Glassy orthopyroxene granodiorites of the Pannonian Basin: tracers of ultra-high-temperature deep-crustal anatexis triggered by Tertiary basaltic volcanism

Glassy orthopyroxene granodiorite-tonalite (named pincinite after type locality) was described from basaltic lapilli tuffs of the Pliocene maar near Pinciná village in the Slovakian part of the Pannonian Basin. Two pincinite types exhibit a qualitatively similar mineral composition (quartz, An_20–55 plagioclase, intergranular silicic glass with orthopyroxene and ilmenite, ±K-feldspar), but strongly different redox potential and formation PT conditions. Peraluminous pincinite is reduced (6–7% of total iron as Fe³⁺ in corundum-normative intergranular dacitic glass) and contains ilmenite with 8–10 mol% Fe₂O₃ and orthopyroxene dominated by ferrosilite. High-density (up to 0.85 g/cm³) primary CO₂ inclusions with minor H₂, CH₄, H₂S, CO and N₂ (<2 mol% total) are present in Qtz and Plg. Equilibrium PT conditions inferred from the intergranular Opx–Ilm–Glass assemblage and fluid density correspond to 1,170±50°C, 5.6±0.4 kbar, respectively. Metaluminous pincinite is more oxidised (25–27% of total iron as Fe³⁺ in diopside-normative intergranular glass of rhyolite–trachyte–dacite composition) and contains Fe₂O₃-rich ilmenite (17–29 mol%) associated with enstatite. Fluid inclusions are composed of CO₂–H₂O mixtures with up to 38 mol% H₂O. Raman spectroscopy revealed H₂S along with dominant CO₂ in the carbonic phase. Equilibrium PT parameters for the intergranular Opx–Ilm–Glass assemblage correspond to 740±15°C, 2.8±0.1 kbar, respectively. Reducing gas species (<2 mol% total) in the CO₂-inclusions of the peraluminous pincinite resulted from hydrogen diffusion due to fH₂ gradient imposed during decrease of redox potential from the log fO₂ values near QFM during Qtz + Plg growth, to QFM-2 incidental to the superimposed Opx + Ilm assemblage in the intergranular melt. The decrease in oxygen fugacity was recorded also in the metaluminous pincinite, where log fO₂ values changed from ~QFM + 2.6 to QFM + 0.4, but hydrogen diffusion did not occur. Absence of OH-bearing minerals, major and trace element abundances (e.g. REE 300–320, Nb 55–57, Th 4–31, Zr 240–300 ppm, FeO_tot/MgO up to 11), and Sr–O isotope ratios in the pincinites are diagnostic of high-temperature anorogenic magmas originated by dehydration melting of biotite in quartz-feldspathoid crust (⁸⁷Sr/⁸⁶Sr>0.705–0.706, ¹⁸O>9 V-SMOW) around alkali basalt reservoir in depths between 17 and 20 km, and around late stage derivatives of the basalt fractionation, intruding the crust up to depths of 10–11 km. Low water activity in the pincinite parental melt was caused by CO₂-flux from the Tertiary basaltic reservoirs and intrusions. The anatexis leads to generation of a melt-depleted granulitic crust beneath the Pannonian Basin, and the pincinites are interpreted as equivalents of igneous charnockites and enderbites quenched at temperatures above solidus and unaffected by sub-solidus re-equilibration and metamorphic overprint.     

Neogene upper‐crustal cooling of the Olympus range (northern Aegean): major role of Hellenic back‐arc extension over propagation of the North Anatolia Fault Zone

The North Anatolian Fault Zone (NAFZ) is one of the most hazardous active faults on Earth, yet its Pliocene space‐time propagation across the north Aegean domain remains poorly constrained. We use low‐temperature multi‐thermochronology and inverse thermal modelling to quantify the cooling history of the upper crust across the Olympus range. This range is located in the footwall of a system of normal faults traditionally interpreted as resulting from superposed Middle–Late Miocene N–S stretching, related to the back‐arc extension of the Hellenic subduction zone, and a Pliocene‐Quaternary transtensional field, attributed to the south‐westward propagation of the NAFZ. We find that accelerated exhumational cooling occurred between 12 and 6 Ma at rates of 15–35 °C Ma^?1 and decreased to <3 °C Ma^?1 by 8–6 Ma. The absence of significant Plio‐Pleistocene cooling across Olympus suggests that crustal exhumation there is driven by late Miocene back‐arc extension, while the impact of the NAFZ remains limited.     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

