Effects of the orbital eccentricity on the equipotential surfaces in binary systems

In the frame of the elliptical restricted three-body problem, the differential equations for the motion of an infinitesimal body are established. In spite of the lack of Jacobi's integral, for fixed values of the true anomaly (v = 0°, 90°, and 180°), particular results were obtained. The pulsational character of the equipotential surfaces is evident.     

Črna Jama as a cold air trap cave within Postojna Cave,Slovenia

?rna Jama is the coldest section of cave within the Postojna Cave System. Mean annual air temperatures at the ?rna Jama 2 site are 5.6 °C (2015) and 5.7 °C (2016), and at the ?rna Jama 3 site 7.1 °C (2015) and 7.2 (2016), whereas the mean external air temperature was 10.3 °C (2015) and 10.0 °C (2016). In Lepe Jame, the passage most heavily visited by tourists, the mean cave-air temperature is 10.7 °C (2014–2017). ?rna Jama exhibits winter and summer temperature regimes. During warm periods (T_cave < T_out), it acts as a cold air trap, exchanging no air with the outside atmosphere. Under such conditions the cave-air temperature shows no short-term diurnal temperature oscillations. Cave-air temperature is significantly stable and affected only by elevation of the groundwater table, which is associated with precipitation. During cold periods (T_cave > T_out), ventilation takes place and dense, cold, outside air sinks into ?rna Jama because of the favourable cave entrance morphology. Recent ?rna Jama air temperature data (2014–2017) indicate a < 0.5 °C higher temperature than that recorded in historical data since 1933. ?rna Jama is the most appropriate place within the Postojna Cave System to study long-term climatic changes. There are hardly any tourist visits to the cave, and human impacts on the cave climate are essentially reduced.     

Combined tectonic-sediment supply-driven cycles in a Lower Carboniferous deep-marine foreland basin,Moravice Formation,Czech Republic

The Lower Carboniferous Moravian–Silesian Culm Basin (MSCB) represents the easternmost part of the Rhenohercynian system of collision-related, deep-water foreland basins (Culm facies). The Upper Viséan Moravice Formation (MF) of the MSCB shows a distinct cyclic stratigraphic arrangement. Two major asymmetric megacycles bounded by basal sequence boundary, each about 500 to 900 m thick, have been revealed. The megacycles start with 50- to 250-m-thick, basal segments of erosive channels: overbank successions and slope apron deposits interpreted as lowstand turbidite systems. Up-section they pass into hundred metre-thick, fine-grained, low-efficiency turbidite systems. Palaeocurrent data show two prominent directions, basin axis-parallel, SSW–NNE directions, which are abundant in the whole MF, and basin axis-perpendicular to oblique, W–E to NW–SE directions, which tend to be confined to the basal parts of the megacycles or channel-lobe transition systems in their upper parts. Based on the facies characteristics, palaeocurrent data, sandstone composition data and trace-fossil distribution data, we suggest a combined tectonics–sediment supply-driven model for the MF basin fill. Periods of increased tectonic activity resulted in slope oversteepening probably combined with increased rate of lateral W–E sediment supply into the basin, producing the basal sequence boundary and the subsequent lowstand turbidite systems. During subsequent periods of tectonic quiescence, the system was filled mainly from a distant southern point source, producing the thick, low efficiency turbidite systems. Consistently with the previous models, our own sediment composition data indicate a progressively increasing sediment input from high-grade metamorphic and magmatic sources up-section, most probably related to an uplift in the source area and progressive unroofing of its structurally deeper crustal parts. The first occurrence of the Cruziana–Nereites ichnofacies in sand-rich turbidite systems in the youngest parts of the MF (Goel to Gospi Zone), supported by rapidly increasing quartz concentrations in sandstones, is thought to indicate a transition from generally underfilled to generally overfilled phase in evolution of the MSCB basin. This transition may be linked to the onset of Upper Viséan phase of northward basin-fill progradation assumed by previous authors.     

Local deformation monitoring using GPS in an open pit mine: initial study

High-performance GPS RTK software has been developed within the Geodetic Research Laboratory (GRL) at the University of New Brunswick (UNB). This software was initially designed for gantry crane auto-steering. Due to limitations with classical geodetic deformation monitoring techniques, the Canadian Centre for Geodetic Engineering (CCGE) at UNB has decided to augment its fully automated deformation monitoring system with GPS. As a result, the GRL and CCGE have combined efforts to achieve the required precision. As a first step, tests of the GPS real-time kinematic (RTK) software have been carried out at Highland Valley Copper Mine in British Columbia, Canada. An open-pit mine environment places certain constraints on the achievable accuracies attainable with GPS. Consequently, the software has been modified to meet the needs of this particular project and data have been post-processed for analysis. This paper describes the approach taken at UNB to address high precision requirements in a constrained signal availability environment. Technical and scientific aspects of the UNB software, especially in handling two predominant errors (residual tropospheric zenith delay and multipath) at the mine, are discussed. Results of tests that have been carried out at the mine are presented.     

