Benthic community structure and sediment processes on an intertidal flat: results from the ECOFLAT project

Interactions between physical and biological processes in intertidal sediments have been the focus of studies in the framework of the ECOFLAT project. Process studies were focused on the Molenplaat, a 1.5 km² intertidal flat in the Westerschelde estuary, The Netherlands. Distinct spatial patterns in the biological community on the flat were found and related to patterns in bottom shear stress as derived from a hydrodynamic model. Based on these survey results five stations were selected with contrasting sediment composition and benthic communities.Long-term net sedimentation of mainly sand was deduced from radionuclide profiles. Sedimentation of mud on the surface of part of the intertidal flat was shown to be a seasonally cyclic process, with a magnitude sufficient to significantly affect the mud balance of the estuary. Measurements of erodability as a function of tidal current showed a biological control on this variable. Benthic microalgae stabilise the sediment surface, whereas the benthic macrofauna has a destabilising effect.Food web studies show that the contrasting biological communities (microbenthos, meiobenthos, macrobenthos) at muddy and sandy sites have substantial differences in the quantitative aspects of their food web. Turnover of microalgae is much lower at muddy than at sandy sites, and this is mostly related to a lower grazing pressure. It is hypothesised that high mud content decreases the availability of benthic microalgae to grazers.We demonstrate a positive feedback between benthic microalgae and mud sedimentation which may lead to the existence of different stable states. This may explain the existence of relatively sharp boundaries and strong community contrasts in the presence of weak and smooth environmental gradients.     

A unified formulation for the three-dimensional shallow water equations using orthogonal co-ordinates: theory and application

In this paper, the formulations of the primitive equations for shallow water flow in various horizontal co-ordinate systems and the associated finite difference grid options used in shallow water flow modelling are reviewed. It is observed that horizontal co-ordinate transformations do not affect the chosen co-ordinate system and representation in the vertical, and are the same for the three- and two-dimensional cases. A systematic derivation of the equations in tensor notation is presented, resulting in a unified formulation for the shallow water equations that covers all orthogonal horizontal grid types of practical interest. This includes spherical curvilinear orthogonal co-ordinate systems on the globe. Computational efficiency can be achieved in a single computer code. Furthermore, a single numerical algorithmic code implementation satisfies. All co-ordinate system specific metrics are determined as part of a computer-aided model grid design, which supports all four orthogonal grid types. Existing intuitive grid design and visual interpretation is conserved by appropriate conformal mappings, which conserve spherical orthogonality in planar representation. A spherical curvilinear co-ordinate solution of wind driven steady channel flow applying a strongly distorted grid is shown to give good agreement with a regular spherical co-ordinate model approach and the solution based on a β-plane approximation. Especially designed spherical curvilinear boundary fitted model grids are shown for typhoon surge propagation in the South China Sea and for ocean-driven flows through Malacca Straits. By using spherical curvilinear grids the number of grid points in these single model grid applications is reduced by a factor of 50–100 in comparison with regular spherical grids that have the same horizontal resolution in the area of interest. The spherical curvilinear approach combines the advantages of the various grid approaches, while the overall computational effort remains acceptable for very large model domains.     

Miocene goethitic and chamositic oolites, northeastern Colombia

The late (?) Miocene non-marine to paralic Guayabo Group in northeastern Colombia and adjacent Venezuela contains as many as thirty-four thin (to 15 cm) goethitic and chamositic oolites and ooid-bearing sandstones in 1080 m of section. This eastward prograding deltaic complex consists mainly of chert-rich litharenite in fluvial, distributary channel, and shoreline facies, and of montmorillonite mudstone in floodplain and interdistributary embayment facies. Within this framework the oolites are restricted to a paralic association that developed during episodes of waning detrital sedimentation when distributary abandonment was followed by minor transgression across mudflats. Most of the multilayered and symmetrical ooids are composed of goethite, rarely with a small amount of chamosite. These are essentially spherical; many of the chamosite-rich ones have been plastically deformed. Goethitic ooids resemble those in a thin layer accumulating in brackish Lake Chad, central Africa. Chamositic ooids have affinities with those accumulating in a sea loch in western Scotland. Each of these examples is associated with detrital (silicate) sedimentation, apparently developed directly from colloidal ferric oxide and silicate precursors, and affords no evidence that primary aragonitic ooids were later placed by ironbearing oxide and clay.     

Compositional classification of “kimberlitic” and “non-kimberlitic” ilmenite

Ilmenite is one of the common kimberlitic indicator minerals recovered during diamond exploration, and its distinction from non-kimberlitic rock types is important. This is particularly true for regions where these minerals are present in relatively low abundance, and they are the dominant kimberlitic indicator mineral recovered. Difficulty in visually differentiating kimberlitic from non-kimberlitic ilmenite in exploration concentrates is also an issue, and distinguishing kimberlitic ilmenite from those derive from other similar rocks, such as ultramafic lamprophyres, is practically impossible. Ilmenite is also the indicator mineral whose compositional variety has the most potential to resolve provenance issues related to mineral dispersions with contributions from multiple kimberlite sources.

