Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Kirsch problem and the lower natural frequencies of a clamped square-plate

A clamped square-plate is subjected to a uniform state of stress in the x-direction. The present study deals with the basic question of determining the variation of the lower natural frequencies of transverse vibration of a plate as a small diameter, central hole is made in it, introducing a stress concentration field.     

The thermohaline fields and currents measured in the sub-arctic frontal zone of the Pacific Ocean

Based on the MEGAPOLYGON data, it is shown that the large-scale elements of the thermohaline structure and the fields of currents in the baroclinic layer (down to 1200 m) are well coordinated. The circulation has a two-layer structure with a transitory layer at a depth of 1200 m. The topography of the isopycnic surface of the layer's core is formed under the influence of small-scale and mesoscale processes which realize the trans-frontal exchange.Translated by Mikhail M. Trufanov.     

Fine vertical structure of currents and hydrological elements in the Black Sea

Data on the fine vertical structure of currents and hydrological elements in the Black Sea, obtained through the use of a hydrophysical OLT profiler, are examined. Vertical exchange coefficients are evaluated, whose distribution is characterized by the occurrence of minima in the seasonal pycnocline and main halocline, a maximum in the core of the cold intermediate layer (CIL), and relatively steady values within the 300–500 m layer. The vertical exchange coefficient values, are consistent with the data acquired through other techniques, and the profiles of this parameter vertically are more detailed.Translated by Vladimir A. Puchkin.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

The near field of internal waves after the moving area of atmospheric pressures

The near wave field generated by the travelling atmospheric pressure zone over a stratified fluid is studied within the framework of the linear theory of long waves allowing for the Coriolis force. The exact solution of the problem as a set of single integrals is deduced for the model distribution of pressures. The characteristics of the near wave field have been computed for the Väisälä-Brunt frequency profile takeu from observations. Their dependences on the geographical latitude and the wave generator travelling rate are analysed.Translated by Mikhail M. Trufanov.     

Submersible observations of an iceberg pit and scour on the Grand Banks of Newfoundland

An elongated sea bed depression (pit), 80 by 125 m and 10 m deep located on the Grand Banks of Newfoundland was identified on high resolution surficial geophysical survey lines and investigated using a manned submersible. The pit occurs at the termination of a long (greater than 3 km) iceberg scour, 1.5 m deep, and 80 m wide in 91 m of water. It is similar to other depressions in the region that indent the sea bed up to seven times deeper than the surrounding deepest iceberg furrows. The pit is interpreted to be the sea bed response to impact and loading by a rolling and grounding iceberg. The iceberg scour and pit appear to be of recent origin.     

Dynamic response of dolos armor units to drop test impact loads

Dolos concrete units have been used extensively throughout the world for the protection of shorelines and rubble structures. A three-dimensional finite element model is used to determine the states of dynamic stress in dolosse with varying dimensions and concrete properties. An analytical procedure is developed which accurately predicts the tensile stress in the shank and horizontal fluke of dolosse subject to drop test loading conditions Numerical examples are presented which illustrate the application of prediction and iso-stress equations.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.