Growth and primary productivity of marine macrophytes exposed to domestic sewage effluents

This study provides the first response data for ten Southern California macrophytes exposed to untreated, primary, secondary and secondary chlorinated sewage effluent during long-term culture studies in the laboratory as well as short-term metabolic studies in the field and in the laboratory. Bossiella orbigniana, Lithothrix aspergillum and Corallina officinalis var, chilensis had relatively broad homeostatic capabilities and enhanced net production rates when exposed to primary treated sewage. In the long-term cultures, Amphiroa zonata, B. orbigniana and C. officinalis var. chilensis all demonstrated enhanced growth in the presence of primary sewage. Chlorination of effluent had only a short-term negative effect; i.e. species' responses to secondary and secondary chlorinated sewage were virtually identical beyond the second week in culture. Three populations of C. officinalis var. chilensis with differing pollution histories showed a tolerance to sewage corresponding to the extent of previous exposure, indicating that this species may be able to acclimate physiologically to sewage stress. The more sewage-tolerant macrophytes displayed lower photosynthetic quotient values during exposure to effluent than those possessing little tolerance to sewage.     

Potential environmental issues of CO2 storage in deep saline aquifers: Geochemical results from the Frio-I Brine Pilot test,Texas, USA

Sedimentary basins in general, and deep saline aquifers in particular, are being investigated as possible repositories for large volumes of anthropogenic CO₂ that must be sequestered to mitigate global warming and related climate changes. To investigate the potential for the long-term storage of CO₂ in such aquifers, 1600 t of CO₂ were injected at 1500 m depth into a 24-m-thick “C” sandstone unit of the Frio Formation, a regional aquifer in the US Gulf Coast. Fluid samples obtained before CO₂ injection from the injection well and an observation well 30 m updip showed a Na–Ca–Cl type brine with ∼93,000 mg/L TDS at saturation with CH₄ at reservoir conditions; gas analyses showed that CH₄ comprised ∼95% of dissolved gas, but CO₂ was low at 0.3%. Following CO₂ breakthrough, 51 h after injection, samples showed sharp drops in pH (6.5–5.7), pronounced increases in alkalinity (100–3000 mg/L as HCO₃) and in Fe (30–1100 mg/L), a slug of very high DOC values, and significant shifts in the isotopic compositions of H₂O, DIC, and CH₄. These data, coupled with geochemical modeling, indicate corrosion of pipe and well casing as well as rapid dissolution of minerals, especially calcite and iron oxyhydroxides, both caused by lowered pH (initially ∼3.0 at subsurface conditions) of the brine in contact with supercritical CO₂.     

Crystal fractionation and partial melting in the petrogenesis of a Proterozoic high-MgO volcanic suite,Ungava, Québec

There is little concensus on the relative importance of crystal fractionation and differential partial melting to the chemical diversity observed within most types of volcanic suites. A resolution to this controversy is best sought in suites containing high MgO lavas such as the Chukotat volcanics of the Proterozoic Cape Smith foldbelt, Ungava, Quebec. The succession of this volcanic suite consists of repetitive sequences, each beginning with olivine-phyric basalt (19-12 wt% MgO), grading upwards to pyroxene-phyric basalt (12-8 wt% MgO) and then, in later sequences, to plagioclase-phyric basalt (7-4 wt% MgO). Only the olivine-phyric basalts have compositions capable of equilibrating with the upper mantle and are believed to represent parental magmas for the suite. The pyroxene-phyric and plagioclase-phyric basalts represent magmas derived from these parents by the crystal fractionation of olivine, with minor chromite, clinopyroxene and plagioclase. The order of extrusion in each volcanic sequence is interpreted to reflect a density effect in which successively lighter, more evolved magmas are erupted as hydrostatic pressure wanes. The pyroxene-phyric basalts appear to have evolved at high levels in the active part of the conduit system as the eruption of their parents was in progress. The plagioclase-phyric basalts may represent residual liquids expelled from isolated reservoirs along the crust-mantle interface during the late stages of volcanic activity.A positive correlation between FeO and MgO in the early, most basic olivine-phyric basalts is interpreted to reflect progressive adiabatic partial melting in the upper mantle. Although this complicates the chemistry, it is not a significant factor in the compositional diversification of the volcanic suite. The preservation of such compositional melting effects, however, suggests that the most basic olivine-phyric basalts represent primitive magmas. The trace element characteristics of these magmas, and their derivatives, indicate that the mantle source for the Chukotat volcanics had experienced a previous melting event.     

