A computationally efficient approach for estimating high-rate satellite clock corrections in realtime

Realtime satellite clock corrections are usually estimated using undifferenced phase and range observations from a global network. Because a large number of ambiguity parameters must be estimated, the computation is time-consuming. Consequently, only a sparse global network of limited number of stations is processed by most IGS Realtime Analysis Centers with an update rate of 5 s. In addition, it is very desirable to build the capability to simultaneously estimate clock corrections for multi-GNSS constellations. Although the estimation can be sped up by epoch-differenced observations that eliminate ambiguities, the derived clocks can contain a satellite-specific bias that diminishes the contribution of range observations. We introduce a computationally efficient approach for realtime clock estimation. Both the epoch-differenced phase and undifferenced range observations are used together to estimate the epoch-differenced satellite clocks and the initial clock bias for each satellite and receiver. The biased clock corrections accumulated from the estimated epoch-differenced clocks are then aligned with the estimated clock biases and provided as the final clock corrections to users. The algorithm is incorporated into the EPOS-RT software developed at GFZ (GeoForschungsZentrum) and experimentally validated with the IGS global network. The comparison with the GFZ rapid products shows that the accuracy of the clock estimation with the new approach is comparable with that of the undifferenced approach, whereas the computation time is reduced to one-tenth. As a result, estimation of high-rate satellite clocks from a large reference network and tracking satellites of multi-GNSS constellations becomes achievable.     

Intrusive origin for Upper Group (UG1, UG2) stratiform chromitite seams in the Dwars River area, Bushveld Complex, South Africa

Detailed geological mapping, core logging and petrographic analysis are supplemented with geochemical data to evaluate the petrogenesis of the Upper Group (UG1, UG2) stratiform chromitite seams in the Dwars River area, Bushveld Complex. Seven important and widespread features of UG1 and UG2 chromitite are addressed: (1) chromitite seams are dissociated from specific silicate successions and enclosed in Cr-rich silicates with a common genetic origin, (2) chromitite seams cut structures and textures in host silicates, have vein-like structures and host xenoliths, (3) chromitite seams are braided, (4) chromite grain distributions suggest flow segregation, (5) silicates in chromitite seams have modal proportions, forms and compositions different from those in binding silicate rocks, (6) PGE distributions in UG2 chromitite suggest flow segregation, and (7) chromitite seams are bound by coarse-grained silicates possibly formed through contact heating and/or de-volatization. These features are integrated into a model whereby UG chromitite seams developed from the intrusion of chromite crystal slurries. This model proposes that chromite grains first accumulated within structural traps of the Bushveld conduits, and that these accumulations were then re-mobilized with silicate melt (± sulfides and/or fluids?) to spread laterally as chromite crystal slurries within the layered ultramafic-mafic cumulates of the Bushveld Complex.     

Groundwater monitoring in Denmark: characteristics, perspectives and comparison with other countries

More than 99% of water use in Denmark is based on groundwater. Denmark has had a comprehensive national groundwater-monitoring programme since 1988 based on 74 well catchment areas and six small agricultural catchments with more than 1,500 screens at different depths for regular, mostly annual, water quality sampling. In addition, water samples from 10,000 abstraction wells are analysed every 3–5 years. The water is analysed for main components, inorganic trace elements, organic micro pollutants, and pesticides and their metabolites. A unique feature is the 20-year time-series data of inorganic pollutants. Groundwater modelling supports traditional monitoring to improve the conceptual geological understanding and to assess the quantitative status and the interaction between groundwater and surface water. The programme has been continuously adjusted to incorporate new knowledge from research programmes and meet new policy demands, currently the European Union Water Framework Directive, particularly with respect to an increased focus on quantitative aspects and on the groundwater/surface water interaction. The strengths and weaknesses of the Danish programme are assessed and compared with other national groundwater-monitoring programmes. Issues discussed include: strategic considerations for monitoring design, the link between research and monitoring, and adoption of responses to climate changes.     

Quantitative Recovery of Elemental Sulfur and Improved Selectivity in a Chromium-Reducible Sulfur Distillation

Chromium-reducible sulfur (CRS) distillations are intended to recover only reduced inorganic sulfur compounds (RIS) including elemental sulfur. However, the quantitative recovery of elemental sulfur is not ensured in common CRS-distillations. The new method presented here was designed to remedy this deficiency. An increase in ethanol concentration assured the quantitative recovery of elemental sulfur in various forms and, in addition, all other RIS-compounds were quantitatively recovered. Furthermore, the selectivity of the procedure was improved by an additional filtration step to eliminate zinc particles from the Cr(II)-solution. Thus, the recovery of sulfates and organic sulfur compounds was significantly decreased by a factor of up to 35, depending on the compound analysed. Exhaustive testing with a variety of pure phases, rock and soil samples demonstrated the precision and accuracy of the new method. The new protocol eliminated the constraints of previous procedures. The improved distillation efficiency for elemental sulfur ensured the quantitative recovery of all RIS-compounds in a single-step distillation.     

