Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

Flood Damage Reduction Program (FDRP) in Québec: Case Study of the Chaudiére River

This study presents the evolution of agreements between the governments of Canadaand Québec on flood damage reduction. In Québec, the implementation of a regulation about building in floodplains came about in 1983–1984. Today, this regulation takes the form of a policy called ``Policy of shores, littoral and floodplain protection'. Municipalities must adopt rules that concur with the principles of this policy.The Chaudiére River basin was selected for analysis of urban developmentduring the period following the application of building rules in flood-risk areas.Despite the ban on building in the strong current zone (0–20 year return periodflood zone), many buildings, essentially residential, have been erected in thiszone. These new constructions generally account for a low percentage of thetotal property value in the 0–100 year flooding area, but are legal since theyare connected to a water and sewage network that existed prior to the officialfloodplain regulation.Flood damage along the Chaudiére River will tend to increase for two reasons.Firstly, while respecting the policy mentioned above, sites are still available infloodplains for future development. Secondly, no structural flood protection workshave been erected in view of the fact they are only marginally profitable from anbenefit-cost point of view.     

Weather as a Chronic Hazard for Road Transportation in Canadian Cities

Inclement weather creates a chronic hazard for Canadian travellers. Past studies indicate that road collision rates increase during precipitation, although the magnitude of theincrease varies from study to study, partly as a result of variations in weather and driving conditions,but also because of differences in methods. The goal of the current study is to improve ourunderstanding of the links between weather and travel risk in mid-sized Canadian cities by using astandardized method for analyzing data from six cities with different climates: Halifax-Dartmouth,Ottawa, Québec, Hamilton, Waterloo Region, and Regina. The study has four interrelated objectives: (1) Toconduct a sensitivity analysis to determine the extent to which risk estimates vary depending onthe criteria used to define precipitation events and `normal' conditions; (2) To compare therelative risk of collision and injury during precipitation relative to `normal' conditions; (3) Todetermine the extent to which weather-related risks vary fordifferent Canadian cities; and (4) To explore any differences in collision characteristics between events and controls, especially as theyvary from city to city. Results are based on a matched-pair analysis, using six-hour time blocks over afour-year period, 1995 to 1998. Results indicate only modest sensitivity to the criteria used to define precipitation events and `normal' conditions. On average, precipitation is associated with a 75 percentincrease in traffic collisions and a 45 percent increase in related injuries, as compared to `normal'seasonal conditions, but risk levels vary depending on the characteristics of the weather event.Both sensitivity to specific weather conditions and weather-related accident profiles vary from city tocity in ways that are not easily explained.     

Preliminary Results from a New 157 nm Laser Ablation ICP-MS Instrument: New Opportunities in the Analysis of Solid Samples

Preliminary results are given from an excimer 157 nm laser ablation multiple-collector inductively coupled plasma-mass spectrometer (LA-MC-ICP-MS), used for the isotopic measurements of solid materials. Elements of geological interest with different volatilities such as Pb and U (e.g. zircon geochronology) and Cu and Zn (as examples of geochemical/biochemical tracers) were analysed. The range of ablation rates of 20-150 nm s^-1 enabled us to ablate the sample down to a depth of 45 μm for a 50 μm diameter pit. The Cu and Zn isotopic measurements gave values that were very stable with, on average, a 0.01 % standard error, comparable with that achieved in liquid mode measurements.     

Global thermal and dynamical perturbations due to Cretaceous mantle avalanche

The numerical models of mantle convection agree to depict avalanches behaviour according to the level of endothermicity of the spinel → perovskite phase change. Their potential effects on the global thermal and dynamical states of the mantle have been computed thanks to a numerical code, which takes into account both the 400-km exothermic and the 660-km endothermic phase changes. The cycle followed by the avalanches is: local layering, destabilization of the 660-km thermal layer, travelling and spreading on the core, and reappearing of the local layering. Therefore, mantle convection is characterized by quiet periods of partial layering embedded in catastrophic events. During the avalanche, the amplitude of the surface velocity is multiplied by two, which would imply an enhanced plate tectonic and ridge activities. The global thermal effects of the avalanche are compatible with a high mantle temperature and an acceleration of Earth's rotation during the Cretaceous. They also offer a coherent explanation to locate the origin of mantle plumes both within the CMB and just below the transition zone.     

