A catalog of tsunamis in New Caledonia from 28 March 1875 to 30 September 2009

In order to establish a tsunami alert system in New Caledonia in April 2008, the French Secretary of State for Overseas Affairs, with the aid of the UNESCO French Commission, mandated an investigation to build a more complete record of the most recent tsunamis. To complete this task, a call for witnesses was broadcast through various media and in public locations. These witnesses were then interviewed onsite about the phenomenon they had observed. Previous witness reports that had been obtained in the last few years were also used. For the most recent events, various archives were consulted. In total, 18 events were documented, of which 12 had not been previously mentioned in past work. These results confirm an exposure to a hazard of: (1) local origin (the southern part of the Vanuatu arc) with a very short post-seismic delay (< 30 min) before the arrival of wave trains; (2) regional origin (Solomon Islands arc, northern part of the Vanuatu arc) with a delay of several hours; and (3) an exposure to trans-oceanic tsunamis (Kamchatka 1952, South Chile 1960, Kuril Islands 2006, North Tonga 2009), unknown until today. These results highlight the necessity for New Caledonia to adopt an alert system, coupled with ocean tide gauges, that liaises with the main alert system for the Pacific (Pacific Tsunami Warning Center), and brings to light the importance of establishing a prevention campaign.     

The stress field at Soultz-sous-Forêts from focal mechanisms of induced seismic events: Cases of the wells GPK2 and GPK3

The stress field at the EGS geothermal site of Soultz-sous-Forêts has been the subject of many studies, because it largely controls the response of the reservoir to fluid injection. The analysis of borehole logging data, especially breakouts and drilling-induced tension fractures, in the four geothermal wells define an average SHmax orientation ranging between 170° and 180° down to 5 km depth. It also reveals strong heterogeneities in several depth intervals. In this paper, the inversion of double-couple source mechanisms of seismic events induced during GPK2 and GPK3 stimulation tests is performed to retrieve the orientation and shape factor of the stress tensor, using the Slickenside Analysis Package of Michael, 1984, Michael, 1987a, Michael, 1987b. The results indicate a well-determined orientation of Shmin in GPK2 and in GPK3; in GPK3 Shmin is clockwise rotated by about 10°. The stress tensor defines an uniaxial extension. The results from both methods, analysis of borehole logging data and inversion of focal mechanisms, are only slightly different; the discrepancy may be due to the larger reservoir volume covered by the focal mechanisms, which can include strong stress heterogeneities.     

Derivation of detrital rutile in the Yaoundé region from the Neoproterozoic Pan-African belt in southern Cameroon (Central Africa)

Rutile, as an important component in alluvial or eluvial heavy mineral deposits, is known in southern Cameroon. These deposits are underlain by the Neoproterozoic low- to high-grade Yaoundé Group. Geochemical, thermometric, fluid inclusion and Pb isotopic studies of the rutile from alluvial and eluvial concentrates and from medium-grade micaschist from the nearby Yaoundé region permit the following conclusions: (1) alluvial and eluvial rutile of the Yaoundé region are derived from the degradation of metapelites, metamafic rocks and pegmatites of the nearby Yaoundé Group; (2) rutile in the Yaoundé Group formed during the Pan-African metamorphism, or was inherited as detrital rutile from a 900 Ma source. The study also shows that the rutile can be used to trace the history of the Pan-African belt north of the Congo craton.     

Identification of the Bloody Creek structure,a possible impact crater in southwestern Nova Scotia,Canada

