Zonal-Harmonics Perturbations

A recently developed iterative technique for solving the perturbed Kepler problem is explained, in a step-by-step detail, using the simple example of oblateness perturbations. The results are then extended to deal with higher-degree zonal harmonics.     

Sources of Inaccuracy in Boron Isotope Measurement Using LA-MC-ICP-MS

Laser ablation multi-collector-inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS) has become a valuable tool for the in situ measurement of the boron isotope composition of geological samples at high (tens to hundreds of μm) spatial resolution. That said, this application suffers from significant analytical challenges. We focus in this study on the underlying processes of two of the main causes for inaccuracies using this technique. We provide empirical evidence that not only Ca ions (Sadekov et al. 2019, Standish et al. 2019, Evans et al. 2021) but also Ar ions, that are reflected within the flight tube of the mass spectrometer, are the source for previously reported issues with spectral baselines. We also address the impact of plasma conditions on the instrumental mass fractionation as a source for matrix- and mass-load-related analytical biases. Comparing experimental data with the results of a dedicated release and diffusion model (RDM) we estimate that a close to complete (~ 97%) release of boron from the sample aerosol is needed to allow for consistently accurate LA boron isotope measurement results without the need for corrections.     

Vegetation and peat accumulation steer Holocene tidal–fluvial basin filling and overbank sedimentation along the Old Rhine River,The Netherlands

In the transformation from tidal systems to freshwater coastal landscapes, plants act as eco-engineering species that reduce hydrodynamics and trap sediment, but nature and timing of the mechanisms of land creation along estuaries remains unclear. This article focuses on the Old Rhine estuary (The Netherlands) to show the importance of vegetation in coastal landscape evolution, predominantly regarding tidal basin filling and overbank morphology. This estuary hosted the main outflow channel of the river Rhine between ca 6500 to 2000 cal bp , and was constrained by peat during most of its existence. This study reconstructs its geological evolution, by correlating newly integrated geological data and new field records to varying conditions. Numerical modelling was performed to test the inferred mechanisms. It was found that floodbasin vegetation and resulting organic accumulation strongly accelerated back-barrier infill, by minimizing tidal influence. After tidal and wave transport had already sufficiently filled the back-barrier basin, reed rapidly expanded from its edges under brackish conditions, as shown by diatom analysis and datings. Reed growth provided a positive infilling feedback by reducing tidal flow and tidal prism, accelerating basin infilling. New radiocarbon dates show that large-scale crevassing along the Old Rhine River – driven by tidal backwater effect – only started as nutrient-rich river water transformed the floodbasin into an Alder carr in a next phase of estuary evolution. Such less dense vegetation promotes crevassing as sediments are more easily transported into the floodbasin. As river discharge increased and estuary mouth infilling progressed, crevasse activity diminished around 3800 to 3000 cal bp , likely due to a reduced tidal backwater effect. The insights from this data-rich Holocene study showcase the dominant role that vegetation may have in the long-term evolution of coastal wetlands. It provides clues for effective use of vegetation in vulnerable wetland landscapes to steer sedimentation patterns to strategically adapt to rising water levels.     

Compression Behaviour of Chlef Sand and Transition of Fines Content Using Pressure-Dependent Maximum Void Ratios of Sand

Geotechnical and Geological Engineering - This paper presents a study on Chlef sand to examine the effect of fines content (Fc), relative density (RD) and initial conditions on the compressibility...     

Spalling Experiments on Large Hard Rock Specimens

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.     

Comparison of volumetric and remote sensing methods (TLS) for assessing the development of a permanent forested loess gully

The gully systems develop a compact network dissecting the loess cover of the NW part of the Lublin Upland. They are overgrown by dense and multi-storey forest assemblages. It is very difficult to apply teledetection techniques, GPS positioning, and geodesic tools, such as a laser rangefinder or total station, for monitoring of gully development. The detailed research, involving the comparison of traditional and modern methods, was conducted in a gully with a secondary erosional dissection, developing in the gully bottom with varied intensity for the last 15 years. In the period of comparative research (2012/2013), the rate of development of the erosional dissection was measured by means of traditional methods as well as a Leica HDS 7000 laser scanner. 3D laser scanning permitted precise terrain modelling and the assessment of qualitative and quantitative spatial changes. This paper compares the results of three measurement campaigns. The analysis showed intensive development of the dissection, manifested in an increase in its volume (37 %), retreat of the erosion scarp (32 m), deep erosion (19 %), and lateral erosion (27 %). Registered moderate snowmelt in 2013 caused the volume dissection to increase by 57 m³, mainly as a result of the gully bottom scouring. During heavy rainfalls in June, the landforms were widened by a further 217 m³ and observed deepening and widening of erosive potholes. The prevalence of deep erosion resulted in the transformation back into a V-shaped cross section. A total of 37.3 Mg km⁻² of material was discharged from the gully catchment during snowmelt runoffs in 2013. A precipitation event in June 2013 caused the discharge of 856.9 Mg km⁻² of material from the catchment. The obtained results confirm that snowmelt erosion determines the spatial development of perennial gullies, but the volume of material discharged from the catchment depends on the occurrence of extreme precipitation during the warm season.

     

Lithospheric Electrical Structure across the Eastern Segment of the Altyn Tagh Fault on the Northern Margin of the Tibetan Plateau

Project INDEPTH (InterNational DEep Profiling of Tibet and the Himalaya) is an interdisciplinary program designed to develop a better understanding of deep structures and mechanics of the Tibetan Plateau. As a component of magnetotelluric (MT) work in the 4th phase of the project, MT data were collected along a profile that crosses the eastern segment of the Altyn Tagh fault on the northern margin of the plateau. Time series data processing used robust algorithms to give high quality responses. Dimensionality analysis showed that 2D approach is only valid for the northern section of the profile. Consequently, 2D inversions were only conducted for the northern section, and 3D inversions were conducted on MT data from the whole profile. From the 2D inversion model, the eastern segment of the Altyn Tagh fault only appears as a crustal structure, which suggests accommodation of strike slip motion along the Altyn Tagh fault by thrusting within the Qilian block. A large-scale off-profile conductor within the mid-lower crust of the Qilian block was revealed from the 3D inversion model, which is probably correlated with the North Qaidam thrust belt. Furthermore, the unconnected conductors from the 3D inversion model indicate that deformations in the study area are generally localized.