Retrograde fluids in the Archean Shawmere anorthosite, Kapuskasing Structural Zone, Ontario, Canada

The Archean Shawmere anorthosite lies within the granulite facies portion of the Kapuskasing Structural Zone (KSZ), Ontario, and is crosscut by numerous linear alteration veins containing calcite + quartz ± dolomite ± zoisite ± clinozoisite ± margarite ±paragonite ± chlorite. These veins roughly parallel the trend of the Ivanhoe Lake Cataclastic Zone. Equilibria involving clinozoisite + margarite + quartz ± calcite ± plagioclase show that the vein minerals were stable at T < 600 °C, XCO₂ < 0.4 at P ≈ 6 kbar. The stabilities of margarite and paragonite in equilibrium with quartz are also consistent with T < 600 °C and XCO₂ < 0.4 at 6 kbar. Additional assemblages consisting of calcite + clinochlore + quartz + talc + margarite indicate T < 500 °C with XCO₂ > 0.9. Thus, vein formation, while clearly retrograde, spanned a range of temperatures, and fluid compositions evolved from H₂O-rich to CO₂-rich. The calcite in the retrograde veins has δ¹⁸O values that range from 8.4 to 11.2‰ (average = +9.7 ± 0.9‰) and δ¹³C values that range from −3.9 to −1.6‰ (average = −3.1 ± 0.6‰). These values indicate that the fluids from which calcite precipitated underwent extensive exchange with the anorthosite and other crustal lithologies. The fluids may have been initially derived either from devolatilization of metamorphic rocks or crystallization of igneous rocks in the adjacent Abitibi subprovince. Vein quartz contains CO₂-rich fluid inclusions (final melting T = −57.0 to −58.7 °C) that range in size from 5 to 17 μm. Measured homogenization temperatures (T h) range from −44.0 to 14.5 °C, however for most inclusions (46 of S1), T h = −44.0 to −21.1 °C (ρCO₂ ≈ 1.13 to 1.05 g/cm³). At 400 to 600 °C, these densities correspond to pressures of 3.5 to 7 kbar, which is the best estimate of pressures of vein formation. It has been argued that some high density CO₂-rich fluid inclusions found in the KSZ were formed during peak metamorphism and thus document the presence of a CO₂-rich fluid during peak granulite facies metamorphism (Rudnick et al. 1984). The association of high density CO₂-rich fluid inclusions with clearly retrograde veins documents the formation of similar composition and density inclusions after the peak of metamorphism. Thus, the coincidence of entrapment pressures calculated from fluid inclusion density measurements with peak metamorphic pressures alone should not be considered strong evidence for peak metamorphic inclusion entrapment. All fluid inclusion results are consistent with an initially semi-isobaric retrograde P–T path. Received: 2 April 1996 / Accepted: 15 November 1996     

Re-Os Isotopic Measurements at the Femtomole Level in Natural Samples

Here we describe a new chemical separation method for Os and an improved mass spectrometric procedure for Re and Os. This technique is based on the selective extraction of OsO₄ from aqueous solution in liquid bromine. Among other advantages, this procedure avoids the cumbersome distillation procedure for Os and uses only commercial "off the shelf" PFA teflon labware. Blank levels for 0.5 g sample sizes are: 0.06 pg and 0.5 pg for Os and Re respectively. Samples containing as little as 1 pg g⁻¹ Os can be analysed reliably with this method. Adaptation to other dissolution methods is also discussed.     

Exhumation during crustal folding in the Namche-Barwa syntaxis

Geological observation in the eastern end of the Himalaya shows that the Asia/India Suture is folded. Metamorphic rocks derived from India occur structurally below the suture, in the core of a regional antiform. Isotopic and fission track dating establish cooling-exhumation of rocks from c.30 km depth within the last 4 Myr. We argue that exhumation is caused by ～ 10 mm yr^-1 erosion coeval with crustal scale folding.     

Curvature analysis of triangulated surfaces in structural geology

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.