Magnesium isotope systematics of the lithologically varied Moselle river basin, France

Magnesium and strontium isotope signatures were determined during different seasons for the main rivers of the Moselle basin, northeastern France. This small basin is remarkable for its well-constrained and varied lithology on a small distance scale, and this is reflected in river water Sr isotope compositions. Upstream, where the Moselle River drains silicate rocks of the Vosges mountains, waters are characterized by relatively high ⁸⁷Sr/⁸⁶Sr ratios (0.7128-0.7174). In contrast, downstream of the city of Epinal where the Moselle River flows through carbonates and evaporites of the Lorraine plateau, ⁸⁷Sr/⁸⁶Sr ratios are lower, down to 0.70824.Magnesium in river waters draining silicates is systematically depleted in heavy isotopes (δ²⁶Mg values range from −1.2 to −0.7‰) relative to the value presently estimated for the continental crust and a local diorite (−0.5‰). In comparison, δ²⁶Mg values measured in soil samples are higher (∼0.0‰). This suggests that Mg isotope fractionation occurs during mineral leaching and/or formation of secondary clay minerals. On the Lorraine plateau, tributaries draining marls, carbonates and evaporites are characterized by low Ca/Mg (1.5-3.2) and low Ca/Sr (80-400) when compared to local carbonate rocks (Ca/Mg = 29-59; Ca/Sr = 370-2200), similar to other rivers draining carbonates. The most likely cause of the Mg and Sr excesses in these rivers is early thermodynamic saturation of groundwater with calcite relative to magnesite and strontianite as groundwater chemistry progressively evolves in the aquifer. δ²⁶Mg of the dissolved phases of tributaries draining mainly carbonates and evaporites are relatively low and constant throughout the year (from −1.4‰ to −1.6‰ and from −1.2‰ to −1.4‰, respectively), within the range defined for the underlying rocks. Downstream of Epinal, the compositions of the Moselle River samples in a δ²⁶Mg vs. ⁸⁷Sr/⁸⁶Sr diagram can be explained by mixing curves between silicate, carbonate and evaporite waters, with a significant contribution from the Vosgian silicate lithologies (>70%). Temporal co-variation between δ²⁶Mg and ⁸⁷Sr/⁸⁶Sr for the Moselle River throughout year is also observed, and is consistent with a higher contribution from the Vosges mountains in winter, in terms of runoff and dissolved element flux. Overall, this study shows that Mg isotopes measured in waters, rocks and soils, coupled with other tracers such as Sr isotopes, could be used to better constrain riverine Mg sources, particularly if analytical uncertainties in Mg isotope measurements can be improved in order to perform more precise quantifications.     

HP–UHP metamorphism as an indicator of slab dip variations in the Alpine arc

HP/UHP and LT metamorphic units that commonly occur in the inner parts of mountain belts result from the subduction of continental and oceanic material, most often exhumed prior to continental collision. The prograde pressure–temperature history of HP–UHP rocks strongly depends on the convergence rate and on the subduction zone geometry. The maximum pressure recorded provides a proxy for the depth of shearing off and stacking of HP metamorphic nappes. A 2-D thermal model of continental subduction at lithospheric scale is used to compute the length and pressure peak of detached HP metamorphic units as a function of the slab dip angle and the convergence rate. Model results are applied to the metamorphic nappe pile of the inner Alps. A mean convergence rate of 1 cm/year during the subduction of the Briançonnais terrane is indicated by the paleogeographic reconstructions between 46 and 38 Ma. On this basis, the available petrological data and lengths of metamorphic units are used to compute the variations of the slab dip angle. The slab dip angle is shown to increase, from the northeast to the southwest, along the Alpine arc with estimated values of 20° for Suretta, 30–45° for Monte Rosa and Gran Paradiso, and 60° for Dora Maira. From Eocene to Oligocene times, the increase in slab dip angle is controlled by changes of buoyancy, due to the spatial configuration of the Valaisan trough and the incoming of crustal material within the subduction zone.     

