Seasonal variation of the soil seed bank of grasses in central Argentina as related to grazing and shrub cover

The objectives of this research were to (a) study seasonal variation of the seed bank of grasses in two areas with different grazing history, (b) analyse the effect of the presence of shrubs on the seed bank and (c) study seed viability and dormancy in buried seeds of Piptochaetium napostaense and Stipa tenuis. The seed density of grasses was in general low and showed seasonal variation. Most of the grasses showed maximum seed density in December when seed dispersal occurs. Shrub cover did not show a marked influence in seed accumulation. The relatively high number of damaged seeds suggests that predation may be an important factor in seed bank dynamics in the Caldenal. Seeds of dominant perennial forage grasses showed dormancy that could explain, at least in part, persistence of these species in spite of periodical disturbance.     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

A bilinear approximation of the surface relief in terrain correction computations

A new method is presented for the computation of the gravitational attraction of topographic masses when their height information is given on a regular grid. It is shown that the representation of the terrain relief by means of a bilinear surface not only offers a serious alternative to the polyhedra modeling, but also approaches even more smoothly the continuous reality. Inserting a bilinear approximation into the known scheme of deriving closed analytical expressions for the potential and its first-order derivatives for an arbitrarily shaped polyhedron leads to a one-dimensional integration with – apparently – no analytical solution. However, due to the high degree of smoothness of the integrand function, the numerical computation of this integral is very efficient. Numerical tests using synthetic data and a densely sampled digital terrain model in the Bavarian Alps prove that the new method is comparable to or even faster than a terrain modeling using polyhedra.     

The Influence of Geomorphologic Heritage on Present Nival Erosion: Peñalara, Spain

This article examines how snow plays a role in current erosive processes in a high mountain area (1800—2400 m a.s.l.) known as Peñalara, located in Spain's Central Range (40°50' N; 3°58' W). The hypothesis maintains that snow becomes an important erosive factor when it accumulates over sedimentary or weathered materials, therefore geomorphological heritage is a key factor in nival erosion. To test this hypothesis, the authors identified the landforms in the study area and determined their relative ages by weathering and lichenometry ( Rizocarpon geographicum ag. ), differentiating between preglacial, glacial (Recent Pleistocene) and postglacial (Holocene) forms. The information was used to plot a reticulate pattern of observation sites for the study area. Snow depth and the movement of selected blocks at each site were recorded from October 1991 to June 1995. The relationship between late-lying snowpatches, geomorphological heritage and current erosive processes was determined. Between 1800 and 2000 m a.s.l., there is an indirect relationship between snowpatches and predominant processes (stream incision and gelifluction) on terminal moraines. Between 2000 and 2200 m, direct action is present where there are late-laying snowpatches on lateral moraines and some glacial steps. Between 2200 and 2400 m, gelifraction and gravity processes are also in direct relation to snowpatches.     

Croatia — a coastal and maritime country

Croatia, through its geographic position, is a Mediterranean/Adriatic and Central European/Danube state. As an Adriatic coastal state, it has a long maritime tradition, which is apparent in its well-developed shipping (2.4 million GT), the high-quality ship-building industry (among the top six in the world) and through its numerous sea ports, of which many were established in ancient times. The leading national port is Rijeka, which is at the same time an important transit port for Austria, Hungary, Slovakia and the Czech Republic.The exceptionally indented Croatian Adriatic coast with its attractive archipelagos and favorable climatic and oceanographic conditions in the coastal sea offers very advantageous conditions for comprehensive tourist utilization. This is particularly true of nautical tourism, which is complimented by a larger number of constructed and well-equipped yachting ports/marinas on the coast and islands.     

The Carpatho-Balkanides and adjacent area: a sector of the Tethyan Eurasian metallogenic belt