Various published data sets from selected kimberlitic (including kimberlites, lamproites, and various ultramafic lamprophyres) and non-kimberlitic rock types have been compiled and evaluated in terms of their major element compositions. Compositional fields and bounding reference lines for ilmenites derived from kimberlites (sensu stricto), ultramafic lamprophyres, and other non-kimberlitic rock types have been defined primarily on MgO–TiO₂ graphs as well as MgO–Cr₂O₃ relationships.     

The Metamorphic Evolution and Tectonic Significance of the Sumdo High and Ultrahigh Pressure Metamorphic Terrane, Central-South Lhasa Block, Tibet

Asthemaintectoniccomponentofthe Himalayan–Tibetan orogen,the Lhasa terrane has received much attention as it records the entire history of the orogeny.The occurrence of high pressure eclogite in the Sumdo complex in central Lhasa terrane has a significant importance on the understanding of the Paleo-Tethys subduction and plate itineration processes in this area.The petrological,geochemical and geochronological data of eclogite and associated blueschist and garnet-bearing mica schist from Sumdo,Jilang and Bailang area have been briefly reviewed to explore the origin and metamorphic evolution of this suture.Eclogites from the Sumdo complex have experienced low temperature,high pressure to ultrahigh pressure metamorphism,revealing a fastsubduction and exhumation process in a typical oceanic subduction zone.The large P-T range between different eclogites in the literature may be affected by the big error of unappropriated using geothermobarometry and may also because of slices of subducted blocks derived from different depths juxtapose together during exhumation.By summarizing the U-Pb,Lu-Hf and Sm-Nd ages of eclogites,the eclogite facies metamorphism is likely to occur in early Triassic during 245-225 Ma,but not the previously accepted late Permian at ca.260 Ma by the reinterpretation of the former geochronological data from literature.The opening of Paleo-Tethys Ocean between the Lhasa terrane initiate prior to ca.280 Ma and ultimate closure to integrate the Lhasa terrane was no earlier than225 Ma and may triggered by the initial subduction of Bangong-Nujiang Tethys Ocean in the north.     

Aeolian to marine transition in Cambro—Ordovician cratonic sheet sandstones of the northern Mississippi valley, U.S.A.

Cratonic quartz sandstones have presented several intractable problems. Besides their extreme textural and compositional maturity and paucity of shale, their sheet-like geometry is particularly notable. If the sandstones were entirely marine, as long supposed, such geometry is difficult to explain in terms of modern shelf sediments, which are generally held to be either relict or only slightly reworked by the Holocene transgression (palimpsest). Re-study of two quartz sandstones in the northern Mississippi Valley region reveals evidence for significant non-marine deposition followed by varying degrees of marine reworking during transgressions. Facies patterns are similar in the Cambrian Wonewoc and Ordovician St Peter sandstones, both of which overlie unconformities. In both, a large-scale cross-stratified facies believed to represent aeolian ergs passes laterally into a planar-and-channelled facies inferred to represent sand plains composed of braided fluvial and aeolian sand sheet deposits. Criteria of aeolian deposition in both facies include adhesion structures, large ripple index, fine climbing translatent lamination, grainfall and grainflow stratification. Criteria of braided fluvial deposition include shallow channels containing sequences of thinning-upward sets of trough cross-stratification, reactivation surfaces, low-index ripples, and polygonal cracks. Probable aeolian sand sheets contain flat bedding punctuated by small channels, adhesion structures, and coarse-sand ripples with large index. There is a conspicuous absence of trace and body fossils from these inferred non-marine deposits. In contrast is a burrowed and trough cross-stratified facies characterized by medium-scale cross-bedding alternating with bioturbated intervals and rare brachiopod or trilobite-mould coquinas, which is interpreted as shallow marine. In both formations, this last facies replaces laterally and overlaps the other two, reflecting transgression and variable reworking. The main areas of non-marine deposits in both formations are capped by a thin, burrowed subfacies that represents the culmination of each transgression; that is, a stillstand during which sediment influx ceased and both physical winnowing and bioturbation were intense. It is suggested that the sheet-like geometry of many cratonic quartz sandstones is due primarily to initial sand dispersal by aeolian and fluvial processes. That such processes must have been orders-of-magnitude more important on pre-Devonian, vegetation-free landscapes than they have been since, not only helps to explain the sheet-like character but also the exceptional maturity of the older cratonic sandstones.     

