Carbonaceous chondrites as analogs for the composition and alteration of Ceres

The mineralogy and geochemistry of Ceres, as constrained by Dawn's instruments, are broadly consistent with a carbonaceous chondrite (CM/CI) bulk composition. Differences explainable by Ceres’s more advanced alteration include the formation of Mg‐rich serpentine and ammoniated clay; a greater proportion of carbonate and lesser organic matter; amounts of magnetite, sulfide, and carbon that could act as spectral darkening agents; and partial fractionation of water ice and silicates in the interior and regolith. Ceres is not spectrally unique, but is similar to a few other C‐class asteroids, which may also have suffered extensive alteration. All these bodies are among the largest carbonaceous chondrite asteroids, and they orbit in the same part of the Main Belt. Thus, the degree of alteration is apparently related to the size of the body. Although the ammonia now incorporated into clay likely condensed in the outer nebula, we cannot presently determine whether Ceres itself formed in the outer solar system and migrated inward or was assembled within the Main Belt, along with other carbonaceous chondrite bodies.     

A satellite relative motion model including $$J_2$$ and $$J_3$$J3 via Vinti’s intermediary

Vinti’s potential is revisited for analytical propagation of the main satellite problem, this time in the context of relative motion. A particular version of Vinti’s spheroidal method is chosen that is valid for arbitrary elliptical orbits, encapsulating \(J_2\), \(J_3\), and generally a partial \(J_4\) in an orbit propagation theory without recourse to perturbation methods. As a child of Vinti’s solution, the proposed relative motion model inherits these properties. Furthermore, the problem is solved in oblate spheroidal elements, leading to large regions of validity for the linearization approximation. After offering several enhancements to Vinti’s solution, including boosts in accuracy and removal of some singularities, the proposed model is derived and subsequently reformulated so that Vinti’s solution is piecewise differentiable. While the model is valid for the critical inclination and nonsingular in the element space, singularities remain in the linear transformation from Earth-centered inertial coordinates to spheroidal elements when the eccentricity is zero or for nearly equatorial orbits. The new state transition matrix is evaluated against numerical solutions including the \(J_2\) through \(J_5\) terms for a wide range of chief orbits and separation distances. The solution is also compared with side-by-side simulations of the original Gim–Alfriend state transition matrix, which considers the \(J_2\) perturbation. Code for computing the resulting state transition matrix and associated reference frame and coordinate transformations is provided online as supplementary material.     

Ceres's global and localized mineralogical composition determined by Dawn's Visible and Infrared Spectrometer (VIR)

The Visible and Infrared Spectrometer (VIR) instrument on the Dawn mission observed Ceres’s surface at different spatial resolutions, revealing a nearly uniform global distribution of surface mineralogy. Clearly, Ceres experienced extensive water‐related processes and chemical differentiation. The surface is mainly composed of a dark component (carbon, magnetite?), Mg‐phyllosilicates, ammoniated clays, carbonates, and salts. The observed species suggest endogenous, global‐scale aqueous alteration. While mostly uniform at regional scale, Ceres’s surface shows small localized areas with different species and/or variations in abundances. Few local exposures of water ice are seen, especially at higher latitudes. Sodium carbonates have been identified in several areas on the surface, notably in Occator bright faculae. Organic matter has also been discovered in several places, most conspicuously in a large area close to the Ernutet crater. The observed mineralogies, with the presence of ammoniated species and sodium salts, have a strong resemblance to materials found on other bodies of the outer solar system, such as Enceladus. This poses some questions about the original material from which Ceres accreted, suggesting a colder environment for such material with respect to Ceres’s present position.     

Mineralogy and temperature of crater Haulani on Ceres

We investigate the region of crater Haulani on Ceres with an emphasis on mineralogy as inferred from data obtained by Dawn's Visible InfraRed mapping spectrometer (VIR), combined with multispectral image products from the Dawn Framing Camera (FC) so as to enable a clear correlation with specific geologic features. Haulani, which is one of the youngest craters on Ceres, exhibits a peculiar “blue” visible to near‐infrared spectral slope, and has distinct color properties as seen in multispectral composite images. In this paper, we investigate a number of spectral indices: reflectance; spectral slopes; abundance of Mg‐bearing and NH₄‐bearing phyllosilicates; nature and abundance of carbonates, which are diagnostic of the overall crater mineralogy; plus a temperature map that highlights the major thermal anomaly found on Ceres. In addition, for the first time we quantify the abundances of several spectral endmembers by using VIR data obtained at the highest pixel resolution (~0.1 km). The overall picture we get from all these evidences, in particular the abundance of Na‐ and hydrous Na‐carbonates at specific locations, confirms the young age of Haulani from a mineralogical viewpoint, and suggests that the dehydration of Na‐carbonates in the anhydrous form Na₂CO₃ may be still ongoing.     

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.     

Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns

Abstract

This study examined the end-of-winter snow storage, its distribution and the spatial and temporal melt patterns of a large, low gradient wetland at Polar Bear Pass, Bathurst Island, Nunavut, Canada. The project utilized a combination of field observations and a physically-based snowmelt model. Topography and wind were the major controls on snow distribution in the region, and snow was routinely scoured from the hilltop regions and deposited into hillslopes and valleys. Timing and duration of snowmelt at Polar Bear Pass were similar in 2008 and 2009. The snowmelt was initiated by an increase in air temperature and net radiation receipt. Inter-annual variability in spatial snowmelt patterns was evident at Polar Bear Pass and was attributed to a non-uniform snow cover distribution and local microclimate conditions. In situ field studies and modelling remain important in High Arctic regions for assessing wetland water budgets and runoff, in addition to model parameterization and validation of satellite imagery.