The Tethyan Eurasian metallogenic belt (TEMB) was formed during Mesozoic and post-Mesozoic times in the area of the former Tethyan ocean on the southern margin of Eurasia, with the Afro-Arabian and Indian plates to the south. It extends from western Mediterranean via the Alps and southeastern Europe through the Lesser Caucasus, the Hindu Kush, and the Tibet Plateau to Burma and SW Indonesia, linking with the West Pacific metallogenic belt. The Carpatho-Balkan region is one of the sectors of the TEMB, characterized by some specific features. The emplacement of ore deposits is related to a definite time interval, and to specific tectonic settings such as: 1. Late Permian-Triassic intracontinental rifting along the northern margin of Gondwanaland and/or fragments already separated. This setting involves volcanogenic and volcano-sedimentary deposits (iron, lead/zinc, manganese, antimony, mercury, barite), skarn deposits associated with volcano-plutonic complexes of bimodal magmatism, and low temperature carbonate-hosted lead/zinc deposits. 2. Jurassic intraoceanic rifting – ophiolite complexes: This setting hosts major magmatic (particularly podiform chrome deposits) and volcano-sedimentary deposits, mainly of the Cyprus type. 3. Subduction-related setting involves porphyry copper deposits, lesser skarn deposits (iron, locally Pb-Zn), massive sulphide Cu (e.g. Bor) accompanied locally by Pb-Zn of replacement type, epithermal gold deposits, associated with calc-alkaline igneous complexes of the Early Tertiary-Late Cretaceous, and the Neogene gold/silver and base metals deposits. 4. Post-collision continent-continent setting includes deposits of Pb-Zn, Sb, As, Au-Cu associated with volcano-plutonic complexes of calc-alkaline affinity. Several major Alpine metallogenic units are developed in the Carpatho-Balkanides and adjacent area, each characterized by specific development, mineral associations, and types of ore deposits. Received: 3 June 1996 / Accepted: 10 January 1997     

Converting Radial Distortions Due to Geopotential Models to Geopotential Stokes Coefficients

A methodology for improving geopotential models has been developed. Theoretical relations have been derived converting coefficients in harmonic expansions for radial distortions due to geopotential models into geopotential Stokes coefficients. Terms of the order of 10 ^–10 in magnitude have been retained.     

GRASS GIS-embedded Decision Support Framework for Flood Simulation and Forecasting

This study presents a spatiotemporal analysis tool, called Shyska. This tool allows the simulation and prediction of flash floods in semiarid basins. Shyska has been developed by Geographical Information System (GIS)‐embedded functions, allowing the integration of hydrometeorological information from modern technologies of data acquisition in real time. A Digital Elevation Model (DEM) is used in order to obtain the relevant parameters from the integrated rainfall‐runoff models. Some of its most relevant modules and methodology employed for its development are described. Case studies in basins of south‐east Spain illustrate the applicability of the proposed techniques.     

Seismic studies of the Brasília fold belt at the western border of the São Francisco Craton, Central Brazil, using receiver function, surface-wave dispersion and teleseismic tomography

The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.     

An approach for quantifying geomorphological impacts for EIA of transportation infrastructures: a case study in northern Spain

A methodological proposal for the assessment of impacts due to linear infrastructures such as motorways, railways, etc. is presented. The approach proposed includes a series of specific issues to be addressed for each geomorphological feature analysed—both ‘static’ and ‘dynamic’—as well as a series of steps to be followed in the process.Geomorphic characteristics potentially affected were initially identified on the basis of a conceptual activities/impacts model that helps to single out geomorphic impacts related to environmental concerns for the area. The following issues were addressed for each individual impact: nature of potential effects; indicators that can be used to measure impacts; criteria of ‘geomorphologic performance’; procedure for measurement/prediction of changes; translation of geomorphologic impacts into significant terms from the viewpoint of human concerns; possible mitigation and/or compensation measures.The procedure has been applied to a case study corresponding to a new motorway in the Basque Country, northern Spain. Geomorphological impacts considered in this analysis included: (1) consumable resources; (2) sites of geomorphological interest; (3) land units with high potential for use, high productivity or value for conservation; (4) visual landscape; (5) slope instability processes. The procedure has been designed for implementation in a Geographic Information System (GIS) environment. Details are given on the application of the method to each individual impact analysed and results are presented in both numerical and map form.Impacts assessed were initially expressed by means of heterogeneous magnitudes, depending on the geomorphological feature considered. Those geomorphological impacts were then translated into significant terms and homogeneous magnitudes. Integration was carried out on the basis of impact values thus obtained. Final integrated results were also expressed in numerical and map form.The method proposed enables comparison of alternatives as well as ‘prediction’ and assessment of impacts in terms directly related to geomorphic characteristics. It also facilitates the expression of those impacts in terms that allow integration with other types of environmental impacts.