Abstract— An approximately 0.4 km diameter elliptical structure formed in Devonian granite in southwestern Nova Scotia, herein named the Bloody Creek structure (BCS), is identified as a possible impact crater. Evidence for an impact origin is based on integrated geomorphic, geophysical, and petrographic data. A near‐continuous geomorphic rim and a 10 m deep crater that is infilled with lacustrine sediments and peat define the BCS. Ground penetrating radar shows that the crater has a depressed inner floor that is sharply ringed by a 1 m high buried scarp. Heterogeneous material under the floor, interpreted as deposits from collapse of the transient cavity walls, is overlain by stratified and faulted lacustrine and wetland sediments. Alteration features found only in rim rocks include common grain comminution, polymict lithic microbreccias, kink‐banded feldspar and biotite, single and multiple sets of closely spaced planar microstructures (PMs) in quartz and feldspar, and quartz mosaicism, rare reduced mineral birefringence, and chlorite showing plastic deformation and flow microtextures. Based on their form and crystallographic orientations, the quartz PMs consist of planar deformation features that document shock‐metamorphic pressures ≤25 GPa. The age of the BCS is not determined. The low depth to diameter ratio of the crater, coupled with anomalously high shock‐metamorphic pressures recorded at its exposed rim, may be a result of significant post‐impact erosion. Alternatively, impact onto glacier ice during the waning stages of Wisconsinian deglaciation (about 12 ka BP) may have resulted in dissipation of much impact energy into the ice, resulting in the present morphology of the BCS.     

Estimating greenhouse gas emissions from cattle raising in Brazil

The study estimated, for the first time, the greenhouse gas emissions associated with cattle raising in Brazil, focusing on the period from 2003 to 2008 and the three principal sources: 1) portion of deforestation resulting in pasture establishment and subsequent burning of felled vegetation; 2) pasture burning; and 3) bovine enteric fermentation. Deforestation for pasture establishment was only considered for the Amazon and Cerrado. Emissions from pasture burning and enteric fermentation were accounted for the entire country. The consolidated emissions estimate lies between approximately 813 Mt CO₂eq in 2008 (smallest value) and approximately 1,090 Mt CO₂eq in 2003 (greatest value). The total emissions associated with Amazon cattle ranching ranged from 499 to 775 Mt CO₂eq, that of the Cerrado from 229 to 231 Mt CO₂eq, and that of the rest of the country between 84 and 87 Mt CO₂eq. The full set of emissions originating from cattle raising is responsible for approximately half of all Brazilian emissions (estimated to be approximately 1,055 Mt CO₂eq in 2005), even without considering cattle related sources not explicitly estimated in this study, such as energy use for transport and refrigeration along the beef and derivatives supply chain. The potential for reduction of greenhouse gas emissions offered by the Brazilian cattle industry is very high and might constitute Brazil’s most important opportunity for emissions mitigation. The study offers a series of policy recommendations for mitigation that can be implemented by public and private administrators at a low cost relative to other greenhouse gas reduction options.     

Magmatic-dominated fluid evolution in the Jurassic Nambija gold skarn deposits (southeastern Ecuador)

