The geological significance of the western termination of the Mérens Fault at Port Vell (central Pyrenees)

A detailed local structural map of the Mérens Fault zone at Port Vell (Vall Ferrera) reveals that the main fault-related mylonite band splits westwards into a network of mylonite zones. These consist of bands of highly-strained rocks exhibiting tightened folds, transposed foliations and extensive obliteration of pre-existing structures. Evidence of continuity of marble layers across the Port Vell mylonite zone, and structural and metamorphic similarities on both sides of the Port Vell mylonite band, indicate that there is no significant throw across it.The mylonite foliation forms parallel to the axial planes of tight folds in or near the mylonite zone which can be related to more open folds in adjacent areas. The Port Vell mylonite band corresponds to a pinched W-E axial trending late fold.In order to estimate the importance of these results, a review of the controversial geological significance of mylonite belts in the Pyrenees, with special emphasis on the Mérens Fault, introduces the paper.     

The petrology and petrogenesis of the Tertiary anorogenic mafic lavas of Southern and Central Queensland,Australia — Possible implications for crustal thickening

The Miocene-Oligocene volcanism of this region is part of the larger Tertiary volcanic province found throughout E. Australia. Within the S.E. Queensland region, the volcanism is strongly bimodal, and has emanated from six major centres, and many additional smaller centres. The mafic lavas (volumetrically dominant) range continuously from ne-normative through to Q-normative and are predominantly andesine-normative; Mg/Mg+Fe (atomic ratios range from 30–60; K₂O ranges from 0.42–2.93%, and TiO₂ from 0.81–3.6%.Phenocryst contents are low (averaging 6.7 vol.%), and comprise olivine (Fa_18–75; Cr-spinel inclusions occur locally in Mg-rich phenocrysts), plagioclase (An_25–68), and less commonly augite, which is relatively aluminous in lavas of the Springsure volcanic centre. Very rare aluminous bronzite occurs in certain Q-normative lavas. Groundmass minerals comprise augite, olivine (Fa_33–77), feldspar (ranging from labradorite through to anorthoclase and sanidine), Fe-Ti oxides, and apatite. Within many of the Q-normative lavas, extensive development of subcalcic and pigeonitic pyroxenes occurs, and also relatively rarely orthopyroxene. Mineralogically, the ne- and ol-normative lavas, and some of the Q-normative lavas are indistinguishable, and in view of the gradations in chemistry, the term hawaiite has been extended to cover these lavas. The term tholeiitic andesite is used to describe the Q-normative lavas containing Ca-poor pyroxenes as groundmass phases.Megacrysts of aluminous augite, aluminous bronzite, olivine, ilmenite, and spinel sporadically occur within the lavas, and their compositions clearly indicate that they are not derived from the Upper Mantle. Rare lherzolite xenoliths are also found.The petrogenesis of these mafic lavas is approached by application of the thermodynamic equilibration technique of Carmichael et al. (1977), utilizing three parental mineral assemblages that could have been in equilibrium with the magmas at P and T. The models are: (a) standard upper mantle mineralogy; (b) an Fe-enriched upper mantle model (Wilkinson and Binns 1977); (c) lower crust mineralogy, based on analysed megacryst compositions. The calculations suggest that these mafic magmas were not in equilibrium with either mantle model prior to eruption, but show much closer approaches to equilibrium with the lower crust model. Calculated equilibration temperatures and pressures (for the lower crust model) range from 995°–l,391° C (average 1,192), and 7.2–16.3 kb (average 12.4). These results are interpreted in terms of a model of intrusion and magma fractionation within the crust-mantle interface region, with consequent crustal underplating and thickening beneath the Tertiary volcanic regions. Some support for the latter is provided by regional isostatic gravity anomalies and physiographic considerations.     

Cuttability assessment of hard coal seams

Summary A number of field and laboratory tests have been carried out on more than 15 coal seams of compressive strengths ranging from 19 MPa to 44 MPa to evolve methods which would help in the selection of suitable coaling machines for hard coal seams. The effect of physico-mechanical properties on cuttability were studied in the laboratory for all these coal seams to identify the relevant parameters affecting the specific energy of coal cuttability. These data were subjected to regression analysis to find the best fit for estimation of laboratory specific energy of coal samples on the basis of simple laboratory and field tests for the strength parameters. Field studies were also conducted over a large number of active mechanized coal faces to study in situ cuttability along with the geo-mining conditions of the site. The field and the laboratory data so generated were correlated and an attempt is made to establish a relationship for estimating the field specific energy for a particular capacity of coaling machines by considering the geo-mining domain of the field in totality.     