The fluctuation origin of cosmic radiation

We have investigated the origin of cosmic radiation in terms of a sudden injection of particles in time, momentum and space. The appropriate boundary conditions for the various regions through which the particles pass were used. With all of the acceleration within a turbulent region, we find that the observed spectrum is explained by a continuous deceleration in which statistical fluctuations dominate. This is contradictory to the usual assumptions in which fluctuations do not play an important part. We find that the time dependent solution has an exponent of the power law spectrum that varies weakly with the momentum and time. The steady state solution shows the usual constant exponent.This work was supported by the National Aeronautics and Space Administration under Grant NsG-695.     

Synthetic coral-reef terraces and variations of Quaternary sea level

Coral-reef terraces on tectonically elevated coasts provide important data on variations of sea level. In this paper a systematic approach is presented for the construction of synthetic reef terraces. Idealized reef terraces are generated assuming a constant rate of tectonic uplift ν and a harmonic variation of sea level with amplitudeh_wo and period τ. It is further assumed that coral terraces grow only during periods of relative sea-level rise. The behavior is governed by the parameter u = τυ/2π h_wo. If u > 1 no reef terraces form. If 0.217 < u < 1 a discontinuous series of terraces form on the uplifting basement. If 0 < u < 0.217 the basement is covered with coral and a series of coral terraces forms on this coral. Uplifted coral-reef terraces on the Huon Peninsula, Papua New Guinea, compare reasonably well with terraces generated by our model with τ = 20,000 years andh_wo = 21.4 m. We also compare the observed terraces with model terraces using the paleo sea level inferred from¹⁸O/¹⁶O data. The observed terraces are qualitatively similar to those predicted using the oxygen isotope data, however, the model terraces require larger relative sea-level variations with a near 20,000 year period than those inferred directly from the¹⁸O/¹⁶O data.     

Rockfall Hazard Analysis From Discrete Fracture Network Modelling with Finite Persistence Discontinuities

Developing an accurate representation of the rock mass fabric is a key element in rock fall hazard analysis. The orientation, persistence and density of fractures control the volume and shape of unstable blocks or compartments. In this study, the discrete fracture modelling technique and digital photogrammetry were used to accurately depict the fabric. A volume distribution of unstable blocks was derived combining polyhedral modelling and kinematic analyses. For each block size, probabilities of failure and probabilities of propagation were calculated. A complete energy distribution was obtained by considering, for each block size, its occurrence in the rock mass, its probability of falling, its probability to reach a given location, and the resulting distribution of energies at each location. This distribution was then used with an energy–frequency diagram to assess the hazard.     

Resolving mechanisms of toxicity while pursuing ecotoxicological relevance?

In this age of modern biology, aquatic toxicological research has pursued mechanisms of action of toxicants. This has provided potential tools for ecotoxicologic investigations. However, problems of biocomplexity and issues at higher levels of biological organization remain a challenge. In the 1980s and 1990s and continuing to a lesser extent today, organisms residing in highly contaminated field sites or exposed in the laboratory to calibrated concentrations of individual compounds were carefully analyzed for their responses to priority pollutants. Correlation of biochemical and structural analyses in cultured cells and tissues, as well as the in vivo exposures led to the production and application of biomarkers of exposure and effect and to our awareness of genotoxicity and its chronic manifestations, such as neoplasms, in wild fishes. To gain acceptance of these findings in the greater environmental toxicology community, “validation of the model” versus other, better-established often rodent models, was necessary and became a major focus. Resultant biomarkers were applied to heavily contaminated and reference field sites as part of effects assessment and with investigations following large-scale disasters such as oil spills or industrial accidents.

Over the past 15 years, in the laboratory, small aquarium fish models such as medaka (Oryzias latipes), zebrafish (Danio rerio), platyfish (Xiphophorus species), fathead minnow (Pimephales promelas), and sheepshead minnow (Cyprinodon variegatus) were increasingly used establishing mechanisms of toxicants. Today, the same organisms provide reliable information at higher levels of biological organization relevant to ecotoxicology. We review studies resolving mechanisms of toxicity and discuss ways to address biocomplexity, mixtures of contaminants, and the need to relate individual level responses to populations and communities.     

Calibration of the high-pressure cohesive strength meter (CSM)

Coastal erosion is an immense economic and social problem that has been receiving increased attention in recent years. A number of devices have been developed to determine the sediment stability in coastal areas: laboratory and field flumes; a range of different erosion devices; shear vanes and fall cone penetrometers. The cohesive strength meter (CSM) erosion device was developed to determine in situ the temporal and spatial variations in the erosion threshold of muddy intertidal sediments. Technological developments have enabled considerable improvements to be made to the original design over the last 15 years.