Composition of plagioclase and associated minerals in some schists from Vermont,U.S.A., and South Westland,New Zealand,with inferences about the peristerite solvus

Two suites of regionally metamorphosed semi-pelitic schists were studied in order to investigate the paragenesis of low temperature plagioclase, from which something may be inferred as to the nature of the peristerite solvus at the temperatures and pressures of formation of these rocks: one from the Gile Mountain Formation in the Hanover and Mt. Cube quadrangles, eastern Vermont, U.S.A.; the other from the Alpine schists along the Haast River, South Westland, New Zealand. Plagioclase, muscovite, biotite, chlorite, carbonate, and garnet compositions were determined with an ARL EMX electron probe microanalyzer. The variation in plagioclase composition with increasing grade in the Vermont schists suggests that the peristerite solvus is asymmetrical with a near vertical albite-rich side and a sloping oligoclase-rich side. The top of the solvus appears to lie slightly above the temperature expressed by the almandine isograd in these schists. The compositions of the coexisting albite and oligoclase in the New Zealand rocks suggest a lower geothermal gradient than in Vermont, creating a different pattern of variation in plagioclase composition. Distribution diagrams of Mg, Ti, and Al^IV for muscovite-biotite and chlorite-biotite pairs in both suites of rocks support the hypothesis that the plagioclase relations observed represent equilibrium.     

The CMEKF Method for Sub-Sea Pipeline Monitoring and Leak Detection

1 .IntroductionIdentificationofaleakingflowlinerepresentsaspecialchallengetoboththeoilandgasindustryandregulators .While ,historically ,thenumberofcasesofshallowwaterreleasefromflowlinesisex tremelysmall,deepwaterflowlinesoperateunderconditionsrarelyencounteredinpreviousdevelopmentschemes .Theremotenessofthedeepwaterpipeline ,coupledwithanumberofcomplexinteractionsbe tweenthereleasedfluidsandthedeepwaterenvironment,effectivelyeliminatesmostexternaldetectionmethods (Scott,1 999) .Thecauseoflea…     

Analytical Solutions to the Flow Field Induced by Uniformly Moving Multiple Helical Vortex Filaments

This paper presents analytic solutions for the flow field of inviscid fluid induced by uniformly and rigidly moving multiple helical vortex filaments in a cylindrical pipe. The relative coordinate system is set on the moving vortex filaments. The analytical solutions of the flow field are obtained on the assumption that the relative velocity field induced is time-independent and helically symmetrical. If the radius of the cylindrical pipe approaches infinity, these solutions are also available for tmbounded space. The results show that both the absolute velocity field and pressure field are periodical in time, and may reduce to time-independent when the helical vortex filaments are immobile or slip along the filaments themselves. Furthermore, the solution of velocity field is reduced to Okulov‘s formula for the case of a single static vortex filament in a cylindrical pipe. The calculated locations of pressure peak and valley on the pipe wall agree with experimental results.     

A 2D Mathematical Model for Sediment Transport by Waves and Tidal Currents

In this study, the combined actions of waves and tidal currents in estuarine and coastal areas are considered and a 2D mathematical model for sediment transport by waves and tidal currents has been established in orthogonal curvilinear coordinates. Non-equilibrium transport equations of suspended load and bed load are used in the model. The concept of background concentration is introduced, and the formula of sediment transport capacity of tidal currents for the Oujiang River estuary is obtained. The Dou Guoren formula is employed for the sediment transport capacity of waves. Sediment transport capacity in the form of mud and the intensity of back silting are calculated by use of Luo Zaosen＇ s formula. The calculated tidal stages are in good agreement with the field data, and the calculated velocities and flow directions of 46 vertical lines for 8 cross sections are also in good agreement with the measured data. On such a basis, simulations of back silting after excavation of the waterway with a sand bar under complicated boundary conditions in the navigation channel induced by suspended load, bed load and mud by waves and tidal currents are discussed.     

Velocity and Sediment Concentration Profiles in Sediment-Laden Flows

A theoretical analysis of velocity profiles in sediment-laden flows is presented by means of Prandtl-Karman mixing length theorem. The study shows that the upward velocity of liquid-phase caused by settling sediment leads to the invalidity of the log-law and Rouse equation. The theoretical analysis takes into account the upward velocity and shows: 1) the mean velocity in sediment-laden flows follows the log-law, but the Karman constant reduces in the main flow region, 2) sediment concentration reduces the mixing length of fluid particles, 3) flow resistance reduces with the presence of sediment concentration, and 4) the sediment concentration profile deviates from the well know Rouse equation. The experimental data agree well with the equations derived on the basis of non-zero wall velocity. It is found that the wall-normal velocity should not be neglected for density gradient flows because it induces more than for pure water flows.     

