The S(c) spectrum machine to visualize the motion in galaxies

The behavior of the orbits in a galaxy model composed of an harmonic core and a strong bar potential is studied. Numerical calculations show that a large number of orbits display chaotic motion. These orbits are low angular momentun orbits. The percentage of chaotic orbits increases as the angular velocity of the system increases or the strength of the harmonic term decreases. A new dynamical parameter, the S(c) spectrum, is introduced and used to detect the island motion and the evolution of the sticky regions. Comparison to previously obtained results reveals the leading role of the new spectrum. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Asymmetrical Eruption of a Quiescent Filament and Associated Halo CME

We will present detailed observations of the asymmetrical eruption of a large quiescent filament on 24 November 2002, which was followed by a two-ribbon flare, three coronal dimmings, endpoint brightenings, and a very fast halo-type coronal mass ejection (CME). Before the eruption, the filament lay along the main neutral line (MNL) underneath a single-arcade helmet streamer with a simple bipolar configuration. However, photospheric magnetic fields on both sides of the filament showed an asymmetrical distribution, and the filament and MNL were not located just at the center of the streamer base but were closer to the eastern leg of the streamer arcade. Therefore, instead of erupting along the streamer’s symmetrical axis, the filament showed a nonradial and asymmetrical eruption. It lifted from the eastern flank of the streamer arcade to impact the western leg directly, leading to an asymmetrical CME that expanded westward; eventually the streamer was disrupted significantly. Accordingly, the opposite-polarity coronal dimmings at both sides of the filament forming in the eruption also showed an asymmetrical area distribution. We thus assume that the streamer arcade could guide the filament at the early eruption phase but failed to restrain it later. Consistent with previous results, these observations suggest that the global background magnetic field can impose additional action on the initial eruption of the filament and CME, as well as the dimming configuration.     

Workshop summary on physical and chemical properties of potential Earth impactors

Abstract— From 2001 June 17 to 25, we held the first international workshop in Erice, Italy, dedicated to the determination of geological and geophysical properties of near‐Earth objects (NEOs). The goal was to develop a roadmap for determining the physical and chemical properties of NEOs in the coming decades to meet the scientific requirements for development of Earth collision avoidance technology. We identified many properties that are desired, but four measurements are needed most critically for any potentially hazardous NEO: (1) its mass, (2) its mass distribution, (3) its material strengths, and (4) its internal structure. Global (whole‐body) properties, such as material strengths and internal structure, can be determined best from the analyses of permeating waves: artificially initiated seismology and multifrequency reflection and transmission radio tomography. Seismology provides the best geophysical (material strengths) data of NEOs composed of consolidated materials while radio tomography provides the best geological data (e.g., the state of fracture) of electrically nonconducting media. Thus, the two methods are complementary: seismology is most suitable for stony and metallic asteroids, while radio tomography is most appropriate for comet nuclei and carbonaceous asteroids. The three main conclusions are (1) remote sensing for physical characterization should be increased, (2) several dedicated NEO missions should be prepared for geophysical and geological investigations, and (3) that it is prudent to develop and prove the technology to make geophysical measurements on NEOs now.     

Coeval argon‐40/argon‐39 ages of moldavites from the Bohemian and Lusatian strewn fields

Abstract— ⁴⁰Ar/³⁹Ar ages of four tektites (moldavites) from southern Bohemia (near ?eské Budějovice, Czech Republic) and a tektite from Lusatia (near Dresden, Germany) have been determined by 11 step‐degassing experiments. The purpose of the study was to enlarge the ⁴⁰Ar/³⁹Ar data base of moldavites and to check the age relations of the Bohemian and Lusatian samples. The mean plateau‐age of the Bohemian samples, which range from 14.42 to 14.70 Ma, is 14.50 ± 0.16 (0.42) (2σ) Ma (errors in parentheses include age error and uncertainty of standard monitor age). The plateau age of the Lusatian sample of 14.38 ± 0.26 (0.44) (2σ) Ma confirms the previously published ⁴⁰Ar/³⁹Ar age of 14.52 ± 0.08 (0.40) (2σ) Ma, and demonstrates that the fall of Lusatian and Bohemian tektites were contemporaneous. Because of their geochemistry and their ages there is no doubt that the Lusatian tektites are moldavites. Accepting that moldavites are ejecta from the Nördlinger Ries impact, the new ages also date the impact event. This age is slightly younger (about 0.2–0.3 Ma) than the age suggested by earlier K‐Ar determinations.     

