晚中生代─新生代南海周缘地块运动与南海演化

报道了由华南几个盆地的古地磁数据综合而得的反映该区白垩纪以来古纬度变化曲线，结合Ｓｃｈｍｉｄｔｋｅ等（１９９０）发表的加里曼丹１５０Ｍａ以来的古地磁数据，表明华南与加里曼丹在４０Ｍａ前具有大致相同的古纬度变化史，差异仅出现在距今３０Ｍａ前后和１０Ｍａ以来。若此趋势可靠，则可作出下列推断：（１）南海的扩张只能发生在距今３０Ｍａ附近或１０Ｍａ以后华南与加里曼丹反向运动时期；距今３０Ｍａ的扩张已被广为接受；（２）华南与加里曼丹之向可能存在的古南海只能在９１Ｍａ之前存在；（３）南海演化可能存在两期扩张。南海的拟合可通过沿３５００ｍ等深线的先道时针旋转、后北向平移两个步骤完成。这与Ｈａｙａｓｈｉｄａ等（１９９１）提出的日本海张开与扩张模式很相似，提示东亚边缘海的形成和演化可能具有同样的机制。华南距今５０Ｍａ以来的古纬度变化与Ｔａｐｐｏｎｎｉｅｒ（１９８２）的传播挤出构造模式所预期的基本吻合，表明距今５０Ｍａ以来华南古纬度变化的运动学机制可用Ｔａｐｐｏｎｎｉｅｒ模式作解释。     

东海黑潮及琉球群岛以东海流研究进展

东海是西太平洋的一个边缘海,它西部有广阔的大陆架,东面以九州岛、琉球群岛(由奄美诸岛、冲绳诸岛、先岛诸岛组成)和台湾岛连线为界,具有较深的海槽。黑潮是一支高温、高盐、高流速的西边界流,它起源于菲律宾以东海域、流经台湾东岸进入东海,沿东海大陆架外缘向东北向流动，穿越吐噶喇海峡返回太平洋。通常的把自台湾东北端起至吐噶喇海峡一段称为东海黑潮。此外,在琉球群岛以东海域也常年存在一支稳定的西边界流,称为琉球海流。 对于东海黑潮和琉球海流的硏究,主要起步于20世纪80年代,通过进行中日联合调查研究、中日副热带环流调查研究等,取得了许多重要成果,苏纪兰(1994)、袁耀初(2000，Yuan,2006)、管秉贤(2002)等人都做过评述。本文基于以上研究评述,主要叙述200年以来对东海黑潮及琉球海流的硏究新进展。     

海水中金属设施防腐、防海洋生物污损及检测技术研究

随着工业的高速发展和人口的急剧増加及环境污染的加剧，淡水资源危机已引起世界各国的普遍关注。据统计，城市用水中工业用水通常占80%左右，而工业用水中有80%是工业冷却用水，所以开发利用海水代替淡水直接作冷却用水是节约淡水的重要途径。海水直流冷却系统具有深海取水温度低且恒定、冷却效果好和系统管理简单等优点，但必须具备以下条件:(1)管道系统防除生物附着污损；(2)管道系统的防结垢；(3)金属腐蚀与防护。多年来有关方面虽然相应地采取了许多措施，但由于主设备通常需常年连续运行，因而往往出现在某段时间、某些部位上效果降低与失效。现行的对海水环境中生物附着腐蚀检测主要采取取样离位分析方法，其结果与实际状态有差异，且生过程中许多重要部位，如海上平台、浮码头、船舶、海滨电厂、化工厂的海水冷却系统和海水管路的管道内、及死角区都很难取样，必要时只有定期停机检查(侯保荣1998； Efird，1976；吉井彻，1967)，造成很大的经济损失。 防止海水环境中的金属设施遭受海水腐蚀和海洋生物污损的方法很多，通常采用阴极保护、防污涂料、电解海水或电解重金属等方法，但这些方法的缺点是：(1)阴极保护能防止金属腐蚀而不能防止海洋生物附着；(2)防污涂料涂刷一次，只能用3-5年，对许多一次性埋入水中的管件无法进行二次补涂，防污涂料所释放出的毒物将长期污染环境；(3)利用电解海水或电解重金属所产生的次氯酸钠或重金属离子来进行防污，即电解防污效果明显，但对金属防腐的作用不大(侯保荣，1999;陈光章，1994;马土德，1996)。总结前人的经验，经过多年的研究，我们利用电化学方法研制出既能防止金属海水腐蚀又能防生物附着的双防与检测新技术系统装置，已通过实海实验，取得了良好的效果。     

中国"数字海洋"发展的基本构想

为迎接海洋２１世纪,中国从国家发展的战略的高度出发,将发展“数字海洋”列入“十五”和２０１５年海洋科学发展计划。其目标是广泛收集海洋立体监测信息,全面完成海洋信息化工程和空间数据基础设施建设基本实现海洋信息共享和“数字海洋”基础工程建设。     

Grey Prediction of Siltation in North Channel of Yangtze Estuary

-The North Channel in the Yangtze Estuary is one of sea-leading waterways of Shanghai Harbour, in which yearly dredging volume reaches over ten million cubic meters, and it tends to increase year by year. Based on the channel regime similarity and through the relational grade, a GM (2, 1) is set up. It reveals the course of development of channel regime similarity under the action of various factors, and predicts the siltation volume in the nearest future which is the basis of dredging planning for relevant dredging departments.     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

层结流体中的非线性惯性重力内波

根据地球流体力学基本方程组,在密度垂直层结的情况下,引进行波坐标,研究非线性定形波在相平面上的几何拓扑结构。严格论证了不存在定形孤立波,并通过Ｈａｍｉｌｔｏｎ函数及其角作用变把行波系统化成最简形式,由此而得到非线性惯性重力内波的解析解。