SATURATION MAGNETIZATION MEASUREMENTS OF CARBONACEOUS CHONDRITES

The saturation magnetization of some carbonaceous chondrites was studied using a Faraday balance. The Faraday balance was shown to be an accurate (± 3%), reliable technique for measuring saturation magnetization by comparison with vibrating-sample magnetometer measurements on the same samples. Hyman and Rowe (1983) previously used these saturation magnetization measurements to measure the magnetite content of the five CI chondrites. Here, we present measurements on the magnetite contents of some CM2, CV3 and a CV5 chondrites. The method was also used to measure the content of metallic nickel-iron in Ornans, 3.4 ± 0.3%. Of the CM2 chondrites examined, only Bells, Essebi and Haripura had magnetite contents over about 1% by weight. A number of CV chondrites have magnetite between 2.3 and 13%, with little or no metallic iron. Leoville and Vigarano contain both magnetite and metallic iron, complicating the saturation magnetization results. Arch and Allende have very little metallic iron or magnetite, probably < 1% of either. This technique measures only ferrimagnetic magnetite; superparamagnetic magnetite with particle size < 300Å is ignored.     

Development of a technique for modelling clay liner desiccation

This paper presents a model for the analysis of clay liner desiccation in a landfill barrier system due to temperature effects. The model incorporates consideration of fully coupled heat‐moisture‐air flow, a non‐linear constitutive relationship, the dependence of void ratio and volumetric water content on stress, capillary pressure and temperature, and the effect of mechanical deformation on all governing equations. Mass conservative numerical schemes are proposed to improve the accuracy of the finite element solution to the governing equations. The application of the model is then demonstrated by examining three test problems, including isothermal infiltration, heat conduction and non‐isothermal water and heat transport. Comparisons are made with results from literature, and good agreement is observed. Copyright © 2003 John Wiley & Sons, Ltd.     

Hydrology and related changes after harvesting native forest catchments and establishing pinus radiata plantations. Part 3. Stream temperatures

Eight small steep south-west facing catchments (1-63-8-26 ha) have been monitored in Westland, New Zealand since 1974. Two catchments were retained in native mixed evergreen forest and the rest were subjected to various harvesting and land preparation techniques before being planted with Pinus radiata between 1977 and 1980. Stream temperatures were measured in all catchments for 11 years, including up to four years before harvesting. The streamwater temperature regime under the native forest cover has a seasonal cycle, with an annual mean of about 9°C and mean daily temperatures ranging between a winter minimum of about 5.8°C and a summer maximum of 12.S°C. After harvesting, the winter minimum stream temperatures in all trials were unchanged as topography exerts the major control over incoming solar radiation. The largest rises in mean summer stream temperatures, up to 5.5°C, were in the catchments that had been clearcut and burnt before planting. The maximum stream temperature recorded was 22.8°C in a clearcut catchment with no riparian reserve. Summer stream temperatures in this catchment were up to 11°C higher than in an adjacent control catchment. Summer stream temperature rises in catchments with riparian reserves were less than 1.5°C. Seven years after harvesting, stream temperatures were dropping towards pre-treatments levels in only two of the six treated catchments as revegetation of the riparian areas occurred and the plantations became established. As these small headwater streams discharge into streams with flows one or two orders of magnitude larger, the increases in summer stream temperatures will be rapidly dissipated. However, the cumulative impact of harvesting many small headwater catchments that discharge into a larger stream could have a noticeable effect on stream temperature if intact riparian reserves were not retained in both headwater and main streams.     

A method of analysis for horizontally embedded anchors in an elastic soil

A general method is presented for the analysis of horizontally embedded anchors in an elastic soil. Provision is made in the analysis for the consideration of anchor shape, layer depth, anchor–soil interface condition, breakaway of the anchor from the underlying soil and interaction between groups of anchors. Application of the analytical technique is illustrated for strip and circular anchors, and these solutions are presented in the form of influence charts which may be used directly in hand calculations to predict the elastic load deflection behaviour, of anchor plates for a wide variety of material and geometric conditions.     

An approach to hydrogeological modeling of a large system of groundwater-fed lakes and wetlands in the Nebraska Sand Hills,USA

The feasibility of a hydrogeological modeling approach to simulate several thousand shallow groundwater-fed lakes and wetlands without explicitly considering their connection with groundwater is investigated at the regional scale (~40,000 km²) through an application in the semi-arid Nebraska Sand Hills (NSH), USA. Hydraulic heads are compared to local land-surface elevations from a digital elevation model (DEM) within a geographic information system to assess locations of lakes and wetlands. The water bodies are inferred where hydraulic heads exceed, or are above a certain depth below, the land surface. Numbers of lakes and/or wetlands are determined via image cluster analysis applied to the same 30-m grid as the DEM after interpolating both simulated and estimated heads. The regional water-table map was used for groundwater model calibration, considering MODIS-based net groundwater recharge data. Resulting values of simulated total baseflow to interior streams are within 1% of observed values. Locations, areas, and numbers of simulated lakes and wetlands are compared with Landsat 2005 survey data and with areas of lakes from a 1979–1980 Landsat survey and the National Hydrography Dataset. This simplified process-based modeling approach avoids the need for field-based morphology or water-budget data from individual lakes or wetlands, or determination of lake-groundwater exchanges, yet it reproduces observed lake-wetland characteristics at regional groundwater management scales. A better understanding of the NSH hydrogeology is attained, and the approach shows promise for use in simulations of groundwater-fed lake and wetland characteristics in other large groundwater systems.     

