A Spatially-Analytical Scheme for Surface Temperatures and Conductive Heat Fluxes in Urban Canopy Models

In the urban environment, surface temperatures and conductive heat fluxes through solid media (roofs, walls, roads and vegetated surfaces) are of paramount importance for the comfort of residents (indoors) and for microclimatic conditions (outdoors). Fully discrete numerical methods are currently used to model heat transfer in these solid media in parametrisations of built surfaces commonly used in weather prediction models. These discrete methods usually use finite difference schemes in both space and time. We propose a spatially-analytical scheme where the temperature field and conductive heat fluxes are solved analytically in space. Spurious numerical oscillations due to temperature discontinuities at the sublayer interfaces can be avoided since the method does not involve spatial discretisation. The proposed method is compared to the fully discrete method for a test case of one-dimensional heat conduction with sinusoidal forcing. Subsequently, the analytical scheme is incorporated into the offline version of the current urban canopy model (UCM) used in the Weather Research and Forecasting model and the new UCM is validated against field measurements using a wireless sensor network and other supporting measurements over a suburban area under real-world conditions. Results of the comparison clearly show the advantage of the proposed scheme over the fully discrete model, particularly for more complicated cases.     

Are we adapting to climate change?

Human systems will have to adapt to climate change. Understanding of the magnitude of the adaptation challenge at a global scale, however, is incomplete, constrained by a limited understanding of if and how adaptation is taking place. Here we develop and apply a methodology to track and characterize adaptation action; we apply these methods to the peer-reviewed, English-language literature. Our results challenge a number of common assumptions about adaptation while supporting others: (1) Considerable research on adaptation has been conducted yet the majority of studies report on vulnerability assessments and natural systems (or intentions to act), not adaptation actions. (2) Climate change is rarely the sole or primary motivator for adaptation action. (3) Extreme events are important adaptation stimuli across regions. (4) Proactive adaptation is the most commonly reported adaptive response, particularly in developed nations. (5) Adaptation action is more frequently reported in developed nations, with middle income countries underrepresented and low-income regions dominated by reports from a small number of countries. (6) There is limited reporting on adaptations being developed to take advantage of climate change or focusing on women, elderly, or children.     

High-resolution subtropical summer precipitation derived from dynamical downscaling of the NCEP/DOE reanalysis: how much small-scale information is added by a regional model?

This study assesses the regional-scale summer precipitation produced by the dynamical downscaling of analyzed large-scale fields. The main goal of this study is to investigate how much the regional model adds smaller scale precipitation information that the large-scale fields do not resolve. The modeling region for this study covers the southeastern United States (Florida, Georgia, Alabama, South Carolina, and North Carolina) where the summer climate is subtropical in nature, with a heavy influence of regional-scale convection. The coarse resolution (2.5° latitude/longitude) large-scale atmospheric variables from the National Center for Environmental Prediction (NCEP)/DOE reanalysis (R2) are downscaled using the NCEP/Environmental Climate Prediction Center regional spectral model (RSM) to produce precipitation at 20?km resolution for 16 summer seasons (1990?C2005). The RSM produces realistic details in the regional summer precipitation at 20?km resolution. Compared to R2, the RSM-produced monthly precipitation shows better agreement with observations. There is a reduced wet bias and a more realistic spatial pattern of the precipitation climatology compared with the interpolated R2 values. The root mean square errors of the monthly R2 precipitation are reduced over 93% (1,697) of all the grid points in the five states (1,821). The temporal correlation also improves over 92% (1,675) of all grid points such that the domain-averaged correlation increases from 0.38 (R2) to 0.55 (RSM). The RSM accurately reproduces the first two observed eigenmodes, compared with the R2 product for which the second mode is not properly reproduced. The spatial patterns for wet versus dry summer years are also successfully simulated in RSM. For shorter time scales, the RSM resolves heavy rainfall events and their frequency better than R2. Correlation and categorical classification (above/near/below average) for the monthly frequency of heavy precipitation days is also significantly improved by the RSM.     

