The role of marine spatial planning in sea use management: The Belgian case

The expansion of offshore activities and the increasing need to meet international and national commitments to biodiversity conservation have led to an enhanced interest in marine spatial planning (MSP) as a tool for sea use management. Several European countries, on their own initiative or driven by European legislation and policy, have taken global leadership in implementing MSP. This article will discuss the Belgian experiences with MSP. It will give a short historical overview based on legal developments and review the implementation process of a ‘Master Plan’ as a spatial management policy for the Belgian Part of the North Sea. Additionally, this article will reflect on the research that has been done in Belgium to apply a land-use planning approach to the marine environment. The MSP process in Belgium shows that a spatial approach to sea use management is possible despite the lack of a legal zoning framework. However, it concludes that a legal basis for MSP, in addition to the current permit system, would provide a more strategic and integrated framework for ecosystem-based, sea use management.     

Circulation in the Gulf of Aqaba (Red Sea) during winter—spring

This study is devoted to oceanographic features of the semi-enclosed Gulf of Aqaba, Red Sea. The data were recorded in winter—spring 1999 on the R/V Meteor cruise leg 44/2. Temperature and salinity profiles were measured at six positions (I—VI). The shipboard NarrowBand Acoustic Doppler Current Profiler (NB ADCP) 150 kHz continuously recorded current profiles down to 350 m en route. The research revealed that the current near the Strait of Tiran front (position VI) represents a semidiurnal signal of an internal tide wave (∼12 h period; 0.2 ms⁻¹ amplitude) that might be generated by the barotropic tide at the sill of the Strait. A sequence of cyclonic and anticyclonic eddy pairs is found along the axis of the Gulf of Aqaba during winter-spring seasons. These sub-mesoscale signals are dominant above the main thermocline and might be caused by wind forcing and the narrowness of the Gulf; it might remain in other seasons with different dimensions in relation to the depth of thermocline. The total diameter of each pair was twice the baroclinic Rossby radius (R ≈ 10 km). A single anti-cyclonic eddy was observed in the upper 300 m in the northern tip of the Gulf with a diameter of about 5–8 km.     

An optimized method for automated analysis of algal pigments by HPLC

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.     

Analysis of estuarine colour components during non-monsoon period through Ocean Colour Monitor

Simultaneous acquisition of water samples, radiance and irradiance measurements were carried out from 40 stations in the Mandovi–Zuari estuaries during February to May 2002. From the samples collected, inherent and apparent optical properties (IOP and AOP) such as absorption coefficient (a), upwelling diffuse attenuation coefficient (k_u) and subsurface reflectance (R) were derived. Using these optical properties, radiative transfer at each water column is examined. On the basis of the radiative transfer outcome, band-ratio algorithms are derived for three optically active substances (OAS), viz, chlorophyll-a, suspended sediment and coloured dissolved organic matter (CDOM). The respective algorithms are 670/555, 490/670 and 412/670 nm for chlorophyll-a, suspended sediment and CDOM. These algorithms are applied to Ocean Colour Monitor (OCM), onboard Indian Remote Sensing Satellite (IRS)-Polar Satellite Launch Vehicle (P4), scenes (digital data), to synoptically analyze these OAS. The synoptic analysis of OAS revealed different hydrodynamic characteristics of the estuaries during non-monsoon seasons.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Integrating Uncertainty Theories with GIS for Modeling Coastal Hazards of Climate Change