The Jurassic (approximately 145 Ma) Nambija oxidized gold skarns are hosted by the Triassic volcanosedimentary Piuntza unit in the sub-Andean zone of southeastern Ecuador. The skarns consist dominantly of granditic garnet (Ad_20–98) with subordinate pyroxene (Di_46–92Hd_17–42Jo_0–19) and epidote and are spatially associated with porphyritic quartz-diorite to granodiorite intrusions. Endoskarn is developed at the intrusion margins and grades inwards into a potassic alteration zone. Exoskarn has an outer K- and Na-enriched zone in the volcanosedimentary unit. Gold mineralization is associated with the weakly developed retrograde alteration of the exoskarn and occurs mainly in sulfide-poor vugs and milky quartz veins and veinlets in association with hematite. Fluid inclusion data for the main part of the prograde stage indicate the coexistence of high-temperature (500°C to >600°C), high-salinity (up to 65 wt.% eq. NaCl), and moderate- to low-salinity aqueous-carbonic fluids interpreted to have been trapped at pressures around 100–120 MPa, corresponding to about 4-km depth. Lower-temperature (510–300°C) and moderate- to low-salinity (23–2 wt.% eq. NaCl) aqueous fluids are recorded in garnet and epidote of the end of the prograde stage. The microthermometric data (Th from 513°C to 318°C and salinity from 1.0 to 23 wt.% eq. NaCl) and δ¹⁸O values between 6.2‰ and 11.5‰ for gold-bearing milky quartz from the retrograde stage suggest that the ore-forming fluid was dominantly magmatic. Pressures during the early retrograde stage were in the range of 50–100 MPa, in line with the evidence for CO₂ effervescence and probable local boiling. The dominance of magmatic low-saline to moderately saline oxidizing fluids during the retrograde stage is consistent with the depth of the skarn system, which could have delayed the ingression of external fluids until relatively low temperatures were reached. The resulting low water-to-rock ratios explain the weak retrograde alteration and the compositional variability of chlorite, essentially controlled by host rock compositions. Gold was precipitated at this stage as a result of cooling and pH increase related to CO₂ effervescence, which both result in destabilization of gold-bearing chloride complexes. Significant ingression of external fluids took place after gold deposition only, as recorded by δ¹⁸O values of 0.4‰ to 6.2‰ for fluids depositing quartz (below 350°C) in sulfide-rich barren veins. Low-temperature (<300°C) meteoric fluids (δ¹⁸O_water between −10.0‰ and −2.0‰) are responsible for the precipitation of late comb quartz and calcite in cavities and veins and indicate mixing with cooler fluids of higher salinities (about 100°C and 25 wt.% eq. NaCl). The latter are similar to low-temperature fluids (202–74.5°C) with δ¹⁸O values of −0.5‰ to 3.1‰ and salinities in the range of 21.1 to 17.3 wt.% eq. CaCl₂, trapped in calcite of late veins and interpreted as basinal brines. Nambija represents a deep equivalent of the oxidized gold skarn class, the presence of CO₂ in the fluids being partly a consequence of the relatively deep setting at about 4-km depth. As in other Au-bearing skarn deposits, not only the prograde stage but also the gold-precipitating retrograde stage is dominated by fluids of magmatic origin.     

Attrition efficiency in the decontamination of stormwater sediments

The purpose of this research is to propose a laboratory method based on attrition and sieving for the treatment of runoff water sediments in the aim of developing a pilot unit. The attrition process serves to remove fine particles and pollutants from the surface of coarse stormwater sediment particles. In all cases, the efficiency of pollutant removal is dependent upon various parameters, including cutoff threshold, residence time, solid density, temperature and impeller speed. This article presents the optimization of these various parameters along with method efficiency; for this work, several sediments have been tested. The results indicate that an attrition scrubber may be effectively used to remediate contaminated sediment and that reuse is definitely possible. A model of the method will also be proposed to study the behavior of fine particles and pollutants.     

The oxidation state of sulfur in synthetic and natural glasses determined by X-ray absorption spectroscopy

Sulfur K-edge X-ray absorption near edge structure (XANES) spectra were recorded for experimental glasses of various compositions prepared at different oxygen fugacities (fO₂) in one-atmosphere gas-mixing experiments at 1400 °C. This sample preparation method only results in measurable S concentrations under either relatively reduced (log fO₂ < −9) or oxidised (log fO₂ > −2) conditions. The XANES spectra of the reduced samples are characterised by an absorption edge crest at 2476.4 eV, typical of S²⁻. In addition, spectra of Fe-bearing compositions exhibit a pronounced absorption edge shoulder. Spectra for all the Fe-free samples are essentially identical, as are the spectra for the Fe-bearing compositions, despite significant compositional variability within each group. The presence of a sulfide phase, such as might exsolve on cooling, can be inferred from a pre-edge feature at 2470.5 eV.The XANES spectra of the oxidised samples are characterised by an intense transition at 2482.1 eV, typical of the sulfate anion SO₄²⁻. Sulfite (SO₃²⁻) has negligible solubility in silicate melts at low pressures. The previous identification of sulfite species in natural glass samples is attributed to an artefact of the analysis (photoreduction of S⁶⁺). S⁴⁺ does, however, occur unambiguously with S⁶⁺ in Fe-free and Fe-poor compositions prepared in equilibrium with CaSO₄ at 4-16 kbar, and when buffered with Re/ReO₂ at 10 kbar. Solubility of S⁴⁺ thus requires partial pressures of SO₂ considerably in excess of 1 bar. A number of experiments were undertaken in an attempt to access intermediate fO₂s more applicable to terrestrial volcanism. Although these were largely unsuccessful, S²⁻ and S⁶⁺ were found to coexist in some samples that were not in equilibrium with the imposed fO₂.The XANES spectra of natural olivine-hosted melt inclusions and submarine glasses representative of basalts at, or close to, sulfide saturation show mainly dissolved S²⁻, but with minor sulfate, and additionally a peak at 2469.5 eV, which, although presumably due to immiscible sulfide, is 1 eV lower than that typical of FeS. These sulfate and sulfide-related peaks disappear with homogenisation of the inclusions by heating to 1200 °C followed by rapid quenching, suggesting that both these features are a result of cooling under natural conditions. The presence of small amounts of sulfate in otherwise reduced basaltic magmas may be explained by the electron exchange reaction: S²⁻ + 8Fe³⁺ = S⁶⁺ + 8Fe²⁺, which is expected to proceed strongly to the right with decreasing temperature. This reaction would explain why S²⁻ and S⁶⁺ are frequently found together despite the very limited fO₂ range over which they are thermodynamically predicted to coexist. The S XANES spectra of water-rich, highly oxidised, basaltic inclusions hosted in olivine from Etna and Stromboli confirm that nearly all S is dissolved as sulfate, explaining their relatively high S contents.     

