Geomorphometry from unmanned aerial surveys

Unmanned aerial systems (UASs) are widely used for remote sensing, including the production of high‐resolution digital elevation models (DEMs). We study the possibilities of UAS‐based aerial surveys to produce photogrammetrically sound, high‐resolution DEMs intended for geomorphometric modeling. The study was conducted at the Zaoksky testing ground (Russia). To carry out an aerial survey, we used a UAS Geoscan‐101 equipped with a Sony DSC‐RX1 camera and a Topcon GNSS receiver. Aerial photographs were processed using Agisoft PhotoScan Professional software. Applying dense point cloud generation and classification, we produced DEMs with resolutions of 6 cm, 20 cm, and 1 m. Using a universal spectral analytical method, we derived models of several morphometric variables (i.e., slope gradient, horizontal, vertical, minimal, and maximal curvatures) from DEMs with resolutions of 20 cm and 1 m. We found that it is possible to produce noiseless models and well‐readable maps of morphometric variables for grassy areas with separately standing groups of trees and shrubs. However, UAS‐based DEMs cannot be applied for modeling of forested areas: there occur pronounced unrecoverable artifacts due to errors of automated classification of the dense point cloud. Finally, we present recommendations for the production of UAS‐derived, photogrammetrically sound, high‐resolution DEMs intended for geomorphometry.     

New iron resources of the South Urals

An area with brick-red loose and viscous sandy-clayey rocks and brown ores with an average Fe content of 19.84% and possible resources of 1 billion tons of metal was determined. Mn and Ti are the main alloying components; Ni, Co, Cr, V, and Zr are additional; and goethite (FeOOH) is an ore mineral.     

Active Region Formation through the Negative Effective Magnetic Pressure Instability

The negative effective magnetic-pressure instability operates on scales encompassing many turbulent eddies, which correspond to convection cells in the Sun. This instability is discussed here in connection with the formation of active regions near the surface layers of the Sun. This instability is related to the negative contribution of turbulence to the mean magnetic pressure that causes the formation of large-scale magnetic structures. For an isothermal layer, direct numerical simulations and mean-field simulations of this phenomenon are shown to agree in many details, for example the onset of the instability occurs at the same depth. This depth increases with increasing field strength, such that the growth rate of this instability is independent of the field strength, provided the magnetic structures are fully contained within the domain. A linear stability analysis is shown to support this finding. The instability also leads to a redistribution of turbulent intensity and gas pressure that could provide direct observational signatures.     

Eigenrays in 3D heterogeneous anisotropic media,Part II: Dynamics

This paper is the second in a sequel of two papers and dedicated to the computation of paraxial rays and dynamic characteristics along the stationary rays obtained in the first paper. We start by formulating the linear, second‐order, Jacobi dynamic ray tracing equation. We then apply a similar finite‐element solver, as used for the kinematic ray tracing, to compute the dynamic characteristics between the source and any point along the ray. The dynamic characteristics in our study include the relative geometric spreading and the phase correction due to caustics (i.e. the amplitude and the phase of the asymptotic form of the Green's function for waves propagating in 3D heterogeneous general anisotropic elastic media). The basic solution of the Jacobi equation is a shift vector of a paraxial ray in the plane normal to the ray direction at each point along the central ray. A general paraxial ray is defined by a linear combination of up to four basic vector solutions, each corresponds to specific initial conditions related to the ray coordinates at the source. We define the four basic solutions with two pairs of initial condition sets: point–source and plane‐wave. For the proposed point–source ray coordinates and initial conditions, we derive the ray Jacobian and relate it to the relative geometric spreading for general anisotropy. Finally, we introduce a new dynamic parameter, similar to the endpoint complexity factor, presented in the first paper, used to define the measure of complexity of the propagated wave/ray phenomena. The new weighted propagation complexity accounts for the normalized relative geometric spreading not only at the receiver point, but along the whole stationary ray path. We propose a criterion based on this parameter as a qualifying factor associated with the given ray solution. To demonstrate the implementation of the proposed method, we use several isotropic and anisotropic benchmark models. For all the examples, we first compute the stationary ray paths, and then compute the geometric spreading and analyse these trajectories for possible caustics. Our primary aim is to emphasize the advantages, transparency and simplicity of the proposed approach.     