Fisheries mismanagement

We analysed the extent to which European politicians have adhered to scientific recommendations on annual total allowable catches (TACs) from 1987 to 2011, covering most of the period of the Common Fisheries Policy (CFP). For the 11 stocks examined, TACs were set higher than scientific recommendations in 68% of decisions. Politically-adjusted TACs averaged 33% above scientifically recommended levels. There was no evidence that the 2002 reform of the CFP improved decision-making, as was claimed at the time. We modelled the effects of such politically-driven decision-making on stock sustainability. Our results suggest that political adjustment of scientific recommendations dramatically increases the probability of a stock collapsing within 40 years.In 2012 European fisheries policy will undergo a once-a-decade reform. Ten years ago radical reforms were promised but the changes failed to improve sustainability. It is likely that the 2012 reform will be similarly ineffective unless decision-making is changed so that catch allocations are based on science rather than politics.     

Sedimentary Deposits from the 17 July 2006 Western Java Tsunami,Indonesia: Use of Grain Size Analyses to Assess Tsunami Flow Depth,Speed, and Traction Carpet Characteristics

The 2006 western Java tsunami deposited a discontinuous sheet of sand up to 20 cm thick, flooded coastal southern Java to a depth of at least 8 m and inundated up to 1 km inland. In most places the primarily heavy mineral sand sheet is normally graded, and in some it contains complex internal stratigraphy. Structures within the sand sheet probably record the passage of up to two individual waves, a point noted in eyewitness accounts. We studied the 2006 tsunami deposits in detail along a flow parallel transect about 750 m long, 15 km east of Cilacap. The tsunami deposit first becomes discernable from the underlying sediment 70 m from the shoreline. From 75 to 300 m inland the deposit has been laid down in rice paddies, and maintains a thickness of 10–20 cm. Landward of 300 m the deposit thins dramatically, reaching 1 mm by 450 m inland. From 450 m to the edge of deposition (around 700 m inland) the deposit remains <1 mm thick. Deposition generally attended inundation—along the transect, the tsunami deposited sand to within about 40 m of the inundation limit. The thicker part of the deposit contains primarily sand indistinguishable from that found on the beach 3 weeks after the event, but after about 450 m (and roughly coinciding with the decrease in thickness) the tsunami sediment shifts to become more like the underlying paddy soil than the beach sand. Grain sizes within the deposit tend to fine upward and landward, although overall upward fining takes place in two discrete pulses, with an initial section of inverse grading followed by a section of normal grading. The two inversely graded sections are also density graded, with denser grains at the base, and less dense grains at the top. The two normally graded sections show no trends in density. The inversely graded sections show high density sediment to the base and become less dense upward and represents traction carpet flows at the base of the tsunami. These are suggestive of high shear rates in the flow. Because of the grain sorting in the traction carpet, the landward-fining trends usually seen in tsunami deposits are masked, although lateral changes of mean sediment grain size along the transect do show overall landward fining, with more variation as the deposit tapers off. The deposit is also thicker in the more seaward portions than would be produced by tsunamis lacking traction carpets.     

Proximate environmental drivers of coral communities at Palmyra Atoll: establishing baselines prior to removing a WWII military causeway

A management proposal aims to partly remove a WWII military causeway at Palmyra Atoll to improve lagoon water circulation and alleviate sedimentation stress on the southeast backreef, an area of high coral cover and diversity. This action could result in a shift in sedimentation across reef sites. To provide management advice, we quantified the proximate environmental factors driving scleractinian coral cover and community patterns at Palmyra. The proportion of fine sedimentation was the optimal predictor of coral cover and changes in community structure, explaining 23.7% and 24.7% of the variation between sites, respectively. Scleractinian coral cover was negatively correlated with increases in fine sedimentation. Removing the causeway could negatively affect the Montipora corals that dominate the western reef terrace, as this genus was negatively correlated with levels of fine sedimentation. The tolerance limits of corals, and sediment re-distribution patterns, should be determined prior to complete removal of the causeway.     