Recursive seismic ray modelling: applications in inversion and VSP

The recursive nature of rays in blocky models can be exploited to solve some difficult problems in seismic modelling. Each segment of a ray travels from an initial point up to a reflecting interface, where it is split into reflected and transmitted ray segments, which each continue in a similar way. The tree structure that thus emanates is conveniently handled by a recursive scheme. Recursion allows an automatic generation of all phases on a seismogram, together with all information necessary to analyse or select them. By operating recursively with a ray cell, bounded by a pair of vicinal rays in 2D, or a triplet of vicinal rays in 3D, and two successive isochrons, the two-point ray-tracing problem is reduced to a simple interpolation. Also, the cellular approach allows for a stable and robust evaluation of dynamic ray quantities without any paraxial tracing, which is cumbersome in blocky models of realistic complexity. Geometric shadows are filled by recursively generated diffractions. The recursive ray tracer has found applications in the fast computation of Green's functions in target-oriented inversion and in phase identification in VSP.     

Heterogeneous distributions of CO2 may be more important for dissolution and karstification in coastal eogenetic limestone than mixing dissolution

Mixing dissolution, a process whereby mixtures of two waters with different chemical compositions drive undersaturation with respect to carbonate minerals, is commonly considered to form cavernous macroporosity (e.g. flank margin caves and banana holes) in eogenetic karst aquifers. On small islands, macroporosity commonly originates when focused dissolution forms globular chambers lacking entrances to the surface, suggesting that dissolution processes are decoupled from surface hydrology. Mixing dissolution has been thought to be the primary dissolution process because meteoric water would equilibrate rapidly with calcium carbonate as it infiltrates through matrix porosity and because pCO₂ was assumed to be homogeneously distributed within the phreatic zone. Here, we report data from two abandoned well fields in an eogenetic karst aquifer on San Salvador Island, Bahamas, that demonstrate pCO₂ in the phreatic zone is distributed heterogeneously. The pCO₂ varied from less than log ?2.0 to more than log ?1.0 atm over distances of less than 30 m, generating dissolution in the subsurface where water flows from regions of low to high pCO₂ and cementation where water flows from regions of high to low pCO_2. Using simple geochemical models, we show dissolution caused by heterogeneously distributed pCO₂ can dissolve 2.5 to 10 times more calcite than the maximum amount possible by mixing of freshwater and seawater. Dissolution resulting from spatial variability in pCO₂ forms isolated, globular chambers lacking initial entrances to the surface, a morphology that is characteristic of flank margin caves and banana holes, both of which have entrances that form by erosion or collapse after cave formation. Our results indicate that heterogeneous pCO₂, rather than mixing dissolution, may be the dominant mechanism for observed spatial distribution of dissolution, cementation and macroporosity generation in eogenetic karst aquifers and for landscape development in these settings. Copyright © 2015 John Wiley & Sons, Ltd.     

Field Measurements and Numerical Simulations of the 2004 Tsunami Impact on the East Coast of Sri Lanka

This paper employs a numerical model of tsunami propagation together with documented observations and field measurements of the evidence left behind by the tsunami in December 2004, to identify and interpret the factors that have contributed to the significant spatial variability of the level of tsunami impact along the coastal belt of the eastern province of Sri Lanka. The model results considered in the present analysis include the distribution of the amplitude of the tsunami and the pattern of wave propagation over the continental shelf off the east coast, while the field data examined comprise the maximum water levels measured at or near the shoreline, the horizontal inundation distances and the number of housing and other buildings damaged. The computed maximum amplitude of the tsunami at water points nearest the shoreline along the east coast shows considerable variation ranging from 2.2 m to 11.4 m with a mean value of 5.7 m; moreover, the computed amplitudes agree well with the available field measurements. We also show that the shelf bathymetry off the east coast, particularly the submarine canyons at several locations, significantly influences the near-shore transformation of tsunami waves, and consequently, the spatial variation of the maximum water levels along the coastline. The measured values of inundation also show significant variation along the east coast and range from 70 m to 4560 m with a median value of 700 m. Our analyses of field data also show the dominant influence of the coastal topography and geomorphology on the extent of tsunami inundation. Furthermore, the measured inundation distances indicate no apparent correlation with the computed tsunami heights at the respective locations. We also show that both the computed tsunami heights and the measured inundation distances for the east coast closely follow the log-normal statistical distribution.     