Prediction of coastal hazards due to climate change is fraught with uncertainty that stems from complexity of coastal systems, estimation of sea level rise, and limitation of available data. In-depth research on coastal modeling is hampered by lack of techniques for handling uncertainty, and the available commercial geographical information systems (GIS) packages have only limited capability of handling uncertain information. Therefore, integrating uncertainty theory with GIS is of practical and theoretical significance. This article presents a GIS-based model that integrates an existing predictive model using a differential approach, random simulation, and fuzzy set theory for predicting geomorphic hazards subject to uncertainty. Coastal hazard is modeled as the combined effects of sea-level induced recession and storm erosion, using grid modeling techniques. The method is described with a case study of Fingal Bay Beach, SE Australia, for which predicted responses to an IPCC standard sea-level rise of 0.86 m and superimposed storm erosion averaged 12 m and 90 m, respectively, with analysis of uncertainty yielding maximum of 52 m and 120 m, respectively. Paradoxically, output uncertainty reduces slightly with simulated increase in random error in the digital elevation model (DEM). This trend implies that the magnitude of modeled uncertainty is not necessarily increased with the uncertainties in the input parameters. Built as a generic tool, the model can be used not only to predict different scenarios of coastal hazard under uncertainties for coastal management, but is also applicable to other fields that involve predictive modeling under uncertainty.     

Wave run-up and overtopping on smooth and rough slopes of coastal structures

A series of hydraulic model tests has been carried out in a glass wave flume to investigate the influences of wave height, wave period, wave steepness, surf similarity parameter, roughness, layer thickness and porosity on wave run-up and overtopping of 1:2 sloped impermeable and permeable breakwaters fronted by a 1:10 gentle, smooth beach slope. The analysis of results involves the correlation between the overtopping energy transfer with the relative wall height and the relationship between wave run-up and overtopping rate. Further, measured wave run-up and overtopping rates are compared with the results given in the Shore Protection Manual (1984), Automated Coastal Engineering System (1992)and results of other investigators.     

Biogeochemical impacts due to mesoscale eddy activity in the Sargasso Sea as measured at the Bermuda Atlantic Time-series Study (BATS)

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to assess the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-series Study (BATS) site were used. During the 3 years of this study, four out of six high thorium-234 flux events occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two mode-water eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage of diatoms and dinoflagellates, and in cyclones, which had an increased percentage of Synechococcus. These variations in species composition within mode-water eddies and cyclones may be associated with the ages of the sampled eddies, and/or differences in physical, chemical, and biological factors in these two distinct eddy types. In general, eddies that were 1–2 months old elicited a large biological response; eddies that were 3 months old may show a biological response and were accompanied by high thorium flux; eddies that were 4 months old or older did not show a biological response or high thorium flux. A conceptual model depicting temporal changes during eddy upwelling, maturation, and decay can explain the observations in all seven upwelling eddies present in the time-series investigated herein.     

Modeling of coupled tide–wave–surge process in the Yellow Sea

A coupled wave–tide–surge model has been developed in this study in order to investigate the effect of the interactions among tides, storm surges, and wind waves. The coupled model is based on the synchronous dynamic coupling of a third-generation wave model, WAM cycle 4, and the two-dimensional tide–surge model. The surface stress, which is generated by interactions between wind and wave, is calculated by using the WAM model directly based on an analytical approximation of the results using the quasi-linear theory of wave generation. The changes in bottom friction are created by the interactions between waves and currents and calculated by using simplified bottom boundary layer model. In consequence, the combined wave–current-induced bottom velocity and effective bottom drag coefficient were increased in the shallow waters during the strong storm conditions.     

Spatial patterns and environmental risks of ringnet fishing along the Kenyan coast

Ringnet fishing began in the early 20th century and is practised worldwide, mainly to target nearshore pelagic species. The method was introduced to Kenya’s coastal waters by migrant fishers from Tanzania. However, the impacts of this fishing gear remain poorly assessed. We assessed the spatial distribution of ringnet fishing effort and its possible effects on ecosystem components, such as coral reefs, marine megafauna and marine protected areas, on the south coast of Kenya. We tracked 89 ringnet fishing trips made from December 2015 to January 2016 and used spatial multicriteria analysis to determine hotspots of possible environmental risks. The results showed that habitat type and bathymetric profile influenced the spatial distribution of ringnet fishing effort. Mixed seagrass and coral habitats had the highest concentration of the effort. Most of the habitats in the study area were moderately exposed to the impacts of the ringnet fishery. The study identifies high-risk areas that require spatial measures to minimise possible environmental risks of the gear both to habitats and to endangered sea turtles.