长江口泥沙絮凝静水沉降动力学模式的试验研究

细颗粒泥沙在咸水中的絮凝沉降是河流泥沙向海输送过程中在河口区发生的重要现象，是河口拦门沙形成与发育的主要原因之一。本文根据室内模拟试验研究，提出长江口泥沙絮凝静水沉降的二级动力学模式，通过该式求得不同泥沙含量和盐度情况下絮凝沉降的衰减系数，半衰期和平均沉降速率等动力学参数，定量地分析泥沙含量和盐度对泥沙絮凝沉降过程的影响。     

合浦珠母贝铁的穆斯堡尔谱学研究

应用^57Fe穆斯堡尔谱学的方法研究了四个不同生长期合浦珠母贝铁的化学状态和Fe^2 /Fe^3 的值，它们的Fe^2 和Fe^3 的相对含量分别为4.1%～29.4%和76.6%～95.9%,Fe^2 /Fe^3 值的变化为0.043～0.42。3个月龄的Fe^2 /Fe^3 值大于10个月龄，从10个月龄到22个月龄的Fe^2 /Fe^3 值呈增加的趋势，这可能反映了不同生长期合浦珠母贝对不同价态的铁的需求。     

CHIMEHERB人工皮使用的体会

从1989年4月～1990年10月,我科在69例病人中使用CHIMEHERB人工皮,覆盖治疗了供皮区,Ⅱ°烧伤创面、脱痂创面的残余肉芽创面.临床应用表明:CHIMEHERB人工皮能加快创面的愈合,是目前较好的一种创面覆盖物,用人工皮覆盖创面2～3天后,人工皮干燥,不需再换药,可减轻病人的痛苦.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

黑潮水入侵南海的水文分析──Ⅱ.1994年8—9月期间的观测结果

利用1994年8－9月期间，由台湾海峡两岸的4艘海洋调查船在南海东北部海域所获之CTD和ADCP资料，并结合1992年3月间在同一海域获取的CTD资料及部分历史水文资料，对该区域的海水特性以及黑潮水入侵南海等问题进行了分析探讨。结果表明：调查期间，本海区水团分布与冬末、春初（1992年3月）航次基本相似，即南海和西北太平洋海域的海水结构有着各自相对独立的温、盐度特性。虽发现有黑潮水穿越巴上海峡进入南海，但其势力甚弱。因此，在夏末秋初，黑潮亦无直接的分支深入南海，即使在巴士海峡北端进入台湾海峡的黑潮水，其影响也是十分微弱的。由等密度面、地转流分析和实测ADCP资料显示，在调查海区的东南海域存在一支较强的N向流动。它沿菲律宾西海岸北上，绕过吕宋岛西北角流向东北，在巴上海峡呈现与黑潮水混合的迹象，其水体在冬季明显呈高温、低盐的特性；夏季则为相对低温、低盐。故在冬季的几幅卫星图像上也有较好的体现，很有可能长年存在。     

Summer distribution and geochemical composition of suspended-particulate matter in the east china sea

The distribution and geochemical composition of suspended-particulate matter (SPM) in the East China Sea (ECS) were investigated during the summer period of high continental runoff to elucidate SPM sources, distribution and cross-shelf transport. The spatial variability of SPM distribution (0.3–6.5 mg l⁻¹) and geochemical composition (POC, Al, Si, Fe, Mn, Ca, Mg and K) in the ECS was pronounced during summer when the continental fluxes of freshwater and terrestrial materials were highest during the year. Under the influences of Changjiang runoff, Kuroshio intrusion, surface production and bottom resuspension, the distribution generally showed strong gradients decreasing seaward for both biogenic and lithogenic materials. Particulate organic carbon was enriched in surface water (mean ∼18%) due to the influence of biological productivity, and was diluted by resuspended and/or laterally-transported materials in bottom water (mean 9.4%). The abundance of lithogenic elements (Al, Si, Fe, Mn) increased toward the bottom, and the distribution correlations were highly significant. Particulate CaCO₃ distribution provided evidence that the SPM of the bottom water in the northern part of the study area was likely mixed with sediments originally derived from Huanghe. A distinct benthic nepheloid layer (BNL) was present in all seaward transects of the ECS shelf. Sediment resuspension may be caused by tidal fluctuation and other forcing and be regarded as the principal agent in the formation of BNL. This BNL was likely responsible for the transport of biogenic and lithogenic particles across or along the ECS shelf. Total inventories of SPM, POC and PN are 46, 2.8 and 0.4 Tg, respectively, measured over the total area of 0.45 × 10⁶ km² of the ECS shelf. Their mean residence times are about 27, 13 and 11 days, respectively. The inventory of SPM in the water column was higher in the northernmost and southernmost transects and lower in the middle transects, reflecting the influences of terrestrial inputs from Changjiang and/or resuspended materials from Huanghe deposits in the north and perhaps from Minjiang and/or Taiwan’s rivers in the south. The distribution and transport patterns of SPM and geochemical elements strongly indicate that continental sources and cross-shelf transport modulate ECS particulate matter in summer.     

新生相形成的模拟实验研究

通过模拟实验制备了硅酸盐类不溶性固体，从Ｘ射线衍射特征和红外光谱特征两方面看，制得的硅酸盐类与河口新生相成分，结构相似，表明铁水解成的β－ＦｅＯＯＨ胶体吸附Ｓｉ，Ａｌ，Ｍｇ，Ｋ等元素，经结构重组可形成硅酸盐矿物，这可能是河口体系新生相的形成原因。     

甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

我国东部邻海恶劣天气的时空分布及其成因初探

本文利用1930～1979年NCDC海洋船舶观测的气象资料,分析了中国东部邻海恶劣天气的时空分布。结果表明,海区恶劣天气的分布在冬季和夏季是不同的;在东北和西南季风期间,台湾东北和西南海区也有差异。影响恶劣天气条件的分布因子非常复杂,主要是季风和极锋、天气系统、冷暖洋流及地形等因子。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.