Use of a High-Resolution Sodar to Study Surface-layer Turbulence at Night

Measurements in the atmospheric surface layer are generally made with point sensors located in the first few tens of metres. In most cases, however, these measurements are not representative of the whole surface layer. Standard Doppler sodars allow a continuous display of the turbulent thermal structure and wind profiles in the boundary layer up to 1000 m, with a few points, if any, in the surface layer. To overcome these limitations a new sodar configuration is proposed that allows for a higher resolution in the surface layer. Because of its capabilities (echo recording starting at 2 m, echo intensity vertical resolution of approximately 2 m, temporal resolution of 1 s) this sodar is called the surface-layer mini-sodar (SLM-sodar). Features and capabilities of the SLM-sodar are described and compared with the sodar. The comparison of the thermal vertical structure given by the SLM-sodar and the sodar provides evidence that, in most cases, the surface layer presents a level of complexity comparable to that of the entire boundary layer. Considering its high vertical resolution, the SLM-sodar is a promising system for the study of the nocturnal surface layer. The nocturnal SLM-sodar measurements have shown that, depending on wind speed, the structure of the surface layer may change substantially within a short time period. At night, when the wind speed is greater than 3 m s⁻¹, mechanical mixing destroys the wavy structure present in the nocturnal layer. Sonic anemometer measurements have shown that, in such cases, also the sensible heat flux varies with height, reaching a peak in correspondence with the wind speed peak. Under these conditions the assumption of horizontal homogeneity of the surface layer and the choice of the averaging time need to be carefully treated.     

Determining the main atmospheric factor on ozone concentrations

This paper presents techniques for studying the influence of the atmospheric variables for the explanation of ozone concentrations. A methodology is described for separating the different time scale components in time series of ozone, namely, the global-term component which describes the long and seasonal variations, and the synoptic-scale component. We prove that the decomposition of the time series of ozone and other atmospheric variables is essential for the analysis. The results indicate that solar radiation is the only main factor between all the atmospheric variables for the global and the synoptic-scale component of the ozone time series. Most of the total variance of ozone can be explained by the atmospheric variables, which makes possible the precise estimation of human effect on ozone. In case the solar radiation data are not available, lagged temperature can be used as a supplement of solar radiation.     

Irrigated afforestation of the Sahara and Australian Outback to end global warming

Each year, irrigated Saharan- and Australian-desert forests could sequester amounts of atmospheric CO₂ at least equal to that from burning fossil fuels. Without any rain, to capture CO₂ produced from gasoline requires adding about $1 to the per-gallon pump-price to cover irrigation costs, using reverse osmosis (RO), desalinated, sea water. Such mature technology is economically competitive with the currently favored, untested, power-plant Carbon Capture (and deep underground, or under-ocean) Sequestration (CCS). Afforestation sequesters CO₂, mostly as easily stored wood, both from distributed sources (automotive, aviation, etc., that CCS cannot address) and from power plants. Climatological feasibility and sustainability of such irrigated forests, and their potential global impacts are explored using a general circulation model (GCM). Biogeophysical feedback is shown to stimulate considerable rainfall over these forests, reducing desalination and irrigation costs; economic value of marketed, renewable, forest biomass, further reduces costs; and separately, energy conservation also reduces the size of the required forests and therefore their total capital and operating costs. The few negative climate impacts outside of the forests are discussed, with caveats. If confirmed with other GCMs, such irrigated, subtropical afforestation probably provides the best, near-term route to complete control of green-house-gas-induced, global warming.     