A potentially new type of nonchondritic interplanetary dust particle with hematite,organic carbon,amorphous Na,Ca‐aluminosilicate,and FeO‐spheres

Abstract– We used a combination of different analytical techniques to study particle W7190‐D12 using microinfrared spectroscopy, micro‐Raman spectroscopy, and field emission scanning electron microscopy (FESEM) energy dispersive X‐ray spectroscopy (EDS). The particle consists mainly of hematite (α‐Fe₂O₃) with considerable variations in structural disorder. It further contains amorphous (Na,K)‐bearing Ca,Al‐silicate and organic carbon. Iron‐bearing spherules (<150 nm in diameter) cover the surface of this particle. At local sites of structural disorder at the hematite surface, the hematite spheres were reduced to FeO in the presence of organic carbons forming FeO‐spheres. However, metallic Fe spheres cannot be excluded based on the available data. To the best of our knowledge, this particle is the first detection of such spherules at the surface of a stratospheric dust particle. Although there is no definitive evidence for an extraterrestrial origin of particle W7190‐D12, we suggest that it could be an IDP that had moved away from the asteroid‐forming region of the early solar system into the outer solar system of the accreting Kuiper Belt objects. After it was released from a Jupiter family comet, this particle became part of the zodiacal cloud. Atmospheric entry flash‐heating caused (1) the formation of microenvironments of reduced iron oxide when indigenous carbon materials reacted with hematite covering its surface resulting in the formation of FeO‐spheres and (2) Na‐loss from Na,Al‐plagioclase. The particle of this study, and other similar particles on this collector, may represent a potentially new type of nonchondritic IDPs associated with Jupiter family comets, although an origin in the asteroid belt cannot be ignored.     

Oort Cloud Comet Perihelion Asymmetries: Galactic Tide, Shower or Observational Bias?

We investigate the distribution of Oort cloud comet perihelia. The data considered includes comets having orbital elements of the two highest quality classes with original energies designated as new or young. Perihelion directions are determined in galactic, ecliptic and geocentric equatorial coordinates. Asymmetries are detected in the scatter and are studied statistically for evidence of adiabatic galactic tidal dynamics, an impulse-induced shower and observational bias. The only bias detected is the well-known deficiency of observations with perihelion distances q > 2.5 AU. There is no significant evidence of a seasonal dependence. Nor is there a substantive hemispherical bias in either ecliptic or equatorial coordinates. There is evidence for a weak stellar shower previously detected by Biermann which accounts for ≈ 10% of the total observations. Both the q bias and the Biermann star track serve to weaken the evidence for a galactic tidal imprint. Nevertheless, statistically significant asymmetries in galactic latitude and longitude of perihelia remain. A latitude asymmetry is produced by a dominant tidal component perpendicular to the galactic disk. The longitude signal implies that ≈ 20% of new comets need an additional dynamical mechanism. Known disk non-uniformities and an hypothetical bound perturber are discussed as potential explanations. We conclude that the detected dynamical signature of the galactic tide is real and is not an artifact of observational bias, impulsive showers or poor data. This revised version was published online in July 2006 with corrections to the Cover Date.     

TiN PRODUCTION IN A GLOW DISCHARGE

We have been studying direct current glow discharges aiming at the production of different paint of coatings on steel substrates. In a set of preliminary experiments, long lasting (hours) discharges performed in a Nitrogen atmosphere between a stell anode (holding the substrates) and a titanium cathode separated by a small gap (few mm) produced very thin coatings of the substrates whose colour depend on the parameter of (interelectrodes gap, gas pressure, discharge current and time duration). In some conditions, the coatings showed a golden colour, typical of the Nti compound. A discussion of the results is given.     

Gaseous Jets in Comet Hale-Bopp (1995 O1)

We report the identification of gas jets in comet Hale-Bopp in OH, NH, CN, C₂ and C₃. This is the first time OH and NH jets without an obvious optical dust jet counterpart have been identified in narrowband comet images. We also confirm the existence of CN jets as reported by Larson et al. (1997) and Mueller et al. (1998). Jet features can be seen in the March and April 1997 datasets, approximately a month before and after perihelion. Our results contribute to the understanding of both the chemical properties of the comet as well as the physical mechanisms necessary to produce these features. This revised version was published online in July 2006 with corrections to the Cover Date.     

The GREGOR polarimetric calibration unit

The new Solar telescope GREGOR is designed to observe small‐scale dynamic magnetic structures below a size of 70 km on the Sun with high spectral resolution and polarimetric accuracy. For this purpose, the polarimetric concept of GREGOR is based on a combination of post‐focus polarimeters with pre‐focus equipment for high precision calibration. The Leibniz‐Institute for Astrophysics Potsdam developed the GREGOR calibration unit which is an integral part of the telescope. We give an overview of the function and design of the calibration unit and present the results of extensive testing series done in the Solar Observatory “Einsteinturm” and at GREGOR (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)