Late cretaceous Arman’ flora of Magadan oblast: Paleoclimatic interpretation

The Arman’ flora belongs to the formation of the same name in the Arman’ River basin and Nel’khandzha-Khasyn interfluve. It includes about 80 fossil plant species. The similarity of this flora to the reliably dated fossil floras of northwestern Kamchatka and the Pekul’nei Range dates it to being Turonian and Coniacian in age, which is corroborated by isotopic (U-Pb and ⁴⁰Ar/³⁹Ar) dating of the plant-bearing layers. The CLAMP method is used to estimate quantitative climatic variables, according to which the Arman’ flora existed in a temperate humid climate with warm summers and mild winters. This climate is especially similar to the conditions reconstructed from fossil plants of the Turonian Penzhina flora and the Coniacian Kaivayam and Tylpegyrgynai floras of Northeast Asia.     

Sulfur and iron speciation in surface sediments along the northwestern margin of the Black Sea

The speciation of sedimentary sulfur (pyrite, acid volatile sulfides (AVS), S⁰, H₂S, and sulfate) was analyzed in surface sediments recovered at different water depths from the northwestern margin of the Black Sea. Additionally, dissolved and dithionite-extractable iron were quantified, and the sulfur isotope ratios in pyrite were measured. Sulfur and iron cycling in surface sediments of the northwestern part of the Black Sea is largely influenced by (1) organic matter supply to the sediment, (2) availability of reactive iron compounds and (3) oxygen concentrations in the bottom waters. Biologically active, accumulating sediments just in front of the river deltas were characterized by high AVS contents and a fast depletion of sulfate concentration with depth, most likely due to high sulfate reduction rates (SRR). The δ³⁴S values of pyrite in these sediments were relatively heavy (−8‰ to −21‰ vs. V-CDT). On the central shelf, where benthic mineralization rates are lower, re-oxidation processes may become more important and result in pyrite extremely depleted in δ³⁴S (−39‰ to −46‰ vs. V-CDT). A high variability in δ³⁴S values of pyrite in sediments from the shelf-edge (−6‰ to −46‰ vs. V-CDT) reflects characteristic fluctuations in the oxygen concentrations of bottom waters or varying sediment accumulation rates. During periods of oxic conditions or low sediment accumulation rates, re-oxidation processes became important resulting in low AVS concentrations and light δ³⁴S values. Anoxic conditions in the bottom waters overlying shelf-edge sediments or periods of high accumulation rates are reflected in enhanced AVS contents and heavier sulfur isotope values. The sulfur and iron contents and the light and uniform pyrite isotopic composition (−37‰ to −39‰ vs. V-CDT) of sediments in the permanently anoxic deep sea (1494 m water depth) reflect the formation of pyrite in the upper part of the sulfidic water column and the anoxic surface sediment. The present study demonstrates that pyrite, which is extremely depleted in ³⁴S, can be found in the Black Sea surface sediments that are positioned both above and below the chemocline, despite differences in biogeochemical and microbial controlling factors.     

Wind-wave variability in a shallow tidal sea—Spectral modelling combined with neural network methods

In this paper the wind-wave variability in the tidal basins of the German Wadden Sea is modelled with combined numerical and neural-network (NN) methods. First, the wave propagation and transformation in the study area are modelled with the state-of-the-art third-generation spectral wave model SWAN. The ability of SWAN to accurately reproduce the phenomena of interest in nonstationary conditions governed by highly variable winds, water levels and currents is shown by comparisons of the modelled and measured mean wave parameters at four stations. The principal component analysis of the SWAN results is then used to reveal the dominating spatial patterns in the data and to reduce their dimensionality, thus enabling an efficient and relatively straightforward NN modelling of mean wave parameters in the whole study area. It is shown that the data produced with the approach developed in this work have statistical properties (discrete probability distributions of the mean wave parameters etc.) very close to the properties of the data obtained with SWAN, thus proving that this approach can be used as a reliable tool for wind wave simulation in coastal areas, complementary to (often computationally demanding) spectral wave models.     

Effects of mud sedimentation on lugworm ecosystem engineering

Benthic ecosystem engineering organisms attenuate hydrodynamic or biogeochemical stress to ameliorate living conditions. Bioturbating infauna, like the lugworm Arenicola marina, determine intertidal process dynamics by maintaining the sediment oxygenated and sandy. Maintaining the permeability of the surrounding sediment enables them to pump water through the interstitial spaces, greatly increasing the oxygen availability. In a field experiment, both lugworm presence and siltation regime were manipulated to investigate to what extent lugworms are able to cope with sedimentation of increasing mud percentage and how this would affect its ecosystem engineering. Fluorescent tracers were added to experimentally deposited mud to visualise bioturbation effects on fine sediment fractions. Lugworm densities were not affected by an increasing mud percentage in experimentally deposited sediment. Negative effects are expected to occur under deposition with significantly higher mud percentages. Surface chlorophyll a content was a function of experimental mud percentage, with no effect of lugworm bioturbation. Surface roughness and sediment permeability clearly increased by lugworm presence, whereas sediment erosion threshold was not significantly affected by lugworms. The general idea that A. marina removes fine sediment fractions from the bed could not be confirmed. Rather, the main ecosystem engineering effect of A. marina is hydraulic destabilisation of the sediment matrix.