Delta Scuti stars in the Praesepe cluster observed by the MOST satellite

The Praesepe cluster contains a number of δ Sct and γ Dor pulsators. Asteroseismology of cluster stars is simplified by the common distance, age and stellar abundances. Since asteroseismology requires a large number of known frequencies, the small pulsation amplitudes of these stars require space satellite campaigns. The present study utilizes photometric MOST satellite measurements in order to determine the pulsation frequencies of two evolved (EP Cnc, BT Cnc) and two main‐sequence (BS Cnc, HD 73872) δ Sct stars in the Praesepe cluster. The frequency analysis of the 2008 and 2009 data detected up to 34 frequencies per star with most amplitudes in the submillimag range. In BS Cnc, two modes showed strong amplitude variability between 2008 and 2009. The frequencies ranged from 0.76 to 41.7 cd^–1. After considering the different evolutionary states and mean stellar densities of these four stars, the differences and large ranges in frequency remain (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Anthropogenic "Litter" and macrophyte detritus in the deep Northern Gulf of Mexico

A deep-sea trawl survey of the Northern Gulf of Mexico has documented the abundance and diversity of human-generated litter and natural detrital plant material, from the outer margin of the continental shelf out to the Sigsbee abyssal plain. Plastics were the most frequently encountered type of material. Litter and debris were encountered more frequently in the eastern than in the western GoM. Land-derived plant material was located primarily within the head of the Mississippi Canyon, whereas ocean-derived plant material was spread evenly throughout the NE GoM. Human discards were principally from ships offshore. Some of the material was contained in metal cans that sank to the sea floor, probably in order to conform to international agreements that prohibit disposal of toxic material and plastics. The Mississippi Canyon was a focal point for litter, perhaps due to topography, currents or proximity to shipping lanes.     

Low flow water chemistry in forested and pasture catchments,Mawheraiti River,Westland

Water samples taken at 19 locations in the Mawheraiti River catchment at weekly intervals during 1979–80 were analysed for sodium, magnesium, potassium, calcium, phosphate, nitrate, and ammonium ion concentrations and for electrical conductivity. Seasonal discharge effects were apparent, and lithology and land management practice also influenced solute concentrations. Solute concentrations were generally very low; nitrate and soluble phosphate were rarely greater than 0.05 mg.L^‐1 and ammonium was rarely greater than 0.01 mg.L^‐1. The 4 major cations (Na, Mg, K, and Ca) usually summed to less than 6 mg.L^‐1 much of which was supplied by precipitation. Forest management (clearfelling and slash‐burning) caused significant increases in solute concentrations, but concentrations declined rapidly during succeeding months and approached pretreatment levels after 2–3 years. The higher concentrations associated with forest management in small experimental catchments were rapidly diluted downstream; together with the low natural solute concentrations this suggests that harmful downstream effects of management practices are unlikely under low flow conditions.     

Some effects of eutrophication and the removal of aquatic plants by grass carp (Ctenopharyngodon idella) on rainbow trout (Salmo gairdnerii) in Lake Parkinson,New Zealand

Temporary removal of aquatic plants in Lake Parkinson, a small, eutrophic dune lake, resulted in a number of changes to the population of stocked rainbow trout (Salmo gairdnerii). During each summer the lake stratified and low oxygen levels limited the distribution of trout to shallow (0–4 m) surface waters. In the first summer following weed removal the numbers of black shags (Phallacrocorax carbo) counted at the lake increased, and their predation resulted in a decline in trout density. However, the growth rate and condition of the trout population then exceeded that of trout present before weed removal. During the second summer after weed removal a cladoceran bloom was followed by low phytoplankton levels and high ammonia concentrations. A prolonged calm compounded this situation with the result that oxygen levels in bottom and surface waters dropped below 2 ppm. These low oxygen levels eliminated the trout population, but other fish species present survived. Elimination of aquatic plants affected the population dynamics of other fish species in the lake with potential implications for the trout. The experiment demonstrated the importance of weed beds in maintaining a stable fish community in lakes such as Lake Parkinson.     

Iterative tomographic analysis based on automatic refined picking

The ever-growing size of data sets for active and passive seismic imaging makes the availability of automatic procedures for rapid analysis more and more valuable. Such procedures are especially important for time-critical applications like emergency decisions or re-orienting of ongoing seismic surveys. In this paper a new, iterative scheme for 3D traveltime tomography is presented. The technique, based on a tool originally developed for earthquake data, uses cross-correlation to examine waveform similarity and to adjust arrival times on seismic sections. A preliminary set of reference arrival times is first corrected by the cross-correlation lag and then used to build an initial 3D tomographic velocity model through a standard inversion code; traveltimes calculated from this model are then taken as new reference arrivals and the process of pick adjustment is repeated. The result is a tomographic image, upgraded and refined at each iteration of the procedure. The test performed on the waveform data set recorded during the 2001 SERAPIS active seismic survey in the gulfs of Naples and Pozzuoli (Southern Italy) shows that the 3D iterative tomography scheme produces a velocity image of the structure of the Campi Flegrei caldera which is consistent with the results from previous studies, employing just a fraction of the time needed by a human analyst to identify first breaks. We believe that this technique can be effectively employed for rapid analysis of large data-sets within time-critical or time-dependent tasks and for automatic 4D tomographic investigations.