Editor Z.W. Kundzewicz

Citation Assini, J. and Young, K.L., 2012. Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns. Hydrological Sciences Journal, 57 (4), 738–755.     

Detrital zircon geochronology of Palaeozoic Novaya Zemlya – a key to understanding the basement of the Barents Shelf

The Novaya Zemlya fold‐and‐thrust‐belt is the northern continuation of the late Palaeozoic Uralide Orogen. Little is known about its deeper structure and the basement history of the adjacent Barents and Kara shelves. Based on geological evidence and detrital zircon analysis of 28 samples from the northeastern and stratigraphically deepest part of the archipelago, we demonstrate that Cambro‐Ordovician turbidite‐dominated deposition was almost exclusively sourced from rocks consolidated during the Timanian orogeny (Timanian basement). A profound change in provenance occurred near the end of the Ordovician. Over 90% of the zircons from Silurian and about 80% from Devonian strata have ages characteristic of the Sveconorwegian Orogen, implying uplift of these rocks in the vicinity of Novaya Zemlya. The presence of Sveconorwegian and Grenvillian rocks in the high Arctic suggests revision of recent reconstructions of the Rodinia supercontinent, its break‐up and subsequent Caledonian orogeny.     

Jari: A pulp plantation in the Brazilian Amazon

Jari plantation is the largest pulp growing operation in the humid tropics, and occupies about 1000 sqkm previously covered by tropical forest. A study of five sites at Jari in 1980 indicated declining soil fertility, and low productivity of pulpwood. Low pulp production at Jari was caused by several factors, one of which appeared to be low soil fertility. The sams sites were re-evaluated in 1987. There was no discernable trend in either nutrients or productivity since 1980.Although productivity and nutrient stocks may have stabilized, low profitability caused by low pulp production resulted in the sale of Jari in 1982, for a $ 720 million loss. Despite growth rates at Jari which were too low to produce a profit on original investment, another plantation is planned for the eastern Amazon which is 10 times the size of Jari.     

Reaction progress during mylonitization of basaltic dikes along the Särv thrust,Swedish Caledonides

The mylonite zone at the base of the Särv thrust sheet, Swedish Caledonides, contains diabase dikes which record intense deformation and syntectonic greenschist facies metamorphism. An angular shear strain of 100 is calculated for a single dike which can be followed for 50 m in the mylonite zone and abundant centimeter thick greenschist layers imply shear strains in excess of 1000. This extraordinary amount of deformation is comparable to the largest strains attained during experimental superplastic deformation of metals and alloys and, by analogy, suggests that dike deformation was macroscopically superplastic. The progress of five syntectonic reactions was measured as a function of increasing strain for the continuously exposed dike in order to assess the contribution of reactionenhanced ductility and fluid-rock interactions to strain localization along the thrust. Reaction progress calculations suggest that the breakdown of amphibole to form weaker phyllosilicates (which are added to the incompetent matrix fraction) is the important strain softening mechanism below 100. The ultimate tectonite is a stable biotite-epidote schist comprised of a uniformly fine grain size (< 200 m), constant grain shapes and strain free grains. Below 40, metamorphism was isochemical and shear strain was independent of H₂O in the reactions. Petrologic fluid:rock ratios are low and suggest that deformation could have occurred under relatively dry conditions.Deformation micromechanisms were probably dominated by diffusive mass transfer processes throughout the life of the shear zone. The absence of cataclasis and the fine grain size of the protolith basalt suggest that fluids were introduced via grain boundary diffusion. Incongruent pressure solution at low strains and K-metasomatism above 40 also support diffusional flow. Diffusion-accomodated grain boundary sliding is thought to be the dominant micromechanism once the stable biotite-epidote tectonite forms.     

Lightning fatalities in Australia, 1824–1991

Information on fatalities from lightning strikes has been extracted from a specially compiled database on natural hazards in Australia. Records dating from 1803–1991 indicate that at least 650 persons have been killed by lightning strikes. Maps and charts show the percentages of victims with respect to age, sex, locality, activity, and other circumstances of the strike. The majority of the 650 fatalities recorded have occurred along the more populous southeastern coast. The overall death rate, from 1910–1989, is 0.08 per 100 000 population. The annual number of lightning fatalities has decreased with time, from a death rate of 0.21 in 1910–1919 to 0.01 in 1980–1989. This trend is more pronounced when population figures are taken into account. The group that has been most at risk in Australia is that of males aged 15–19, followed by males aged 20–34. The male:female ratio of victims has decreased with time but is not approaching equality, being 11.6 in 1910–1919 and 5.3 in 1980–1989. The diurnal and monthly occurrences of lightning fatalities peak at 12.00–18.00 hours and November-February respectively. About 86% of fatalities have occurred outdoors and 14% have occurred indoors. Approximately three-fifths of fatalities have been work-related, and the group of workers that has traditionally been most at risk is that of land-workers. Approximately one-fifth of fatalities have been recreation-related, although this proportion has been increasing with time. The recreational activities of water sports, golf, and cricket have had the greatest number of lightning fatalities. Comparisons are made between these data and the results of other similar studies, both in Australia and overseas.