Spatial and seasonal variability of sediment accumulation potential through controlled flooding of the beels located in the polders of the Ganges-Brahmaputra-Meghna delta of Southwest Bangladesh

The Ganges-Brahmaputra-Meghna (GBM) delta plain within Bangladesh is one of the most vulnerable to relative sea level rise (RSLR) in the world especially under current anthropogenically modified (i.e., embanked) conditions. Tidal river management (TRM) as practiced in coastal regions of Bangladesh may provide an opportunity to combat RSLR by raising the land level through controlled sedimentation inside beels (depression within embanked polders) with re-opening of polders. To date, TRM has been applied to tide-dominated coastal regions, but the potential applicability of TRM for the beels within the polders of river-dominated and mixed flow (MF) regimes remains to be assessed. We apply a calibrated 2D numerical hydromorphodynamic model to quantify sediment deposition in a beel flooded through breaching of the polder dike under conditions of river-dominated, tide-dominated and MF regimes for different seasons and applying different regulation schemes for the flow into the beel. Simulation results show considerable seasonality in sediment deposition with largest deposition during the monsoon season. The potential of controlled flooding is highest in the tide-dominated region, where sediment accumulation can be up to 28 times higher than in the river-dominated region. Regulating flow into a beel increases trapping efficiency, but results in slightly lower total deposition than without regulation. We conclude that re-establishing flooding of the beel within the polder without regulating the flow into the beel through breaching of the polder dike is a promising strategy for the mixed and tide-dominated flow regions in the delta as the sediment accumulation can raise the land surface at a higher rate than RSLR and effective SLR (ESLR). In the more upstream river-dominated section of the delta, accumulation rates would be much lower, but the pressure of sea level rise on these areas is lower as well. Owing to the abundant availability of sediment, application of controlled flooding like TRM therefore provides an opportunity to counteract the impact of RSLR and ESLR by means of land raising, particularly along the tidal river reaches in the GBM delta.     

Analytical expressions to determine the isothermal compressibility tensor and the isobaric thermal expansion tensor for monoclinic crystals: application to determine the direction of maximum compressibility in jadeite

Expressions are presented to allow the simple determination of the magnitudes and directions of the principal axes for the isothermal compressibility tensor and the isobaric thermal expansion tensor for monoclinic crystals. The method is applied to re-evaluate the apparently contradictory results that have recently been obtained for the direction of maximum compressibility in jadeite. The term ‘unit strain’ to describe these second rank tensors is discouraged and the use of the representation quadric for visualisation of second rank tensors is recommended.     

Element signatures of subduction-zone fluids. An experimental study of the element partitioning (Dfluid/rock) of natural partly altered igneous rocks from the ODP drilling site 1,256

The trace element signatures of fluids were investigated by leaching experiments on natural samples of partly altered mafic igneous rocks recovered from the drilling site 1,256 of ODP Leg 206 on the Cocos plate (Central America). Experiments with ultrapure water were performed at 400 °C/0.4 GPa and 500 °C/0.7 GPa. Both fluids and residual solids were examined to obtain the partition coefficients (D^fluid/rock) of various trace elements. Element partition coefficients (D^fluid/rock) obtained at 500 °C/0.7 GPa are significantly lower compared to results obtained at 400 °C/0.4 GPa, which is in contrast to observations at higher pressures (2.2–6 GPa) and temperatures between 700 and 1,400 °C (Kessel et al. in Earth Planet Sci Lett 237: 873–892, 2005a; Spandler et al. in Chem Geol 239: 228–249, 2007). This finding may indicate a considerable pressure effect on the leaching processes and strongly divergent fluid–rock interactions in the upper part of a subduction zone at 0.4–0.7 GPa compared to deeper subduction areas with higher pressures. Furthermore, this may be interpreted as one of the earliest fractionation processes during the subduction of crustal material.     

Observations on the crystal structures of lueshite

Laboratory powder XRD patterns of the perovskite-group mineral lueshite from the type locality (Lueshe, Kivu, DRC) and pure NaNbO₃ demonstrate that lueshite does not adopt the same space group (Pbma; #57) as the synthetic compound. The crystal structures of lueshite (2 samples) from Lueshe, Mont Saint-Hilaire (Quebec, Canada) and Sallanlatvi (Kola, Russia) have been determined by single-crystal CCD X-ray diffraction. These room temperature X-ray data for all single-crystal samples can be satisfactorily refined in the orthorhombic space group Pbnm (#62). Cell dimensions, atomic coordinates of the atoms, bond lengths and octahedron tilt angles are given for four crystals. Conventional neutron diffraction patterns for Lueshe lueshite recorded over the temperature range 11–1,000 K confirm that lueshite does not adopt space group Pbma within these temperatures. Neutron diffraction indicates no phase changes on cooling from room temperature to 11 K. None of these neutron diffraction data give satisfactorily refinements but suggest that this is the space group Pbnm. Time-of-flight neutron diffraction patterns for Lueshe lueshite recorded from room temperature to 700 °C demonstrate phase transitions above 550 °C from Cmcm through P4/mbm to \(Pm\overline{3} m\) above 650 °C. Cell dimensions and atomic coordinates of the atoms are given for the three high-temperature phases. The room temperature to 400 °C structures cannot be satisfactorily resolved, and it is suggested that the lueshite at room temperature consists of domains of pinned metastable phases with orthorhombic and/or monoclinic structures. However, the sequence of high-temperature phase transitions observed is similar to those determined for synthetic NaTaO₃, suggesting that the equilibrated room temperature structure of lueshite is orthorhombic Pbnm.     

