Accuracy assessment of the Mexican National Forest Inventory map: A study in four ecogeographical areas

The accuracy of the Mexican National Forest Inventory (NFI) map is derived in four distinct ecogeographical areas, using an assessment design tailored for the project. A main achievement of the design was to integrate the high diversity of classes encompassed at the most detailed subcommunity level of the classification scheme within a cost‐controlled statistically sound assessment. A hybrid double sampling strategy was applied to the 2.5 million‐ha study area. A total of 5955 reference sites were verified against their NFI map label. The availability of detailed quasi‐synchronous reference data for the 2000 Landsat‐derived NFI and the high diversity of mapped classes allowed a careful thematic analysis on the selected regions, relevant for national extrapolation. Global accuracy estimates of 64–78 per cent were registered among the four ecogeographical areas (two with mainly temperate climate and the other two with mainly tropical climate), with the lower accuracy levels found in areas more densely covered with forests. According to the estimates, the NFI map tends to underestimate the presence of temperate forest (especially oak) and overestimate the presence of tropical forest in the areas investigated. The analysis of confusions reveals difficulties in unambiguously interpreting or labelling forests with secondary vegetation, herbaceous and/or shrub‐like vegetation as well as distinguishing between aquatic vegetation types. The design proved useful from the perspective of accuracy assessments of regional maps in biodiverse regions.     

New parameter for the assessment of blasting efficiency

The efficiency of a blast depends very widely on three groups of parameters: rock mass, blast geometrical parameters and energy distribution in space (borehole bottom, column energy) and time (delays between holes and rows). According to the expected results from a blast, there are several definitions for the term efficiency. The criterion for the block size reduction in the muck pile is often considered as important, because generally it has a great influence on the efficiency of all the operations after the blast. In this paper, a new parameter for the assessment of the blast efficiency is proposed, based on the relative comparison of area delimited by the Rosin-Rammler curves of the in situ rock mass and of the muck pile. This parameter is then compared to others previously established, namely the fragmentation index (Aler et al. 1996) and the surface energy ratio (Hamdi et al. 2001).     

Re-Os Isotopic Measurements at the Femtomole Level in Natural Samples

Here we describe a new chemical separation method for Os and an improved mass spectrometric procedure for Re and Os. This technique is based on the selective extraction of OsO₄ from aqueous solution in liquid bromine. Among other advantages, this procedure avoids the cumbersome distillation procedure for Os and uses only commercial "off the shelf" PFA teflon labware. Blank levels for 0.5 g sample sizes are: 0.06 pg and 0.5 pg for Os and Re respectively. Samples containing as little as 1 pg g⁻¹ Os can be analysed reliably with this method. Adaptation to other dissolution methods is also discussed.     

Determination of Rare Earth Elements, Sc, Y, Zr, Ba, Hf and Th in Geological Samples by ICP-MS after Tm Addition and Alkaline Fusion

We present a revised method for the determination of concentrations of rare earth (REE) and other trace elements (Y, Sc, Zr, Ba, Hf, Th) in geological samples. Our analytical procedure involves sample digestion using alkaline fusion (NaOH-Na₂O₂) after addition of a Tm spike, co-precipitation on iron hydroxides, and measurement by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS). The procedure was tested successfully for various rock types (i.e., basalt, ultramafic rock, sediment, soil, granite), including rocks with low trace element abundances (sub ng g⁻¹). Results obtained for a series of nine geological reference materials (BIR-1, BCR-2, UB-N, JP-1, AC-E, MA-N, MAG-1, GSMS-2, GSS-4) are in reasonable agreement with published working values.     

Review of the neotectonics of the Eastern Turkish–Armenian Plateau by geomorphic analysis of digital elevation model imagery

Digital elevation model (DEM) images provide synoptic views of the Earth’s surface allowing the analysis of landforms of still active tectonic and volcanic structures at regional scale. A DEM at 250 m pixel size constitutes regional scale data particularly efficient to investigate the late Miocene–Quaternary deformation of the Eastern Turkish–Armenian Plateau in the Arabian–Eurasian area of convergence. Geomorphic analysis of the DEM image associated with review of fault-plane solutions of earthquakes show that faults are mostly strike-slip with small vertical component. Here we show that the orientations of the tectonic and volcanic structures fit with a tectonic regime characterized by N–S shortening and E–W lengthening, consistent with westward escape of Anatolia perpendicular to the direction of the Arabia–Eurasia shortening. The uniform uplift of the plateau, the predominance of strike-slip faulting, the lack of major thrusts and the occurrence of normal faults do not support a model of going-on crustal thickening due to intracontinental convergence. On the contrary, our observations can be better interpreted in terms of lithospheric thinning and mantle upwelling related to gravity escape of Anatolia.     

