张宣幔枝构造的成矿作用研究

地幔热柱具有多级演化特征。河淮亚热柱顶部地幔物质以薄板状斜插至燕山造山带之下，燕山造山带轴部东西向尚义－赤城韧性剪切带与太行山构造岩浆带轴部北北东向乌龙沟－上黄旗韧性剪切带交汇叠加，使深部中下地壳应变软化岩石及深部幔源物质减压释荷产生深熔岩浆并上侵，从而加速了造山带的上隆速度，并可形成地幔热柱的第三级构造单元——幔枝构造。其中隆升较快的地段发育成为典型的变质核杂岩构造。幔枝构造控制着构造变形－岩浆活动－蚀变变质－成矿作用统一体系，并形成与幔枝构造密切相关的内带为金（铜钼）、外带为银（铅锌）多金属的成矿系列。论述了不同构造部位的成矿特征及其相关性、统一性。据此提出了在有利构造部位（参照已有矿点分布）扩大找矿和向深部扩大找矿的认识。     

新一代天气雷达对一次暴洪的监测

利用三门峡雷达结合乡镇雨量资料,分析了卢氏暴洪雷达回波生成、发展和演变,得出了天气雷达监测预警暴洪的参考结论:基本反射率因子上表现为混合降水回波,强回波多次经过某一地方时,因"列车效应"可造成该地过程降水量的显著增大;平均径向速度图上有暖平流S弯曲、南风急流和风速辐合、逆风区;风廓线上偏南风层次伸至12km以上和低空急流长时间稳定维持表明本过程湿层厚、中低层有充足水汽输送,根据风廓线风随高度的变化可以预测降水过程的开始、加强、维持和减弱阶段.     

青藏高原冬季平均温度、湿度气候特征的REOF分析

通过对青藏高原123个测站, 1961~1998年冬季 (12月至翌年2月) 平均温度、相对湿度资料做气候特征分析, 得到32°~33°N附近地区可能是高原南北温湿变化的分水岭, 以北主要受干冷空气影响, 以南主要受暖湿空气影响。用方差极大正交旋转EOF (即REOF) 方法对以上资料进行分析, 可以将青藏高原温度、相对湿度进行分型、分区, 并对各区的温度、相对湿度特征进行分析。结果表明, 近40年来, 各区的温度总趋势是在波动中逐步升高的。增温时段主要出现在1978~1981年及1983年至今。1983年开始的增温, 是近40年来最强的一次, 增温幅度大且持续时间长, 但从90年代开始增温幅度及范围出现波动。从温度线性倾向来看, 东部高原增温幅度从南到北存在“大—小—大”的现象。高原大部分地区湿度变化总趋势是在波动中逐步增湿的, 但高原北界以变干为主。从80年代后期至今高原进入显著增湿阶段, 但从90年代中后期开始增湿幅度及范围出现波动。从湿度线性倾向来看东部高原增湿幅度从南到北存在逐步减小现象, 甚至祁连山地区出现变干现象。     

郯庐断裂带中-南段中生代岩浆活动的构造背景与深部过程

郯庐断裂带内岩浆岩及糜棱岩的年龄及野外研究表明以中-酸性为主的岩浆活动主要发生在早白垩世走滑运动的晚期,岩石化学以富钾、富碱为特征;稀土元素以轻稀土富集、重稀土亏损为特征;微量元素表现出富集大离子亲石元素,尤其是强不相容元素;同位素组成显示岩浆来源于壳幔过渡带.带内岩浆活动明显受断裂带控制,走滑晚期的岩浆活动起源于地幔底侵、壳幔相互作用下的壳幔过渡带,在伊泽奈崎板块斜向俯冲、中国东部遭受区域性剪切-挤压的背景下出现.在此背景下中国东部发生了岩石圈减薄,同时出现了一系列北东-北北东向已深切至壳幔边界的左行平移断裂系,从而诱发了大规模的岩浆活动.     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

Weak GPS signal tracking using FFT discriminator in open loop receiver

An open loop tracking architecture, which tracks GPS signals under weak and challenging conditions, is analyzed. The in-phase and quadrature-phase integration pair is regarded as a single tone complex signal. An FFT-based method is used as a frequency discriminator to estimate the Doppler frequency residual of the single tone signal. Another FFT-based method applies complex squaring to eliminate the effect of the navigation data bits polarities. The performance of the FFT-based discriminators is assessed in three criteria. Those criteria are the signal strength and dynamic range that can be tracked and the accuracy of the estimated Doppler frequency. In addition, the performance of the discriminators is analyzed to provide the theoretical and simulated peak detection probability. The results indicate that the FFT discriminator can track signals about 5 dB weaker than the signals that can be tracked by the complex squared FFT discriminator. In a quasi-static environment, the Doppler frequency residual can be assumed to be around zero, which can enable the FFT-based discriminators to track signals with approximately 2 dB less power. Moreover, the performance of the FFT-based discriminators is compared with the performance of two other frequency discriminators, namely the fast–slow and power-based. The comparison results indicate that these two frequency discriminators give higher frequency estimation accuracy, but they have a narrower dynamic range.