Plant functional type approach for a functional interpretation of altitudinal vegetation zones in the Alborz Mts., Iran

Mountains are an excellent system for evaluating ecological and biogeographical patterns. The obvious variations of the environmental factors along the altitude create different zones with adapted plant assemblages. However, few studies make use of plant functional type(PFT) for describing the variation of vegetation along altitudinal gradients. A PFT is a group of taxa with similar traits which respond similarly to the environmental gradients. In this study, we used PFTs as indicators describing five vegetation zones in the western Alborz Mt, Iran from 2000 – 4500 m. The plant trait data presented here covers six plant traits including growth form, stemleaf ratio, spinescence, hairiness, leaf consistency and plant height of 297 species. We considered altitude and soil factors to test the importance of environmental variables. We applied a multivariate analysis of three table ordination, i.e. environmental, species, and traits data to identify the PFTs. We further applied fourth-corner statistic to quantify trait-environment relationships. A constrained hierarchical clustering was used to detect five altitudinal zones and two zones of low and high nitrogen concentration. With regard to altitude wediscuss the distribution of species, traits and PFTs. Growth form, plant height and stem-leaf ratio were significantly related to altitude and nitrogen. We identified 19 PFTs from which 18 were significantly associated to one or more altitudinal zones. While the lower altitudinal zones contain a variety of PFTs higher altitudes contain less PFTs with the highest altitude containing only one single PFT, tiny rosette plants with soft mesomorphic leaves. We identified grazing and climatic harshness as well as rockiness as the most important drivers of the distribution of plant functional traits and types across the studied gradient.     

Implications of tree species–environment relationships for the responsiveness of Himalayan krummholz treelines to climate change

Climate warming is expected to advance treelines to higher elevations. However, empirical studies in diverse mountain ranges give evidence of both advancing alpine treelines as well as rather insignificant responses. In this context, we aim at investigating the sensitivity and responsiveness of the near-natural treeline ecotone in Rolwaling Himal, Nepal, to climate warming. We analysed population densities of tree species along the treeline ecotone from closed forest stands via the krummholz belt to alpine dwarf shrub heaths (3700-4200 m) at 50 plots in 2013 and 2014. We quantified species - environment relationships, i.e. the change of environmental conditions (e.g., nutrient and thermal deficits, plant interactions) across the ecotone by means of redundancy analyses, variation partitioning and distance-based Moran's eigenvector maps. In particular, we focus on explaining the high competitiveness of Rhododendron campanulatum forming a dense krummholz belt and on the implications for the responsiveness of Himalayan krummholz treelines to climate change. Results indicate that treeline trees in the ecotone show species-specific responses to the influence of environmental parameters, and that juvenile and adult tree responses are modulated by environmental constraints in differing intensity. Moreover, the species - environment relationships suggest that the investigated krummholz belt will largely prevent the upward migration of other tree species and thus constrain the future response of Himalayan krummholz treelines to climate warming.     

Hydro-micromechanical modeling of wave propagation in saturated granular crystals

Biot theory predicts wave velocities in a saturated granular medium using the pore geometry, viscosity, densities, and elastic moduli of the solid skeleton and pore fluid, neglecting the interaction between constituent particles and local flow, which becomes essential as the wavelength decreases. Here, a hydro-micromechanical model, for direct numerical simulations of wave propagation in saturated granular media, is implemented by two-way coupling the lattice Boltzmann method (LBM) and the discrete element method (DEM), which resolve the pore-scale hydrodynamics and intergranular behavior, respectively. The coupling scheme is benchmarked with the terminal velocity of a single sphere settling in a fluid. In order to mimic a small amplitude pressure wave entering a saturated granular medium, an oscillating pressure boundary on the fluid is implemented and benchmarked with the one-dimensional wave equation. The effects of input waveforms and frequencies on the dispersion relations in 3D saturated poroelastic media are investigated with granular face-centered-cubic crystals. Finally, the pressure and shear wave velocities predicted by the numerical model at various effective confining pressures are found to be in excellent agreement with Biot analytical solutions, including his prediction for slow compressional waves.     

Monitoring well interception with fractures in clayey till

When using monitoring wells for investigation of contaminant sources in clayey till, there is a high risk that fractures may cause mobile contaminants to bypass the monitoring wells. This paper indicates that the probability of interception between monitoring wells and hydraulic conductive fractures is often significantly less than 50%. Based on a field experiment and application of a calibrated discrete fracture matrix diffusion numerical model (FRAC3Dvs), the paper also evaluates pesticide-monitoring results for different positions of monitoring well screen relative to fractures. For well screens situated 0.25 and 2 m from a conductive fracture, the first concentrations of the pesticide metabolite (2,6 dichlorobenzamide, "BAM") would be measured two years and 18 years, respectively, after the contaminant had been transported into an underlying aquifer. In this way, underlying aquifers may be subjected to contamination by downward moving contamination without being observed in monitoring wells in the till.     

Surface metal enrichment and partitioning of metals in a dated sediment core from a Norwegian fjord

A 24-cm long sediment core from an oxic fjord basin in Ranafjord, Northern Norway, was sliced in 2 cm sections and analysed for As, Co, Cu, Ni, Hg, Pb, Zn, Mn, Fe, ignition loss and Pb-210. Partitioning of metals between silicate, non-silicate and non-detrital phases was assessed by leaching experiments, in an attempt to understand the mechanisms of surface metal enrichment in sediments. Relative to metal concentrations in sediments deposited in the 19th century, metals in near surface sediments were enriched in the following order: Pb > Mn > Hg > Zn > Cu > As > Fe. Cobalt and Ni showed no enrichment. The non-detrital fraction of Cu, Pb, Mn and Zn was significantly higher in the upper 10 cm than at greater depth in the core. This corresponds to sediments deposited since 1900, when mining activities started in the area. The enrichment of Cu, Pb and Zn is assumed to be mainly a result of mining, while Mn is apparently enriched in the surface due to migration of dissolved Mn and precipitation in the oxic surface layer. Elevated concentrations of As and Fe in the upper 4 cm are presumably due to discharges from a coke plant and an iron works respectively. The excess Hg present in the near surface sediments is tightly bound, either in coal particles or ore dust introduced by local industry, or via long distance transport of atmospheric particles. Calculations of metal flux to the sediments indicate an anthropogenic flux of Zn equal to its natural flux, while the flux of Pb shows a threefold increase above natural input.