地电实验的电阻率变化形态特征

在地震预报研究中,地电阻率变化形态被作为地震预报的一种前兆手段.迄今为止,国内外已经做了许多不同加载方式的室内和室外岩石或样品的电阻率变化实验,积累了相当丰富的承载岩石或样品的电阻率变化资料.本文介绍部分不相似的实验结果,以促使此项研究进一步深入发展.     

Estimation of Site Effects in Beijing City

— For the realistic modeling of the seismic ground motion in lateral heterogeneous anelastic media, the database of 3-D geophysical structures for Beijing City has been built up to model the seismic ground motion in the City, caused by the 1976 Tangshan and the 1998 Zhangbei earthquakes. The hybrid method, which combines the modal summation and the finite-difference algorithms, is used in the simulation. The modeling of the seismic ground motion, for both the Tangshan and the Zhangbei earthquakes, shows that the thick Quaternary sedimentary cover amplifies the peak values and increases the duration of the seismic ground motion in the northwestern part of the City. Therefore the thickness of the Quaternary sediments in Beijing City is the key factor controling the local ground effects. Four zones are defined on the base of the different thickness of the Quaternary sediments. The response spectra for each zone are computed, indicating that peak spectral values as high as 0.1 g are compatible with past seismicity and can be well exceeded if an event similar to the 1697 Sanhe-Pinggu occurs.     

山西省主要河流流域面雨量预报业务流程

以T213、HLAFS模式、MM5中尺度模式输出的格点资料以及日本降水量格点资料为基础，将影响山西降水的天气动力模型归纳为诊断模型，从中引出多个能够全面反映降水模型特征的综合物理因子；根据各种数值模式输出的降水量预报性能和质量优劣特点，依据数值模式的形势场预报优于要素场预报的现实，构造在不同环流形势背景下，启动不同预报方程的面雨量预报业务流程，有效地遏止了在环流形势调整时预报输出不能快速响应的弱点，提高了点和面雨量预报的准确度。     

铜陵地区老鸦岭层状钼矿床铅同位素组成研究

安徽铜陵老鸦岭矿床中二叠系大隆组(P2d)顶部的含矿(钼矿化)黑色页岩以及附近(立新煤矿)同一层位不含矿黑色页岩的实测铅同位素组成分别为：^206Pb/^204Pb20.20～22.37,^207Pb/^204Pb15.67～15.82,^208Pb/^204Pb38.47～38.60和^206Pb/204Pb18.83～20.80,^207Pb/^204Pb15.65～15.76,^208Pb/^204Pb38．84～39．22。对137Ma的放射成因Pb进行校正后的铅同位素组成表明，含矿黑色页岩和不含矿黑色页岩均与燕山晚期火成岩无关，老鸦岭含矿黑色页岩可能具沉积成因。对沉积(约250Ma)以来的放射成因Pb进行校正后的铅同位素组成表明：不含矿黑色页岩的Pb源自上地壳，而含矿黑色页岩的Pb(因而推测其他成矿金属)可能源于上地壳物质(与不含矿黑色页岩的Pb源相似)与下地壳物质的混合。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

On the long-term seismic hazard analysis in the Zhangjiakou–Penglai seismotectonic zone, China

The Zhangjiakou–Penglai seismotectonic zone (ZPSZ) lies in the northern part of North China and extends along the Zhangjiakou–Beijing–Tianjin–Bohai Bay–Penglai–Yellow Sea. It is about 900 km long and some 250 km wide in a northwest direction. The great Sanhe-Pinggu (M_S=8.0) earthquake occurred on September 1679 and the Tangshan (M_S=7.8) earthquake on July 1976 caused serious economic and life losses. According to some differences in crust structure and regional tectonic stress field, the ZPSZ is divided into western and eastern segment by the 117°E line for study on long-term seismic hazard analysis. An analysis of Gutenberg–Richter's empirical relation of earthquake-frequency and time process of historic and recent earthquakes along the eastern and western segments shows that the earthquake activity obeys a Poisson process, and these calculations indicate that the earthquake occurrence probability of M_S=6.0–6.9 is 0.77–0.83 in the eastern segment and the earthquake occurrence probability of M_S=7.0–7.9 is 0.78–0.80 in the western segment of the ZPSZ during a period from 2005 to 2015.     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.     

Asynchronous Holocene climatic change across China

A review of Holocene climatic variations in different parts of China shows that they were asynchronous. Proxy data from ice cores, pollen, loess, lacustrine sediments, and changes of sea and lake levels demonstrate that many warm and cold oscillations have occurred in China during the Holocene, including a most important climatic event known as the “Holocene optimum,” a milder and wetter period, and that the duration and amplitude of the optimum period, as well as its start and end times, differed in different parts of China. Uplift of the Tibetan plateau over the past millions of years led to the development of the monsoon climate and to complex atmospheric circulation over continental China during the Holocene. As a result, the Holocene optimum began and terminated earlier in high-altitude regions of western China than at lower elevations in eastern China, and the amplitude of the variations was lower in the east. This suggests that the western higher-altitude areas were more sensitive to climatic change than were the eastern lower-altitude areas. Holocene climatic records in the Dunde and Guliya ice cores do not correspond. Inverse δ¹⁸O variations between the two cores indicate that the effects of climate and atmospheric processes on the stable isotopes at the two sites differed. The correlation between the isotopic composition of carbonates in lake deposits in western China and climatic variations is similar to that in the ice cores. The climatic resolution in ice cores and lake sediments is higher than that in other media. The lack of precise correspondence of climatic records constructed on the basis of proxy data from different parts of China is a result of the different locations and elevations of the sampling sites, the different resolutions of the source material, and the varied climatic conditions within China. Further work is needed to confirm both the conclusions and the inferences presented here.     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

Geochemistry and occurrence of inorganic gas accumulations in Chinese sedimentary basins

Inorganic gases are commonly seen in eastern China and occasionally in southern China from the shallow water columns above hot and cold springs. The gases contain 68% to nearly 100% CO₂, with δ¹³C_CO2 and δ¹³C₁ values in the range of −1.18‰ to −6.00‰ and −19.48‰ to −24.94‰, respectively. All of the 34 large inorganic CO₂ and one inorganic methane accumulations discovered in China are distributed in eastern parts of the country, from both onshore and continental shelf basins. No commercial inorganic gas accumulation has been found in central and western China. This is a review of the occurrence and geochemical characteristics of inorganic gas accumulations in Chinese sedimentary basins. A detailed study of gas samples collected from four representative inorganic CO₂ pools and one possible inorganic methane pool indicates that inorganic alkane gases typically show δ¹³C₁ values greater than −10‰ versus PDB (mostly −30‰), with a positive stable carbon isotope sequence of δ¹³C₁ < δ ¹³C₂ < δ¹³C₃ < δ ¹³C₄. In contrast, the δ¹³C₁ values of biogenic alkane gases are lighter than −30‰, with a negative isotope sequence (i.e. δ¹³C₁ > δ¹³C₂ > δ ¹³C₃ > δ¹³C₄). Inorganic gases also tend to show less negative δ¹³C_CO2 values (−10‰) than biogenic gases (<−10‰).