Micropalaeontological record of Holocene estuarine and marine stages in the Corgo do Porto rivulet (Mira River, SW Portugal)

The Corgo do Porto is a small tributary of the Mira River, outleting 3.5 km upstream of its mouth. The valley is flat-floored due to terrigenous siltation and forms an alluvial plain reclaimed for agriculture/aquaculture. These conditions were quite distinct in the recent past because of extensive marine flooding of this area during the high-rate positive eustatism that followed the Last Glacial Maximum. The Holocene sedimentary column registers changes imposed by several forcing factors, mainly the climate-driven sea-level rise. As part of a multidisciplinary study, the sedimentological and micropalaeontological (benthic foraminifera and calcareous nannofossils) contents of a core taken from this infill were analyzed, and five different stages were distinguished within its environmental evolution: Stage A (prior to 10,000 cal yrs BP) consists of muddy, matrix-supported sand with abundant pebbles, barren of microfossils, and free of carbonates and organic matter that represents a fluvial environment contemporaneous of a low sea level. Between 10,000 and circa 4000 cal yrs BP the sediment is made of homogeneous mud, with bioclasts and organic matter. However, the assemblages of foraminifera and calcareous nannoplankton allowed the identification of several environmental stages, defining a cycle of increasing–decreasing marine influence inside the valley: brackish and brackish-marine sedimentation (Stage B), full-marine sedimentation (Stage C) and a return to brackish-marine sedimentation (Stage D). The final part of the core is barren of microfossils (Stage E) and it represents the modern sedimentation in the area with an accreting alluvial plain. This Holocene sedimentary sequence reflects an evolutionary succession that closely agrees with the palaeoenvironmental model previously presented by the authors elsewhere for the south-western Portuguese coast, where a change in the rate of sea-level rise has been recorded at around 5500 cal yrs BP when a very effective sandy barrier formed and isolated restricted brackish to fresh-water lagoonal environments from the open sea.     

fCO2 variability at the CARIACO tropical coastal upwelling time series station

Monthly seawater pH and alkalinity measurements were collected between January 1996 and December 2000 at 10°30′N, 64°40′W as part of the CARIACO (CArbon Retention In A Colored Ocean) oceanographic time series. One key objective of CARIACO is to study temporal variability in Total CO₂ (TCO₂) concentrations and CO₂ fugacity (fCO₂) at this tropical coastal wind-driven upwelling site. Between 1996 and 2000, the difference between atmospheric and surface ocean CO₂ concentrations ranged from about − 64.3 to + 62.3 μatm. Physical and biochemical factors, specifically upwelling, temperature, primary production, and TCO₂ concentrations interacted to control temporal variations in fCO₂. Air–sea CO₂ fluxes were typically depressed (0 to + 10 mmol C m^{− 2} day^{− 1}) in the first few months of the year during upwelling. Fluxes were higher during June–November (+ 10 to 20 mmol C m^{− 2} day^{− 1}). Fluxes were generally independent of the slight changes in salinity normally seen at the station, but low positive flux values were seen in the second half of 1999 during a period of anomalously heavy rains and land-derived runoff. During the 5 years of monthly data examined, only two episodes of negative air–sea CO₂ flux were observed. These occurred during short but intense upwelling events in March 1997 (−10 mmol C m^{− 2} day^{− 1}) and March 1998 (− 50 mmol C m^{− 2} day^{− 1}). Therefore, the Cariaco Basin generally acted as a source of CO₂ to the atmosphere in spite of primary productivity in excess of between 300 and 600 g C m^{− 2} year^{− 1}.     

Silting in the Lower Courses of Tidal Sluices in China

Serious sediment deposition often occurs after the construction of tidal sluices in snrall or medium-sized tidal muddy estuaries, so desilting or dredging is needed to meet the demands of flood diseharge, saltwater retaining, and navigation in those areas. In this paper, the problem of sediment deposition induced by construction of tidal sluices is analyzed.Different problems of silting near tidal sluices for different types of estuaries are summed up. at the same time, corresponding methods are given to solve these probleras, and a few successful examples are also given. The idea of comprehensive regulation and utilization of estuaries is put forward, and some proposals for solution of sediment deposition in this kind of estuaries are made.     

Limits of warm and cold bioclimatic stress in different climatic regions

Summary Limits of warm and cold stress in different climatic regions are determined by means of temperature, wind speed and humidity for the period 1976–1985. These values are measured at 2 PM local time during July for warm stress and at 7 AM local time during January for cold stress. Hvar (20 m ASL) is used to represent maritime climate, Zavian on the top of Mount Velebit (1594 m ASL) and Skrad (668 m ASL) in Gorski Kotar are representative of mountainous climate, and Zagreb (128 m ASL) is representative of continental low-land climate. Values of a biometeorological Temperature-Wind Speed-Humidity (TWH)-index higher than the 98% value of the theoretical distribution fitted to empirical data represent above normal extreme conditions at a given location, and TWH values less than 2% value of the theoretical distribution represent below normal extreme conditions. For similar temperatures, it will be extremely above normal at the top of Mount Velebit (Zavian) whilst normal on the coast (Hvar), and similarly, it will be extremely below normal in Hvar but normal at Zavian.With 4 Figures     

Stress indications in the Bohemian Massif: Reinterpretation of borehole televiewer data

Summary This paper presents the first results of stress determinations in the Bohemian Massif utilizing televiewer data from deeper boreholes. The televiewer survey was originally carried out by Geological Survey Ostrava for the purpose of studying fractures and bedding in coal basins to depths of 2 km. A reinterpretation of the amplitude logs reveal a large number of stress-induced borehole elongations (breakouts) which occur in a direction perpendicular to the maximum horizontal principal stress (S_H). The breakout analysis in the Upper Silesian, Meno and Kladno Basins indicates a dominant NW-SE direction of S_H which is consistent with the pattern of stress orientation in Western Europe. The NE-SW trend observed in the Plze Basin is less reliable. A model for stress magnitude determinations is formulated as a linear programming problem. If the a priori information on rock strength properties is limited, it reduces to explicit formulas for stress regime estimates. The model is applied to data from the Upper Silesian Basin for which a compressional stress regime is derived.