Validation of Jason and Envisat Altimeter Dual Frequency Rain Flags

New rain flags based on the dual frequency capabilities of the new Jason Poseidon-2 and Envisat RA2 altimeters have been tested, developed and adopted for the operational processing of the altimeter data. Their validation conducted during the calibration/validation phases of the satellites is presented here. The Jason flag is validated by comparison with the TOPEX one, using the Tandem mission. The results show a very good agreement between the two sensors and the two rain flags The Envisat flag is validated by comparison with both Jason and TOPEX using global and collocated data sets. The results show similar performances for the three sensors. The f relations estimated during the calibration-validation period and presented here have been given to the altimeter ground processing facilities for operational use.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Distribution and transfer of trace elements in the Western Mediterranean

Results concerning the concentration of cadmium and lead in Mediterranean waters collected during the 2nd PHYCEMED cruise (Oct. 1983) are discussed. Sampling has been performed at seven stations in the Western Mediterranean Basin, two in the Strait of Gibraltar and the near Atlantic, two in the Sicily Strait and the Eastern Basin.In the Western Basin the observations are in fair agreement with those of PHYCEMED 1. Cadmium has a fairly homogeneous distribution vertically as well as from one station to another, with an average concentration of 8 ng l⁻¹; while lead shows a slight but continuous decrease in concentrations with depth (from at least 50 ng l⁻¹ in surface waters to 20 or 25 ng l⁻¹ at depth). On the other hand, at the basin boundaries, where waters from different origins are present, vertical distributions appear very different. On the basis of calculated water budgets it can be estimated that the Mediterranean Sea discharges about 200 t y⁻¹ of cadmium and about 250 t y⁻¹ of lead into the Atlantic Ocean while 1000 t y⁻¹ of lead are transferred from the Western to the Eastern Basin.     

Nonparametric Estimates of the Sea State Bias for the Jason-1 Radar Altimeter

The Jason-1 sea state bias (SSB) is analyzed in depth from the first year of GDR products. Compared to previous missions, this work benefits from two aspects of the empirical determination of the SSB from the altimetric data themselves. First, from a methodological point of view, a nonparametric technique (NP) has been developed and largely tested on TOPEX/Poseidon 1, GFO and Envisat data. The NP estimator has proven to be a useful tool in the SSB estimation, and it is now mature enough to be used for a refined analysis. On the other hand, the SSB can be extracted from three different data sets (crossovers, collinear data, and residuals) with different characteristics. It is then possible to cross calibrate various estimations of the SSB models and to determine the most accurate one. A systematic comparison is made between these different estimates for the Jason-1 altimeter. The collinear and crossover data sets yield very similar estimates despite their difference of spatial and temporal distributions. These SSB models assure consistency with the TOPEX mission when comparing Jason-1 and TOPEX residuals during the tandem phase. Thanks to the present work, the impact of the short wavelengths filtering on the SSB estimation is evidenced. More generally, our understanding of potential errors affecting the sea surface height and their impact onto the SSB estimation is also improved.     

Propagation of the Southwest Indian Ridge at the Rodrigues Triple Junction

The analysis of multibeam bathymetric data of the Southwest Indian Ridge(SWIR) domain between the triple junction traces from 68° E to theRodrigues Triple Junction (RTJ; 70° E) reveals the evolution of thisridge since magnetic anomaly 4 (8 Ma). Image processing has been used toshow that the horizontal component of strain due to a network of normal stepfaults increases dramatically between 69°30 E and the RTJ. Thisarea close to the RTJ is characterized by a deep graben at the foot of thetriple junction trace on the African plate and by a narrow fault-boundedridge that joins an offset of the trace on the Antarctic plate. In thatarea, spreading is primarily amagmatic and dominated by tectonic extensionprocesses. To the west of 69°30 E, some lobate bathymetricfeatures atop of a large topographic high suggest volcanic constructions.Between 68°10 E and 69°25 E the southern flank of theSWIR domain is wider than the northern one and is characterized by a series of 7 en echelon bathymetric highs similar in size,shape and orientation to the one centred at 69°30E near the present-day triple junction. Their en echelon organization along the triple junction trace on the Antarctic plate and the typical lack of conjugated parts on the northern flank show that these bathymetric highs have been shifted to the south by successive northward relocalisations of the SWIR rifting zone. This evolution results in the asymmetric spreading of the SWIR in the survey area. The off-axis bathymetric highs connect to the offsets of the triple junction trace on the Antarctic plate when the Southeast Indian Ridges lightly lengthenstoward the northwest and the triple junction is relocated to the north. We propose that the SWIR lengthens toward the northeast with two propagation modes: 1) a continuous and progressive propagation with distributed deformation in preexisting crust of the Central Indian Ridge, 2) a discontinuous propagation with focusing of the deformation in a rift zone when the triple junction migrates rapidly to the north. The modes of propagation of the SWIR are related to different localisation and distribution of strain which are in turn controlled by changes of the triple junction configurations due to propagation, recession or a symmetric spreading on the Central and Southeast Indian Ridges.