Mercury isotope fractionation during liquid-vapor evaporation experiments

Liquid-vapor mercury isotope fractionation was investigated under equilibrium and dynamic conditions. Equilibrium evaporation experiments were performed in a closed glass system under atmospheric pressure between 0 and 22 °C, where vapor above the liquid was sampled at chemical equilibrium. Dynamic evaporation experiments were conducted in a closed glass system under 10⁻⁵ bar vacuum conditions varying (1) the fraction of liquid Hg evaporated at 22 °C and (2) the temperature of evaporation (22-100 °C). Both, residual liquid and condensed vapor fractions were analyzed using stannous chloride CV-MC-ICP-MS.Equilibrium evaporation showed a constant liquid-vapor fractionation factor (α_202/198) of 1.00086 ± 0.00022 (2SD, n = 6) within the 0-22 °C range. The 22 °C dynamic evaporations experiments displayed Rayleigh distillation fractionation behavior with liquid-vapor α_202/198 = 1.0067 ± 0.0011 (2SD), calculated from both residual and condensed vapor fractions. Our results confirm historical data (1920s) from Brönsted, Mulliken and coworkers on mercury isotopes separation using evaporation experiments, for which recalculated δ²⁰²Hg′ showed a liquid-vapor α_202/198 of 1.0076 ± 0.0017 (2SD). This liquid-vapor α_202/198 is significantly different from the expected kinetic α_202/198 value ((202/198)^0.5 = 1.0101). A conceptual evaporation model of back condensation fluxes within a thin layer at the liquid-vapor interface was used to explain this discrepancy. The δ²⁰²Hg′ of condensed vapor fractions in the 22-100 °C temperature range experiments showed a negative linear relationship with 10⁶/T², explained by increasing rates of exchange within the layer with the increase in temperature.Evaporation experiments also resulted in non-mass-dependent fractionation (NMF) of odd ¹⁹⁹Hg and ²⁰¹Hg isotopes, expressed as Δ¹⁹⁹Hg′ and Δ²⁰¹Hg′, the deviation in ‰ from the mass fractionation relationship with even isotopes. Liquid-vapor equilibrium yielded Δ¹⁹⁹Hg′/Δ²⁰¹Hg′ relationship of 2.0 ± 0.6 (2SE), which is statistically not different from the one predicted for the nuclear field shift effect (Δ¹⁹⁹Hg/Δ²⁰¹Hg ≈ 2.47). On the other hand, evaporation under dynamic conditions at 22 °C led to negative anomalies in the residual liquid fractions that are balanced by positive anomalies in condensed vapors with lower Δ¹⁹⁹Hg′/Δ²⁰¹Hg′ ratios of 1.2 ± 0.4 (2SD). This suggests that either magnetic isotope effects may have occurred without radical chemistry or an unknown NMF process on odd isotopes operated during liquid mercury evaporation.