Challenges of using electrical resistivity method to locate karst conduits—A field case in the Inner Bluegrass Region, Kentucky

Conduits serve as major pathways for groundwater flow in karst aquifers. Locating them from the surface, however, is one of the most challenging tasks in karst research. Geophysical methods are often deployed to help locate voids by mapping variations of physical properties of the subsurface. Conduits can cause significant contrasts of some physical properties that can be detected; other subsurface features such as water-bearing fractures often yield similar contrasts, which are difficult to distinguish from the effects of the conduits. This study used electrical resistivity method to search for an unmapped karst conduit that recharges Royal Spring in the Inner Bluegrass karst region, Kentucky, USA. Three types of resistivity techniques (surface 2D survey, quasi-3D survey, and time-lapse survey) were used to map and characterize resistivity anomalies. Some of the major anomalies were selected as drilling targets to verify the existence of the conduits. Drilling near an anomaly identified by an electrical resistivity profile resulted in successful penetration of a major water-filled conduit. The drilling results also suggest that, in this study area, low resistivity anomalies in general are associated with water-bearing features. However, differences in the anomaly signals between the water-filled conduit and other water-bearing features such as water-filled fracture zones were undistinguishable. The electrical resistivity method is useful in conduit detection by providing potential drilling targets. Knowledge of geology and hydrogeology about the site and professional judgment also played important roles in locating the major conduit.     

Analyses of the warm season rainfall climatology of the northeastern US using regional climate model simulations and radar rainfall fields

We examine the warm season (April-September) rainfall climatology of the northeastern US through analyses of high-resolution radar rainfall fields from the Hydro-NEXRAD system and regional climate model simulations using the weather research and forecasting (WRF) model. Analyses center on the 5-year period from 2003 to 2007 and the study area includes the New York-New Jersey metropolitan region covered by radar rainfall fields from the Fort Dix, NJ WSR-88D. The objective of this study is to develop and test tools for examining rainfall climatology, with a special focus on heavy rainfall. An additional emphasis is on rainfall climatology in regions of complex terrain, like the northeastern US, which is characterized by land-water boundaries, large heterogeneity in land use and cover, and mountainous terrain in the western portion of the region. We develop a 5-year record of warm season radar rainfall fields for the study region using the Hydro-NEXRAD system. We perform regional downscaling simulations for the 5-year study period using the WRF model. Radar rainfall fields are used to characterize the interannual, seasonal and diurnal variation of rainfall over the study region and to examine spatial heterogeneity of rainfall. Regional climate model simulations are characterized by a wet bias in the rainfall fields, with the largest bias in the high-elevation regions of the model domain. We show that model simulations capture broad features of the interannual, seasonal, and diurnal variation of rainfall. Model simulations do not capture spatial gradients in radar rainfall fields around the New York metropolitan region and land-water boundaries to the east. The model climatology of convective available potential energy (CAPE) is used to interpret the regional distribution of warm season rainfall and the seasonal and diurnal variability of rainfall. We use hydrologic and meteorological observations from July 2007 to examine the interactions of land surface processes and rainfall from a regional perspective.     

Water Level Monitoring Pressure Transducers—A Need for Industry‐Wide Standards

There are currently no industry‐wide standards for the calibration and specification of water‐level monitoring pressure transducers. Consequently, specifications from different manufacturers are currently not directly comparable, and different branded sensors may not perform similarly under the same environmental conditions. This has been highlighted by the varied performance of 14 leading brands of pressure transducers under test conditions. In laboratory tests, transducers generally met product accuracy specifications, although temperature compensation was substandard in five absolute sensors. In a 99‐day field test, accuracy was typically within around ±10 mm for lower range pressure sensors, which exceeded some product specifications. Furthermore, there was evidence for linear and curved forms of instrument drift. As a result of the diverse performance of the transducers, it is recommended that an industry‐wide standard for calibration and specification is introduced. This would eliminate any uncertainty surrounding the current procedures and lead to more informed procurement by the user who would have a greater understanding of comparative instrument performance. Any new standard should also address sensor drift which is currently rarely cited in product specifications.