Temporal evolution of surface humidity in Spain: recent trends and possible physical mechanisms

We analyzed the evolution of surface relative humidity (RH) and specific humidity (q) in Spain, based on complete records available from the State Meteorological Agency of Spain. The surface RH records used span the period 1920–2011, but because of spatial and temporal constraints in the dataset we used a subset of the data, covering the period 1961–2011. The subset contained 50 monthly series of RH, which were created through a process of quality control, reconstruction and homogenization. The data shows that there was a large decrease in RH over mainland Spain from 1961 to 2011, which was greatest in spring and summer. In contrast, there was no overall change in the specific humidity in this period, except in spring, when an increase was observed. The decrease in RH affected the entire country, but the changes in specific humidity were less homogeneous. For specific humidity there was a general increase in the northern and eastern parts of Spain, whereas negative trends dominated in the central and southern areas, mainly during the summer months. The results suggest that an increase in the water holding capacity of the atmosphere as a consequence of warming during recent decades has not been accompanied by an increase in the surface water vapor content, probably because the supply of water vapor from the main terrestrial and oceanic areas has been constrained. We discuss the implications of these findings for evapotranspiration processes, precipitation and water management in Spain.     

Progressive extensional shear structures in a detachment contact in the Western Sierra Nevada (Betic Cordilleras,Spain)

Abstract

The present contact caused by the superposition of the Alpujarride complex over that of the Nevado-Filabride in the western area of Sierra Nevada and Sierra de Filábres corresponds to a detachment. The deformation in the footwall associated with this contact, produced mylonitic fabrics with a significant stretching-lineation, over which brittle structures are superimposed. The deformation in the hanging wall associated with this contact is, on the other hand, essentially brittle. These deformations are subsequent to a series of syn-to post-metamorphic structures related to thrust phases.

The micro- and meso-structures indicate that the hanging wall has moved towards the west-south-west.

Other brittle structures, which began during the same extensional regime, are superimposed on the detachment and have continued to develop up to the present time. These structures were produced in an extensional regime with a non-coaxial deformation component and suggest the possibility of a tectonic evolution similar to that described for core complexes in the USA.     

Mission design through averaging of perturbed Keplerian systems: the paradigm of an Enceladus orbiter

Preliminary mission design for planetary satellite orbiters requires a deep knowledge of the long term dynamics that is typically obtained through averaging techniques. The problem is usually formulated in the Hamiltonian setting as a sum of the principal part, which is given through the Kepler problem, plus a small perturbation that depends on the specific features of the mission. It is usually derived from a scaling procedure of the restricted three body problem, since the two main bodies are the Sun and the planet whereas the satellite is considered as a massless particle. Sometimes, instead of the restricted three body problem, the spatial Hill problem is used. In some cases the validity of the averaging is limited to prohibitively small regions, thus, depriving the analysis of significance. We find this paradigm at Enceladus, where the validity of a first order averaging based on the Hill problem lies inside the body. However, this fact does not invalidate the technique as perturbation methods are used to reach higher orders in the averaging process. Proceeding this way, we average the Hill problem up to the sixth order obtaining valuable information on the dynamics close to Enceladus. The averaging is performed through Lie transformations and two different transformations are applied. Firstly, the mean motion is normalized whereas the goal of the second transformation is to remove the appearance of the argument of the node. The resulting Hamiltonian defines a system of one degree of freedom whose dynamics is analyzed.     

The 2012/2014 swarmquakes of Jaen,Spain: a working hypothesis involving hydroseismicity associated with the hydrologic cycle and anthropogenic activity

A total of 2,300 swarmquake-type seisms have been striking the Torreperogil–Sabiote Hill (TSH) in southern Spain (Jaen) from October 2012 to the present, involving a major seismic crisis with six subseries until May 2013 (TSH seismic series, TSHS), followed by seven final series (FS). Two mild premonitory events occurred nearby in 2010–2011. Several evidences suggest cause–effect relationships between water and seismicity at the TSH: (1) The characteristics of seisms with a vast majority of ill-defined shallow/small events, spatial/temporal variations of the better constrained diffuse swarmquakes, increasing seismic velocities preceding stronger events, marked periodicities, abundant hydro-tremors, etc. (2) A series of spatial/temporal relationships between water and seismicity: Time lags between rainfall/reservoir peaks and seismic peaks; spatial links between swarmquakes and several factors (underground hydrogeology, reservoirs, etc.); etc. (3) From May 2013 to January 2014 evolution of rainfall and FS seismicity declined drastically at the same time. We suggest a hydroseismic hypothesis for TSH swarmquakes resulting from a complex series of cumulative factors: (1) A million-years natural setting involving geological, hydrogeological, geomorphological and tectonic elements. (2) A decades-long series of natural and anthropogenic factors are as follows: the 2012/2013 meteorological change, the massive overexploitation of the confined aquifers and alternating impoundment/emptying of the Giribaile reservoir.     