ERA-40-aided assessment of the atmospheric influence on satellite retrieval of Adriatic Sea surface temperature

The aim of this work is assessment of regional atmospheric influence on satellite derivation of Adriatic Sea surface temperature (SST). To this end the European Centre for Medium-Range Weather Forecast (ECMWF) ERA-40 reanalysis dataset has been employed to provide the temperature and humidity profiles and surface data, while the RTTOV 8.7 radiative transfer model was used to calculate the top-of-atmosphere brightness temperatures for the advanced very high-resolution radiometer (AVHRR) channels. Ten ERA-40 grid points over the Adriatic Sea were used in the analysis, providing 29,590, 00 UTC and 12 UTC, clear-sky profiles. Climatological analysis of the ERA-40 profiles demonstrated distinct seasonal variability over the Adriatic Sea. Seasonality noted in the temperature and specific humidity profiles also evinced in the atmospheric transmittance, thermal channels temperature deficit, and derived γ and ρ parameters. A multivariate analysis was applied to relate the simulated top-of-atmosphere brightness temperatures to the Adriatic SSTs in order to generate exploratory sets of SST retrieval coefficients. All derived coefficient sets exhibited smaller noise amplification factor than the global counterpart. A test comparison of satellite-derived SST with an 11-month in situ SST series showed than locally derived coefficients provide smaller scatter (improved precision), and skin-centred bias that requires additional adjustment. Almost identical SST residual and error metric was obtained with seasonally adjusted classical split-window coefficients and with coefficients explicitly accommodating water-vapor dependence. Comparison with data reinforces the notion that the atmosphere over the Adriatic may exhibit variability that cannot be fully accommodated by globally adjusted correction.     

Geo–ecology and management of sensitive montane landscapes

Montane (alpine) areas are generally of high value for nature conservation. Such environments and the habitats they support are dynamic and often fragile. They are vulnerable to disturbance from a range of human activities and are responsive to climate changes over short and long timescales. Biodiversity and conservation values are closely linked to geological history, geomorphological processes and soils, and it is crucial that management systems are based on understanding these links.
There are many similarities between the Cairngorm Mountains (Scotland), the Giant Mountains (Czech Republic) and Abisko Mountains (Sweden) in terms of geology, geomorphology, ecology, links with biodiversity and high conservation importance. Comparable pressures and management issues involve, to varying degrees, a history of human use and impacts from deforestation, pasturing, grazing, recreation and atmospheric pollution. Landscape change therefore involves a complex interplay between natural and anthropogenic factors. Managing such change requires better understanding of the geo–ecological processes involved and the factors that determine landscape sensitivity. This is illustrated through a simple framework and examples from the three areas. Comparison of landscape sensitivity between similar montane areas, but in different geographic locations and climatic environments, should allow more informed management planning and a precautionary approach in advance of further changes in human activity and from predicted global warming scenarios.     

Current estimates of freshwater flux through Arctic and subarctic seas

As the world warms, the expectation is that the freshwater outflows from the Arctic Ocean to the North Atlantic will strengthen and may act to suppress the rate of the climatically-important Atlantic meridional overturning circulation. Hitherto, however, we have lacked the system of measurements required to estimate the totality of the freshwater flux through subarctic seas. Though observations remain patchy and rudimentary in places, we piece-together the results from recent large-scale observational programmes together with associated modelling, to establish preliminary maps of the rates and pathways of freshwater flux through subarctic seas. These fluxes are calculated according to two reference salinities, S = 34.8 to conform with the majority of estimates reported in the literature, and S = 35.2, the salinity of the inflowing Atlantic water, to calculate the freshwater balance of the ‘Arctic Mediterranean’. We find that 148 mSv of freshwater enters the Nordic Seas across its northern boundary. There it is supplemented by around 54 mSv of freshwater from Baltic runoff, Norwegian runoff, P − E and Greenland ice melt, so that the total freshwater contribution to the Nordic Seas from all sources is 202 mSv. Of this, around 51 mSv of freshwater is estimated to pass south to the deep Atlantic in the dense water overflows leaving an assumed balance of 151 mSv to leave the Nordic Seas in the upper water export through Denmark Strait. The corresponding estimate for the freshwater outflow west of Greenland is 103 mSv relative to 35.2 so that the total freshwater flux reaching the North Atlantic through subarctic seas is around 300 mSv.