Gratkorn: A benchmark locality for the continental Sarmatian s.str. of the Central Paratethys

This paper presents one of the richest and most complete vertebrate faunas of the late Middle Miocene (~12 Ma) of Central Europe. Up to now, sixty-two vertebrate taxa, comprising all major groups (fishes, amphibians, reptiles, birds, mammals), have been recorded. Based on sedimentological and palaeobiological evidences, this Fossillagerstätte is assumed to originate from a floodplain paleosol formed on top of a braided river sequence. The fauna points to a highly structured, somewhat vegetated landscape with a wide array of habitats (e.g., fluvial channels, sporadically moist floodplains, short-lived ponds, savannah-like open areas and screes). It was preserved due to a rapid drowning and the switch to a freshwater lake environment. Palaeoclimatological data, derived from pedogenic features as well as from biota, indicate an overall semi-arid, subtropical climate with distinct seasonality (mean annual precipitation 486 ± 252 mm, mean annual temperature ~15°C). This underlines the late Middle/early Late Miocene dry-spell in Central Europe. From taphonomical point of view, the irregularly distributed but roughly associated larger vertebrate remains refer to an in situ accumulation of the bone bed. Splintered bones, gnawing marks as well as rhizoconcretions and root corrosion structures record some pre- and post-burial modification of the taphocoenose. However, the findings of pellet remains argue for a very fast burial and thus to a low degree of time-averaging. For this reason, the fossil fauna reflects the original vertebrate community rather well and is a cornerstone for the understanding of late Middle Miocene terrestrial ecosystems in this region. Certainly, Gratkorn will be one of the key faunas for a high-resolution continental biostratigraphy and the comprehension of Europe’s faunal interchanges near the Middle/Late Miocene transition.     

Uncertainty analysis of urban sewer system using spatial simulation of radar rainfall fields: New York City case study

The goal of this study is to investigate the uncertainty of an urban sewer system’s response under various rainfall and infrastructure scenarios by applying a recently developed nonparametric copula-based simulation approach to extreme rainfall fields. The approach allows for Monte Carlo simulation of multiple variables with differing marginal distributions and arbitrary dependence structure. The independent and identically distributed daily extreme rainfall events of the corresponding urban area, extracted from nationwide high resolution radar data stage IV, are the inputs of the spatial simulator. The simulated extreme rainfall fields were used to calculate excess runoff using the Natural Resources Conservation Service’s approach. New York City is selected as a case study and the results highlight the importance of preserving the spatial dependence of rainfall fields between the grids, even for simplified hydrologic models. This study estimates the probability of combined sewer overflows under extreme rainfall events and identifies the most effective locations in New York City to install green infrastructure for detaining excess stormwater runoff. The results of this study are beneficial for planners working on stormwater management and the approach is broadly applicable because it does not rely on extensive sewer system information.     

A rifted inside corner massif on the Mid-Atlantic Ridge at 5°S

The structure of the Mid-Atlantic Ridge at 5°S was investigated during a recent cruise with the FS Meteor. A major dextral transform fault (hereafter the 5°S FZ) offsets the ridge left-laterally by 80 km. Just south of the transform and to the west of the median valley, the inside corner (IC – the region bounded by the ridge and the active transform) is marked by a major massif, characterized by a corrugated upper surface. Fossil IC massifs can also be identified further to the west. Unusually, a massif almost as high as the IC massif also characterizes the outside corner (OC) south of the inactive fracture zone and to the east of the median valley. This OC massif has axis-parallel dimensions identical to the IC massif and both are bounded on their sides closest to the spreading axis by abrupt, steep slopes. An axial volcanic ridge is well developed in the median valley both south of the IC/OC massifs and in an abandoned rift valley to the east of the OC massif, but is absent along the new ridge-axis segment between the IC and OC massifs. Wide-angle seismic data show that between the massifs, the crust of the median valley thins markedly towards the FZ. These observations are consistent with the formation of the OC massif by the rifting of an IC core complex and the development of a new spreading centre between the IC and OC massifs. The split IC massif presents an opportunity to study the internal structure of the footwall of a detachment fault, from the corrugated fault surface to deeper beneath the fault, without recourse to drilling. Preliminary dredging recovered gabbros from the scarp slope of the rifted IC massif, and serpentinites and gabbros from the intersection of this scarp with the corrugated surface. This is compatible with a concentration of serpentinites along the detachment surface, even where the massif internally is largely plutonic in nature.