Do Spartina maritima Plantations Enhance the Macroinvertebrate Community in European Salt Marshes?

Ecological restoration of salt marshes using plantations may enhance the macroinvertebrate community, but little is known about the development of benthic macroinvertebrates after ecological engineering projects in European salt marshes. This study analyzed the environment and the macroinvertebrate community in European salt marshes 3 years after restoration using Spartina maritima plantations in comparison with non-restored and preserved marshes in Odiel Marshes (Southwest Iberian Peninsula). We hypothesized that planting Spartina maritima on intertidal mudflats would increase species richness and diversity (Shannon–Weaver index) of the benthic macroinvertebrate community by increasing environmental heterogeneity, providing feeding resources and improving sediments characteristics. Benthic macrofauna samples (composed mainly of annelids, crustaceans, and mollusks) were sampled in plots of 20 cm?×?25 cm to 5 cm depth between +1.8 and +3.0 m above Spanish Hydrographic Zero. Sediment organic matter content, bulk density, pH, and redox potential were the variables that best explained macroinvertebrate distribution. Restored marshes achieved similar diversity and even higher specific richness than preserved marshes, although with differences in species composition. Non-restored marshes showed the lowest diversity. Restored and preserved marshes did not differ in total abundance or biomass of macroinvertebrates, both being higher than in non-restored marshes. The macroinvertebrate communities in preserved and non-restored marshes showed the largest difference in taxa composition, with restored marshes occupying an intermediate position. Salt marsh restoration using S. maritima increased the complexity (ecological diversity and species richness) and abundance of the benthic macroinvertebrate community. Our study offers new information about the role of salt marsh plants in mediating faunal communities via ecological engineering projects.     

Sensitivity analysis of main variables present in flash flood processes. Application in two Spanish catchments: Arás and Aguilón

The program Simulation of Hydrological Extreme Events provides a set of functionalities that combined together allows constructing, manipulating, analyzing and comparing the hydrological processes involved in flash flood generation. The program makes use of existing databases of interest in hydrology and available in Spain, such as digital terrain models, coverage of rainfall or curve number. Two pilot watersheds from Spain were selected, Arás and Aguilón, where flash flood episodes have taken place. A sensitivity analysis of the flash flood episodes in response to changes in the main hydrological processes involved has been made, such as spatial and temporal distribution of rainfall, soil moisture status and water flow through channel network. In this work, we found that the antecedent moisture condition is the most influential factor in the magnitude of flash floods produced by the same amount of rain. The temporal distribution of the storm represents the second characteristic in order of relevance. In addition, terrain morphology (specially the slope) is found to be decisive in the results differences obtained.     

Stochastic Simulation of Nonstationary Rainfall Fields, Accounting for Seasonality and Atmospheric Circulation Pattern Evolution

A model for generating daily spatial correlated rainfall fields suitable for evaluating the impacts of climate change on water resources is presented. The model, termed Stochastic Rainfall Generating Process, is designed to incorporate two major nonstationarities: changes in the frequencies of different precipitation generating mechanisms (frontal and convective), and spatial nonstationarities caused by interactions of mesoscale atmospheric patterns with topography (orographic effects). These nonstationarities are approximated as discrete sets of the time-stationary Stochastic Rainfall Generating Process, each of which represents the different spatial patterns of rainfall (including its variation with topography) associated with different atmospheric circulation patterns and times of the year (seasons). Each discrete Stochastic Rainfall Generating Process generates daily correlated rainfall fields as the product of two random fields. First, the amount of rainfall is generated by a transformed Gaussian process applying sequential Gaussian simulation. Second, the delimitation of rain and no-rain areas (intermittence process) is defined by a binary random function simulated by sequential indicator simulations. To explore its applicability, the model is tested in the Upper Guadiana Basin in Spain. The result suggests that the model provides accurate reproduction of the major spatiotemporal features of rainfall needed for hydrological modeling and water resource evaluations. The results were significantly improved by incorporating spatial drift related to orographic precipitation into the model.     

The Science Operations Centre of MINISAT-01

The Scientific Operations Centre (C.O.C.) takes care of all aspects of theMinisat-01 Mission related to the payload and its scientific instruments. Operations planning, preparation of commands, monitoring of the scientific instruments and data processing and distribution are the daily tasks carried out at the COC. We review these tasks along the operational life of Minisat-01 and we present a summary of the science operations andsome statistics on the usage of the satellite.