Evidence of multiple evaporite recycling processes in a salt‐tectonic context,Sivas Basin,Turkey

The isotopic composition of evaporites can shed light on their environment of precipitation and their subsequent recycling processes. In this study, we performed Sr, O and S isotopic analyses on evaporitic sulphates in the halokinetic Sivas Basin. The main objectives were to decipher the age and origin of the evaporites responsible for the salt tectonics, and to test whether diapir dissolution acts as the source of younger evaporitic layers in continental mini‐basins. The Sr isotopes demonstrate that the first evaporites precipitated from seawater during the Middle–Late Eocene. The similar isotopic values measured in the halokinetic domain confirm that the Eocene evaporites triggered the salt tectonics and were continuously recycled in Oligo‐Miocene mini‐basins as lacustrine to sabkha evaporites. Modern halite precipitates suggest that the dissolution and recycling of diapiric halite is ongoing. This study demonstrates the efficiency of isotopic analyses in constraining evaporite recycling processes in continental halokinetic domains.     

Uplift rates of the Loyalty Islands as determined by 230Th234U dating of raised coral terraces

Uplift rates of the Loyalty Islands (S.W. Pacific) have been determined from ${}^{230}\text{Th}{}^{234}\text{U}$ dating of raised coral terraces standing 2 to 7.5 m above sea level. The ages of the terraces on Ouvéa and Lifou correspond closely to previously documented periods of high sea levels at 120,000 and 180,000 yr BP. A +2-m terrace on Beautemps-Beaupré is considered to be beyond the range of the dating technique. The uplift rates of the various islands show a decrease toward the west. This lends support to the hypothesis of a lithospheric bulge of the leading edge of the Australian plate prior to its subduction at the level of the New Hebrides trench.     

Some aspects of the tectonics of subduction zones

The main structures of a subduction zone are as follows.

1. (1) On the outer wall: faults, formed either by reactivation of the structural grain of the oceanic plate, when the latter is slightly oblique to the trench, or by a new fault network parallel to the trench, or both. The width of the faulted zone is about 50 miles.

2. (2) On the inner wall: either an accretionary prism or an extensional fault network, or both; collapsed structures and slumps are often associated, sometimes creating confusion with the accretionary structures.

3. (3) The overall structure of the trench itself is determined by the shape of the edge of the continental crust or of the island arc. Its detailed structure, however, is related to the oceanic plate, namely when the structural grain of the latter is slightly oblique to the trench, which then takes an “en echelon” form. Collapsed units can fill up the trench which is, in that case, restricted to an irregular narrow depression; the tectonic framework of the trench can be buried under a sedimentary blanket when the sedimentation rate is high and the trench bottom is a large, flat area.

Two extreme types of active margins can be distinguished: convergent compressive margins, when the accretionary mechanism is strongly active; and convergent extensional margins where the accretionary mechanism is absent or only weakly active.

The status of a given margin between these two extreme types is related to the convergence rate of the plates, the dip of the subduction zone, the sedimentation activity and the presence of a continental obstacle, because oceanic seamounts and aseismic ridges are easily subducted.

Examples are taken from the Barbados, Middle America, Peru, Kuril, Japan, Nankai, Marianna, Manila, New Hebredes and Tonga trenches.     

The fit of the continents around the North Atlantic Ocean

A new reassembly of the continents around the North Atlantic Ocean is presented. The first criterion used for this reassembly is the identification of the structural framework related to the opening which consists of marginal fracture zones generated by offsets of the Rift. The Africa—North America, Eurasia—Greenland, Greenland—North America and Eurasia—North America adjustments are successively discussed. It is argued that the adjustments are best made at the 3000-meters isobath between Africa and North America and at the 2000-meters isobath for the younger rifts. The difference is attributed to subsidence and modification of continental margins with time. The importance of the Late Paleozoic tectonic phase in determining the subsequent pattern of Mesozoic rifting is emphasized.     

Stress sensitivity of stylolite morphology

Stylolites are rough surfaces that form by localized stress-induced dissolution. Using a set of limestone rock samples collected at different depths from a vertical section in Cirque de Navacelles (France), we study the influence of the lithostatic stress on the stylolites morphology on the basis of a recent morphogenesis model. We measured the roughness of a series of bedding-parallel stylolites and show that their morphology exhibits a scaling invariance with two self-affine scaling regimes separated by a crossover-length (L) at the millimeter scale consistent with previous studies. The importance of the present contribution is to estimate the stylolite formation stress σ from the sample position in the stratigraphic series and compare it to the crossover-length L using the expected relationship: L ～ σ ^?2. We obtained a successful prediction of the crossover behavior and reasonable absolute stress magnitude estimates using relevant parameters: depth of stylolite formation between 300 to 600 m with corresponding normal stress in the range of 10–18 MPa. Accordingly, the stylolite morphology contains a signature of the stress field during formation and we thus suggest that stylolites could be used as paleo-stress gauges of deformation processes in the upper crust.