Emission sources and health risk assessment of polycyclic aromatic hydrocarbons in ambient air during heating and non-heating periods in the city of Novi Sad,Serbia

The paper presents the assessment of emission sources and health risk of 16 PAHs in the city of Novi Sad, Serbia, with developed oil, food, chemical and cement industry. Although the observed region has been previously studied with regard to the occurrence of PAHs in ambient air, the sources of emission and health risk using multivariate statistical methods have never been studied before. The research was conducted during the heating and non-heating periods at three sampling sites located in industrial, residential and high-traffic area. The samples were collected by high-volume air sampler and analysed using the GC/MS system. The data were processed using the positive matrix factorization (PMF) and cluster analysis. To assess the cancer-risk of PAHs, potency equivalency factor approach was used. The results of PMF analysis have indicated that significant sources of PAH emissions are industrial processes and diesel combustion during the non-heating, and coal combustion, heating plants and diesel combustion during the heating season. Cluster analysis of experimental data has confirmed the results obtained using the PMF method. Estimated values of lifetime lung cancer risk were higher than those set by the World Health Organization and US Environmental Protection Agency which indicates that cancer risk due to exposure to PAHs in ambient air exists in both time periods on the territory of Novi Sad.     

Analysis of Ezinepazarı–Sungurlu Fault Zone (Turkey) using Landsat TM data and its kinematic implications

The study area is located between Çorum and Amasya along the Ezinepazar?–Sungurlu Fault Zone (ESFZ) which is regarded as the splay of the North Anatolian Fault Zone (NAFZ). By this study, the 1/25,000 scaled geological map of the study area was prepared, and its stratigraphic and tectonic characteristics were unraveled as a result of palaeontological and petrographical analyses of the samples collected from different rock units. Particularly, geologic ages of the Late Jurassic–Early Cretaceous Ferhatkaya and Carcurum and Middle Eocene Çekerek formations were provided from palaeontological determinations. Using Landsat TM and Shuttle Radar Topography Mission 3 (SRTM 3) data of the region, the borders between the rock units and the tectonic characteristics in the study area were clarified by spectral and spatial enhancement methods. Kinematic characteristics of ESFZ obtained from the young sedimentary rocks along both sides of the fault zone were also inferred in this study. Understanding the kinematic and geometrical characteristics of the faults is important in terms of the seismotectonics of the region. In the statistical study conducted on the basis of the directions of the lineaments indicates the highest concentrations in general between N 50° - 60° E and N 60° - 70° E. Band 7 of the study area was enlightened in SE direction taking into consideration the relation of the geologic structures in the region with NAFZ and ESFZ and their general strike directions. Along with the formation of NAFZ, the region has undergone a counterclockwise rotation of approximately 20°–30°, which has developed between the “splay” faults in the south block of that fault. These faults are strike-slip faults formed under the compressional regime roughly in a NW–SE direction. It is noted that this tectonic regime has developed under compression in NW–SE direction, which was dominant in similar kinematic analysis studies conducted on NAFZ.     

Provenance of Oligocene lithic and quartz arenites of the East Carpathians: Understanding sediment routing systems on compressional basin margins

We present new sedimentological, petrographical, palaeontological and detrital zircon U–Pb data on late Oligocene–early Miocene sedimentary rocks of the thin-skinned thrust belt of East Carpathians. These data were acquired to reconstruct the sedimentary routing system for two compositionally different turbidite fans made of the regionally extensive Kliwa and Fusaru formations. On the eastern margin of the Moldavides foreland basin, large low-gradient river systems draining the East European Platform provided well-sorted quartz-rich sand forming deltas on wide shallow shelves and thick Kliwa submarine fans. Due to the westward subduction of a thinned continental plate, the western basin margin was characterized by short, steep-gradient routing systems where sediment transport to deep water was mainly through hyperpycnal flows. The Getic and Bucovinian nappes of the East Carpathians and the exhumed Cretaceous–Early Palaeogene orogenic wedge fed Fusaru fans with poorly sorted lithic sand. The Fusaru fans trend northwards in the foredeep basin having an elongate depocentre, interfingering and then overlapping on the distal part of the Kliwa depositional system due to the eastward advance of the Carpathian fold-and-thrust belt. A smaller sediment input is supplied by southern continental areas (i.e. Moesian Platform, North Dobrogea and potentially the Balkans). In general, the sandstone interfingering between distinct basin floor fan systems is less well documented because the facies would be similar and there are not many systems that have a distinct sediment provenance like Kliwa and Fusaru systems. This case study improves the understanding of regional palaeogeography and sedimentary routing systems and provides observations relevant here or elsewhere on the interfingering turbidite fan systems.     

