmospheric model, we show that the main source of errors that appear in the polar regions when retrieving the zonal thermal winds is most likely due to uncertainties in the zonal wind intensity in the choice of the lower boundary condition.Here we suggest a new and robust method to better estimate the lower boundary condition for high latitudes, thereby improving the retrieved zonal thermal winds throughout the high latitudes middle atmosphere. This new method is applied to temperature fields derived from Visible and Infrared Thermal Imaging Spectrometer (VIRTIS) data on board the Venus Express spacecraft. We obtain a zonal thermal wind field that is in better agreement with other, more direct methods based on either retrieving the zonal winds from cloud tracking or from direct measurements of the meridional slope of pressure surfaces.