Origin and evolution of 2 Ga old carbonatite complex (Ihouhaouene,Ahaggar, Algeria): Nd and Sr isotopic evidence

Associated syenitic rocks and carbonatites from Ihouhaouene, Algeria, have been investigated for their Sr and Nd isotope and trace element geochemistry. A zircon U-Pb emplacement age (1994 +22 -17 Ma) has been obtained from the carbonatites. The REE characteristics, among which the significant and approximately constant negative Eu anomaly and the evolution of (La/Ce)N and (Yb/Lu)N ratios which increase sympathetically with total REE abundances, are considered to be of purely magmatic origin. They are used to constrain the genetic links between syenites and carbonatites. Sr and Nd isotopes suggest a similar source for carbonatites and syenites, which is enriched compared to a chondritic reference: Nd(T)=-6.4 to -8.6 and ISr(T)=0.7097. These features are interpreted as evidence of contamination of a mantle-derived magmatic precursor by continental crust, occurring in a magmatic chamber.     

Holographic interferometry study of the dissolution and diffusion of gypsum in water

We have performed holographic interferometry measurements of the dissolution of the (0 1 0) plane of a cleaved gypsum single crystal in pure water. These experiments have provided the value of the dissolution rate constant k of gypsum in water and the value of the interdiffusion coefficient D of its aqueous species in water. D is 1.0 × 10⁻⁹ m² s⁻¹, a value close to the theoretical value generally used in dissolution studies. k is 4 × 10⁻⁵ mol m⁻² s⁻¹. It directly characterizes the microscopic transfer rate at the solid-liquid interface, and is not an averaged value deduced from quantities measured far from the surface as in macroscopic dissolution experiments. It is found to be two times lower than the value obtained from macroscopic experiments.     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.     

基于激光扫描和构造分析的紫云苗厅“双穹顶结构”成因机理初步研究

隶属于贵州格必（凸）河伏流洞穴系统的紫云苗厅,是世界上已知探明体积和表面积最大的洞厅,平面投影面积仅次于马来西亚的沙捞越大厅。2014年英国研究人员采用Riegl VZ-400三维激光扫描仪首次对整个苗厅进行了地面激光扫描,本研究通过激光扫描数据并结合地质构造背景分析,对苗厅基本形态特征及其控制因素获得了如下新认识：（1）苗厅整体由两个洞厅与一段大型廊道（极有可能是世界上跨度最大的洞穴廊道）共同构成,在形态上则是两个穹顶与一个拱顶相连接,总体呈“凹”字形。点云切片显示苗厅为鞍部（上部）水平截面呈两个独立又相互关联的多边形且底座并联的“双穹顶”特殊结构;（2）苗厅鞍部的多边形系多期地质构造错动所致,产生了不同方向、不同等级的断裂和节理体系,在区域内形成了具有格子状构造的格局,密集的裂隙交汇于苗厅使得溶蚀作用最为发育;（3）苗厅发育在交麻向斜核部下二叠厚层—块状石灰岩地层中,向斜底部的开张裂隙为地下水进入提供了良好的构造条件,是苗厅能发育成世界级巨大洞厅一个不可忽略的关键因素;（4）苗厅还存在上层洞道,与区域内的层状洞穴共同反映了地质历史时期构造抬升与河流下切的双重作用。推测早期有其它多股水流从高处共同汇聚于苗厅,共同掏蚀出巨大的地下空间,并经历了从潜流带到包气带的转换,才最终形成现今所见的宏大洞厅;（5）根据地貌形态与地质构造的关系,“双穹顶”的发育暗示了有利于形成超大地下洞厅的特殊地质构造也是相邻成对的。     

Analysis of boundary friction effect on the homogenization process of compacted bentonite/claystone mixture with technological voids upon hydration

Pre-compacted MX80 bentonite/Callovo-Oxfordian (COx) claystone mixture has been proposed to backfill and seal the underground galleries for radioactive waste disposal in France. While emplacing these pre-compacted blocks, technological voids are created between the blocks and the host rock and among the blocks themselves. It is expected that homogenization process will take place over time for the structure constructed with pre-compacted blocks upon hydration. This study investigated the boundary friction effect on such a process. Results showed that after the filling of technological voids, the soil far from the technological voids would swell further, while those near the voids would be compressed under the welling pressure generated by the soil behind, resulting in an increase in homogeneity in terms of dry density distribution. However, this homogenization process would stop after a certain time. Further examination showed that the homogenization process ended when the maximum boundary friction force became equal to or higher than the vector sum of swelling forces in the radial direction. Based on the force equilibrium and the mass conservation, the final dry density distribution was estimated. Comparison between the estimation and the measurement showed a good agreement, indicating the relevance of the identified mechanism related to boundary friction.