Potential for growing Arabica coffee in the extreme south of Brazil in a warmer world

Agriculture appears to be one of the human activities most vulnerable to climatic changes due to its large dependence on environmental conditions. However, the diversity of Brazilian environmental conditions could be of great advantage to adapting this sector to new climatic conditions, which should be assessed as in this study on shifting Arabica coffee cultivation to the extreme south of the country. The methodology applied is the same the one used to define climatic risks in current productive regions of Brazil and their vulnerability to climatic change predicted by IPCC reports. The basic climatic parameters applied were frost probability and annual average temperature, since annual water deficit did not prove to be a restricting factor for Arabica coffee cultivation in the study area. The climatic conditions suitable for coffee production are: annual average temperature between 18??C and 22??C, annual water deficit less than 100?mm and frost probability (risk of lowest annual temperature less than 1??C) less than 25%. An area is said to have ??low climatic risks?? for coffee production when these three climatic conditions are met. Current climatic conditions were used and simulations of four temperature increases between 1??C and 4??C were also performed. The results indicated a substantial increase in the size of low climatic risks areas for the production of Arabica coffee in the extreme south of Brazil, mainly for mean temperature increases of 3??C in the study area in relation to present conditions. Increases of 2??C and 4??C were also favorable, but not as good as those obtained for 3??C. It should be underscored that areas with low climatic risks will be able to be found mainly in the extreme south of the study region, the border with Uruguay and North of Argentina.     

Melt inclusion constraints on petrogenesis of the 2014–2015 Holuhraun eruption,Iceland

The 2014–2015 Holuhraun eruption, on the Bárðarbunga volcanic system in central Iceland, was one of the best-monitored basaltic fissure eruptions that has ever occurred, and presents a unique opportunity to link petrological and geochemical data with geophysical observations during a major rifting episode. We present major and trace element analyses of melt inclusions and matrix glasses from a suite of ten samples collected over the course of the Holuhraun eruption. The diversity of trace element ratios such as La/Yb in Holuhraun melt inclusions reveals that the magma evolved via concurrent mixing and crystallization of diverse primary melts in the mid-crust. Using olivine–plagioclase–augite–melt (OPAM) barometry, we calculate that the Holuhraun carrier melt equilibrated at 2.1?±?0.7 kbar (7.5?±?2.5 km), which is in agreement with the depths of earthquakes (6?±?1 km) between Bárðarbunga central volcano and the eruption site in the days preceding eruption onset. Using the same approach, melt inclusions equilibrated at pressures between 0.5 and 8.0 kbar, with the most probable pressure being 3.2 kbar. Diffusion chronometry reveals minimum residence timescales of 1–12 days for melt inclusion-bearing macrocrysts in the Holuhraun carrier melt. By combining timescales of diffusive dehydration of melt inclusions with the calculated pressure of H₂O saturation for the Holuhraun magma, we calculate indicative magma ascent rates of 0.12–0.29 m s^?1. Our petrological and geochemical data are consistent with lateral magma transport from Bárðarbunga volcano to the eruption site in a shallow- to mid-crustal dyke, as has been suggested on the basis of seismic and geodetic datasets. This result is a significant step forward in reconciling petrological and geophysical interpretations of magma transport during volcano-tectonic episodes, and provides a critical framework for the interpretation of premonitory seismic and geodetic data in volcanically active regions.     

Geochronological (U–Pb,U–Th–total Pb,Sm–Nd) and geochemical (REE, <Superscript>87</Superscript>Sr/<Superscript>86</Superscript>Sr, δ<Superscript>18</Superscript>O, δ<Superscript>13</Superscript>C) tracing of intraplate tectonism and associated fluid flow in the Warburton Basin,Australia

The Warburton Basin of central Australia has experienced a complex tectonic and fluid-flow history, resulting in the formation of various authigenic minerals. Geochemical and geochronological analyses were undertaken on vein carbonates from core samples of clastic sediments. Results were then integrated with zircon U–Pb dating and uraninite U–Th–total Pb dating from the underlying granite. Stable and radiogenic isotopes (δ¹⁸O, Sr and εNd), as well as trace element data of carbonate veins indicate that >200 °C basinal fluids of evolved meteoric origin circulated through the Warburton Basin. Almost coincidental ages of these carbonates (Sm–Nd; 432 ± 12 Ma) with primary zircon (421 ± 3.8 Ma) and uraninite (407 ± 16 Ma) ages from the granitic intrusion point towards a substantial period of active tectonism and an elevated thermal regime during the mid Silurian. We hypothesise that such a thermal regime may have resulted from extensional tectonism and concomitant magmatic activity following regional orogenesis. This study shows that the combined application of geochemical and geochronological analyses of both primary and secondary species may constrain the timing of tectonomagmatic events and associated fluid flow in intraplate sedimentary basins. Furthermore, this work suggests that the Sm–Nd-isotopic system is surprisingly robust and can record geologically meaningful age data from hydrothermal mineral species.