Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Exploring the orientations which characterise the likely public acceptance of low emission energy technologies

There is a large body of research and development into the low emission energy technologies that has the potential to assist developed and developing countries transition to more sustainable energy systems. It has long been recognised that public perceptions can have a fundamental effect on the market for technology and this issue raises questions about the role society will play in developing a low emissions energy future. Understanding how the public will respond to the range of low emission energy technologies as part of a climate change mitigation package is therefore critical for researchers, policy makers and industry stakeholders. In the current research, we investigated the Australian public’s likely acceptance of a range of low emission energy technologies by assessing the diverse ‘orientations’ that have emerged in response to low emission energy technologies. In a survey of two Australian states we measured the support for, and knowledge of, a range of low emission energy technologies. Using self-organising maps, a relatively new approach for segmenting response profiles, we identified that at least four distinct ‘orientations’ have emerged toward the issue and are characterising the likely acceptance of these technologies: ‘Disengaged’, ‘Nuclear Oriented’, ‘Renewables Oriented’, and ‘Engaged’. The implications of these multiple public viewpoints are described for climate change mitigation policy and for future research into the social acceptance of alternative energy technologies.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

A study of volcanogenic exhalation mineralization

This paper considers volcanogenic exhalation mineralization using data from 35 years of observation of fumarole activity during an earlier phase of the posteruptive activity of the Second Cone, which is one of the New Tolbachik volcanoes that were formed during the eruption at the North Vent of the Great Tolbachik Fissure Eruption (Kamchatka, 1975–1976). We describe the main types of mineral associations, identify the key mineral species and the secondary and accessory minerals, as well as the sequence of mineral generation. We provide a summary of minerals and compounds that have been identified in ejecta of fumaroles on the Second Cone.     

Ionosphere and surface weather

Summary The author describes the pulsing ionospheric technique which since 1939 has been successfully employed for forecasting surface weather.     

Formation of metamorphic biotite by decarbonation

Microcline is not necessarily the source of the K content of metamorphic biotite. The biotite may be formed by decalcitization; the released Ca reacts with Al, derived from sericite and chlorite, to form some calc-alumino-silicate such as plagioclase or epidote. It may also result from the reaction of sericite with the Fe---Mg released by dedolomitization. The biotitic character of meta-calco-pelites from the Belgian Ardenne, increasing with their anorthite content, illustrates this mode of biotite formation.     

High-Resolution Non-Hydrostatic Simulations of Flash-Flood Episodes with Grid-Nesting and Ice-Phase Parameterization

Summary ?Simulations of two heavy rainfall events south of the Alps have been conducted with a non-hydrostatic model at horizontal resolutions ranging from 40 to 2.5 km. Emphasis is placed on the assessment of two recent model developments: a detailed explicit mixed phase microphysical scheme and a two-way interactive grid nesting method. In the high-resolution simulations, the impact of the ice phase was found to be quite substantial, accelerating the propagation of the surface front and modifying the spatial distribution of the rainfall. Simulations carried out with two-way interactive grid nesting yielded more realistic overall precipitation patterns, particularly at the finest horizontal resolution. Received March 22, 1999/Revised June 28, 1999     

Higher order analytical solutions of water table fluctuations in coastal aquifers

The groundwater response of coastal aquifers to tidal forcing is described by Laplace's equation coupled with the nonlinear phreatic-free surface boundary condition. Here we describe fluctuations in the water table using two small parameters, extending previous work by proposing an ansatz to compute higher order, semi-analytical solutions. The new solutions are compared with known lower order solutions. The relative difference between the linear solution and higher order solutions can reach up to 30% of the linear solution for shallow beaches. The new solutions exhibit a reduction in the over height of the groundwater fluctuations compared with the lower order solutions. In addition, the super elevation of the water table, both near shore and as the aquifer tends landward, is examined with the inclusion of higher order terms.     

Ice-sheet growth and high-latitudes sea-surface temperature

The response of the LLN 2-D climate model to the insolation and CO₂ forcings during the Eemian interglacial is compared to reconstructions obtained from deep-sea cores drilled in the Norwegian Sea and in the North Atlantic. Both reconstructions and modeling results show a decrease of sea-surface temperature (SST) in the higher latitudes (70–75 °N zonal belt for the model and the Norwegian Sea for the proxy records), associated with a more moderate cooling at lower latitudes (50–55 °N and North Atlantic), at the middle of isotopic substage 5e, several millenia before the beginning of continental ice-sheet growth. Such a comparison between the simulated SST and ice volume of the Northern Hemisphere has been extended to the whole last glacial-interglacial cycle. The influence of the insolation forcing on SST and the shortcomings of the model due to its zonal character are discussed. Received: 6 July 1995/Accepted: 19 December 1995