Advancing process‐based watershed hydrological research using near‐surface geophysics: a vision for,and review of,electrical and magnetic geophysical methods

We want to develop a dialogue between geophysicists and hydrologists interested in synergistically advancing process based watershed research. We identify recent advances in geophysical instrumentation, and provide a vision for the use of electrical and magnetic geophysical instrumentation in watershed scale hydrology. The focus of the paper is to identify instrumentation that could significantly advance this vision for geophysics and hydrology during the next 3–5 years. We acknowledge that this is one of a number of possible ways forward and seek only to offer a relatively narrow and achievable vision. The vision focuses on the measurement of geological structure and identification of flow paths using electrical and magnetic methods. The paper identifies instruments, provides examples of their use, and describes how synergy between measurement and modelling could be achieved. Of specific interest are the airborne systems that can cover large areas and are appropriate for watershed studies. Although airborne geophysics has been around for some time, only in the last few years have systems designed exclusively for hydrological applications begun to emerge. These systems, such as airborne electromagnetic (EM) and transient electromagnetic (TEM), could revolutionize hydrogeological interpretations. Our vision centers on developing nested and cross scale electrical and magnetic measurements that can be used to construct a three‐dimensional (3D) electrical or magnetic model of the subsurface in watersheds. The methodological framework assumes a ‘top down’ approach using airborne methods to identify the large scale, dominant architecture of the subsurface. We recognize that the integration of geophysical measurement methods, and data, into watershed process characterization and modelling can only be achieved through dialogue. Especially, through the development of partnerships between geophysicists and hydrologists, partnerships that explore how the application of geophysics can answer critical hydrological science questions, and conversely provide an understanding of the limitations of geophysical measurements and interpretation. Copyright © 2008 John Wiley & Sons, Ltd.     

Petroleum geoscience in Norden - exploration, production and organization

Offshore exploration in Norway and Denmark-in the North Sea, the Norwegian Sea and the Barents Sea-has involved drilling about 850 wildcat wells, resulting in about 300 oil and gas finds, of which 84 are fields with production. The recoverable resources of all these finds total about 65 billion barrels of oil equivalent. Almost all these hydrocarbons come from a Jurassic source and the main reservoirs and traps are Jurassic sandstones in fault blocks and Paleocene sandstones or Cretaceous chalks in gentle domes. The article describes four major fields-Ekofisk, Gullfaks, Ormen Lange and SnФhvitto illustrate some of the many challenges in developing and producing the hydrocarbons.
Elsewhere in Norden, there has been much less exploration. Drilling results have mostly been negative in mainland Sweden, onshore Denmark, onshore Svalbard and on- and offshore West Greenland. Minor oil finds have been made in Palaeozoic rocks in the Baltic Sea. The first wells have recently been drilled off the Faroe Islands, resulting in one discovery. No drilling has taken place on- or offshore East Greenland.
As a result of the hydrocarbon activities in Norway and Denmark, petroleum geoscience there has flourished, with 2000 geoscientists currently employed in the industry, many technical innovations made, a wealth of publically available information and a great increase in the understanding of the geology.     

The genus Pseudo-nitzschia (Bacillariophyceae) in New Zealand: analysis of the last decade's monitoring data

The diatom genus Pseudo-nitzschia blooms throughout New Zealand's coastal waters. More than a decade of monitoring data were analysed in this study and seasonality was a significant factor in the appearance of Pseudo-nitzschia blooms. Austral spring and summer were the main bloom periods, although there were regional differences. Between January 2000 and August 2011, 8.4% of 29,000 seawater samples analysed for Pseudo-nitzschia exceeded the voluntary trigger level for biotoxin testing (10×10⁴ cells l^?1), and these were analysed by fluorescent in situ hybridisation (FISH) assays. Pseudo-nitzschia fraudulenta and P. pseudodelicatissima (low domoic acid [DA] producers) were the dominant bloom formers throughout New Zealand (each contributing 25%) followed by the highly toxic P. australis (10%). Shellfish flesh testing for DA was triggered on 8477 occasions between 2000 and 2011, but no samples exceeded the regulatory limit (20 mg/kg); the maximum concentration was 13 mg/kg (Marlborough Sounds, mid-winter 2010).     

Fast lagrangian particle tracking in unstructured ocean model grids

Ocean Dynamics - Lagrangian particle tracking, based on currents derived from hydrodynamic models, is an important tool in quantifying bio-physical transports in the ocean. Particle tracking in the...