Effects of continuous flow centrifugation on measurements of trace elements in river water: intrinsic contamination and particle fragmentation

Continuous flow centrifugation (CFC) is a well‐established technique used in natural surface water studies to collect large amounts of suspended solids, thus allowing a broad spectrum of measurements. However, a potential contamination or changes in the particle size distribution during the centrifugation may restrain the use of CFC effluents for element analysis in the colloidal and dissolved fractions. In this paper we evaluate the possibility of using the effluent of a Westfalia centrifuge (type KA2‐06‐075, 9700 rpm) for such analysis. This evaluation is based on two laboratory experiments with deionized and tap water and two field experiments in rivers. Elemental concentration changes across the CFC were assessed from the CFC influent and effluent after a filtration at 0·45 µm. Significant increases were found, mainly in the field experiments at a high suspended solids level and a slightly acid pH. A hypothesis was made on the origin of these increases as a superposition of a centrifuge intrinsic contamination and a particle fragmentation effect. A numerical model based on elemental concentration measurements (inductively coupled plasma mass spectrometry) gave a particle fragmentation level of 0·55% (mass percentage of particles broken up into smaller fragments during centrifugation). In another experiment, a direct particle counting (single particle counter) shows an excess of particles smaller than 500 nm in the CFC effluent, corresponding to a fragmentation level of 0·11%. In consequence, the use of CFC effluent for element analysis is possible in low‐turbidity river or lake waters, but should be carefully considered in waters with high suspended matter contents. Copyright © 2006 John Wiley & Sons, Ltd.     

The Trace Telescope Point Spread Function for the 171 Å Filter

We perform an analysis of the TRACE telescope blur from EUV images. Theblur pattern is discussed in terms of the telescope point-spread function (PSF) for the 171 Å filter. The analysis performed consists of two steps. First, an initial shape for the PSF core is determined directly from TRACE EUV images. Second, the blind-deconvolution method is used for obtaining the final PSF shape. The PSF core peak is fitted by analytical functions to determine its parametric characteristics. The determined PSF includes the core central peak and peaks caused by diffraction effects inherent in TRACE EUV data. The diffraction portion of the PSF is studied theoretically in the Fraunhofer diffraction limit. The temperature dependence of the TRACE PSF shape is investigated for a selected temperature range. We also discuss general properties of the obtained PSF and its possible applications.     

Thermodynamics of selected solar flares as determined from the analysis of the spectra obtained with the RESIK instrument

The RESIK instrument is an X-ray spectrometer with bent crystals onboard the CORONAS-F satellite. It was used to observe the spectra of solar flares, active regions, and quiet corona. During the period of the instrument’s operation, many spectra were collected in four energy channels covering the wavelength range from 3.2 to 6.1 Å. For the present analysis, we selected solar flares of various X-ray classes (B, C, and M in the GOES notation), which were observed during moderate level of solar activity (from January to March 2003). The analysis of the RESIK spectra fulfilled with different techniques allowed us to determine the temperature, emission measure, and temperature distribution of the differential emission measure, as well as to examine their time variability.     

Measurements of biomarker levels in flounder (Platichthys flesus) and blue mussel (Mytilus trossulus) from the Gulf of Gdańsk (southern Baltic)

In the framework of the EU funded BEEP project a set of biomarkers, gross morphometric indices and tissue concentrations of selected organic pollutants were measured in flounder (Platichthys flesus) and mussels (Mytilus trossulus) collected twice a year (April and October) from three sites in the inner Gulf of Gdańsk between autumn 2001 and spring 2003. In flounder, seasonal differences in most biomarkers were observed, but no correlations with tissue pollutant levels could be found. In mussels, highly variable levels in biomarker responses were seen, but no clear seasonal or spatial trends, directly related to tissue concentrations, could be established. The observed biomarkers distribution the study sites are probably mostly caused by interannual, seasonal and individual variability and, in case of flounder, possibly by exchange of stocks between the sampling sites.     

Use of biliary PAH metabolites as a biomarker of pollution in fish from the Baltic Sea

During field campaigns of the BEEP project (Biological Effects of Environmental Pollution in Marine Coastal Ecosystems) in 2001-2002, metabolites of polycyclic aromatic hydrocarbons (PAHs) were determined in bile samples from three fish species, flounder (Platichthys flesus), perch (Perca fluviatilis) and eelpout (Zoarces viviparus), from four separate areas in the Baltic Sea. Two determination methods were applied: fixed wavelength fluorescence (FF) for pyrene-type metabolites and high-performance liquid chromatography with fluorescence detection (HPLC). There was a good correlation between the FF method and 1-OH pyrene determined by HPLC. Normalisation of the FF data for absorbance at 380 nm or bile protein concentrations greatly increased variance in one third and decreased it in two thirds of the cases and resulted in a loss of significant differences (protein normalisation) between the sampling stations, but normalisation of the HPLC data had little effect on the results. The biliary PAH metabolite content was usually higher in males than in females. In perch and eelpout the biliary PAH contents were at similar levels, whereas in flounder the levels were lower. The sampling areas arranged in decreasing order of biliary PAH contents were: Wismar Bay > Gulf of Gdansk > Lithuanian coast > Kvadofj?rden (reference area). It is concluded that FF with un-normalised data is a reliable and simple method for monitoring purposes and only one sex of a selected species should be used.     

A new design of the LAPS land surface scheme for use over and through heterogeneous and non-heterogeneous surfaces: Numerical simulations and tests

Numerical simulations and tests with the recently redesigned land–air parameterization scheme (LAPS) are presented. In all experiments, supported either by one-point micrometeorological, 1D or 3D simulations, the attention has been directed to: (1) comparison of simulation outputs, expressing the energy transfer over and through heterogeneous and non-heterogeneous surfaces, versus observations and (2) analysis of uncertainties occurring in the solution of the energy balance equation at the land–air interface. To check the proposed method for aggregation of albedo, “propagating hole” sensitivity tests with LAPS over a sandstone rock grid cell have been performed with the forcing meteorological data for July 17, 1999 in Baxter site, Philadelphia (USA). Micrometeorological and biophysical measurements from the surface experiments conducted over crops and apple orchard in Serbia, Poland, Austria and France were used to test the operation of LAPS in calculating surface fluxes and canopy environment temperatures within and above plant covers of different densities. In addition, sensitivity tests with single canopy covers over the Central Europe region and comparison against the observations taken from SYNOP data using 3D simulations were made. Validation of LAPS performances over a solid surface has been done by comparison of 2 m air temperature observations against 5-day simulations over the Sahara Desert rocky ground using 3D model. To examine how realistically the LAPS simulates surface processes over a heterogeneous surface, we compared the air temperature measured at 2 m and that predicted by the 1D model with the LAPS as the surface scheme. Finally, the scheme behaviour over urban surface was tested by runs over different parts of a hypothetical urban area. The corresponding 1D simulations were carried out with an imposed meteorological dataset collected during HAPEX-MOBILHY experiment at Caumont (France). The quantities predicted by the LAPS compare well with the observations and the various subcomponents of the scheme appear to operate realistically.     

X-ray spectrophotometer SphinX and particle spectrometer STEP-F of the satellite experiment CORONAS-PHOTON. Preliminary results of the joint data analysis

A joint analysis is carried out of data obtained with the help of the solar X-ray SphinX spectrophotometer and the electron and proton satellite telescope STEP-F in May 2009 in the course of the scientific space experiment CORONAS-PHOTON. In order to determine the energies and particle types, in the analysis of spectrophotometer records data are used on the intensities of electrons, protons, and secondary γ-radiation, obtained by the STEP-F telescope, which was located in close proximity to the SphinX spectrophotometer. The identical reaction of both instruments is noted at the intersection of regions of the Brazilian magnetic anomaly and the Earth’s radiation belts. It is shown that large area photodiodes, serving as sensors of the X-ray spectrometer, reliably record electron fluxes of low and intermediate energies, as well as fluxes of the secondary gamma radiation from construction materials of detector modules, the TESIS instrument complex, and the spacecraft itself. The dynamics of electron fluxes, recorded by the SphinX spectrophotometer in the vicinity of a weak geomagnetic storm, supplements the information about the processes of radial diffusion of electrons, which was studied using the STEP-F telescope.     

ECHOBASE—A portable geographic fishery research database system

A geographic fishery research database system (GFRDBS), called ECHOBASE, for storing and management of data on pelagic fish resources from acoustic surveys and catch samples, combined with environmental data in a geographic context, has been developed. The system constitutes a portable and inexpensive yet powerful tool for fishery research and environmental monitoring and provides on‐board data processing and mapping capabilities.

Data are acquired from an echosounder, echo signal processor, environmental profiler (CTD probe), and Global Positioning System (GPS) receiver. The electronic digitized maps (based on C‐MAP public format files) provide active on‐screen nautical charts.

The basic GFRDBS platform is a portable PC 486 machine, which is used as an on‐board data acquisition and processing tool running under MS Windows 3.1 operating environment. The system is designed around the Borland's PARADOX package, which provides a relational database for managing acoustic, catch, and environmental data. The ECHOBASE programs were written in Borland C ++ language as a Windows application.