Sulfur isotope fractionation during bacterial sulfate reduction in organic-rich sediments

Isotope fractionation during sulfate reduction by natural populations of sulfate-reducing bacteria was investigated in the cyanobacterial microbial mats of Solar Lake, Sinai and the sediments of Logten Lagoon sulfuretum, Denmark. Fractionation was measured at different sediment depths, sulfate concentrations, and incubation temperatures. Rates of sulfate reduction varied between 0.1 and 37 micromoles cm-3 d-1, with the highest rates among the highest ever reported from natural sediments. The depletion of 34S during dissimilatory sulfate reduction ranged from 16% to 42%, with the largest 34S-depletions associated with the lowest rates of sulfate reduction and the lowest 34S-depletions with the highest rates. However, at high sulfate reduction rates (>10 micromoles cm-3 d-1) the lowest fractionation was 20% independent of the rates. Overall, there was a similarity between the fractionation obtained by the natural populations of sulfate reducers and previous measurements from pure cultures. This was somewhat surprising given the extremely high rates of sulfate reduction in the experiments. Our results are explained if we conclude that the fractionation was mainly controlled by the specific rate of sulfate reduction (mass cell-1 time-1) and not by the absolute rate (mass volume-1 time-1). Sedimentary sulfides (mainly FeS2) were on average 40% depleted in 34S compared to seawater sulfate. This amount of depletion was more than could be explained by the isotopic fractionations that we measured during bacterial sulfate reduction. Therefore, additional processes contributing to the fractionation of sulfur isotopes in the sediments are indicated. From both Solar Lake and Logten Lagoon we were able to enrich cultures of elemental sulfur-disproportionating bacteria. We suggest that isotope fractionation accompanying elemental sulfur disproportionation contributes to the 34S depletion of sedimentary sulfides at our study sites.     

The Ms = 6.2, June 15, 1995 Aigion earthquake (Greece): evidence for low angle normal faulting in the Corinth rift

We present the results of a multidisciplinary study of the M_s = 6.2, 1995, June 15, Aigion earthquake (Gulf of Corinth, Greece). In order to constrain the rupture geometry, we used all available data from seismology (local, regional and teleseismic records of the mainshock and of aftershocks), geodesy (GPS and SAR interferometry), and tectonics. Part of these data were obtained during a postseismic field study consisting of the surveying of 24 GPS points, the temporary installation of 20 digital seismometers, and a detailed field investigation for surface fault break. The Aigion fault was the only fault onland which showed detectable breaks (< 4 cm). We relocated the mainshock hypocenter at 10 km in depth, 38 ° 21.7 N, 22 ° 12.0 E, about 15 km NNE to the damaged city of Aigion. The modeling of teleseismic P and SH waves provides a seismic moment M_o = 3.4 10¹⁸ N.m, a well constrained focal mechanism (strike 277 °, dip 33 °, rake – 77°), at a centroidal depth of 7.2 km, consistent with the NEIC and the revised Harvard determinations. It thus involved almost pure normal faulting in agreement with the tectonics of the Gulf. The horizontal GPS displacements corrected for the opening of the gulf (1.5 cm/year) show a well-resolved 7 cm northward motion above the hypocenter, which eliminates the possibility of a steep, south-dipping fault plane. Fitting the S-wave polarization at SERG, 10 km from the epicenter, with a 33° northward dipping plane implies a hypocentral depth greater than 10 km. The north dipping fault plane provides a poor fit to the GPS data at the southern points when a homogeneous elastic half-space is considered: the best fit geodetic model is obtained for a fault shallower by 2 km, assuming the same dip. We show with a two-dimensional model that this depth difference is probably due to the distorting effect of the shallow, low-rigidity sediments of the gulf and of its edges. The best-fit fault model, with dimensions 9 km E–W and 15 km along dip, and a 0.87 m uniform slip, fits InSAR data covering the time of the earthquake. The fault is located about 10 km east-northeast to the Aigion fault, whose surface breaks thus appears as secondary features. The rupture lasted 4 to 5 s, propagating southward and upward on a fault probably outcropping offshore, near the southern edge of the gulf. In the shallowest 4 km, the slip – if any – has not exceeded about 30 cm. This geometry implies a large directivity effect in Aigion, in agreement with the accelerogram aig which shows a short duration (2 s) and a large amplitude (0.5 g) of the direct S acceleration. This unusual low-angle normal faulting may have been favoured by a low-friction, high pore pressure fault zone, or by a rotation of the stress directions due to the possible dip towards the south of the brittle-ductile transition zone. This fault cannot be responsible for the long term topography of the rift, which is controlled by larger normal faults with larger dip angles, implying either a seldom, or a more recently started activity of such low angle faults in the central part of the rift.     

Investigation by backscatter radar of artificial irregularities produced in ionospheric plasma heating experiments

The artificial ionospheric turbulence occurs in the ionosphere illuminated by high power HF radio waves. There are a lot of irregularities stretched along the geomagnetic field in this region. The investigation of the artificially disturbed ionospheric region is based on the reception of back scattered signals (BSS) which permits the basic parameters of this region to be estimated and its inhomogeneous structure to be described.Experiments were carried out using ‘Sura’ heating facility in the frequency range of ? = 4.7–9 MHz (ordinary mode) with the effective radiated power P_eff = 50–70 MW beamed vertically upwards. The most important dynamic and statistical BSS characteristics (the built-up time, the relaxation and autocorrelation times, the BSS amplitude spatial correlation function and power spectra) were measured using probe waves in the frequency range of that made it possible to obtain the basic parameters of the artificial irregularities. The model representation of a disturbed region in a form of a periodic structure gives a possibity to evaluate the scale of the structure, the whole size of the disturbance and its power and to calculate the main BSS characteristics.     

Geology of the volcanic-hosted Brockman rare-metals deposit,Halls Creek Mobile Zone,northwest Australia. l. Volcanic environment,geochronology and petrography of the Brockman volcanics

Summary Rare-metals mineralization of the Brockman deposit (Halls Creek Mobile Zone, NW Australia) is hosted in a fluorite-bearing, rhyolitic volcaniclastic unit informally termed the Niobium Tuff. The Tuff, more correctly described as a tuffaceous volcaniclastic deposit, is the lowermost unit of a sequence of trachyte-to-rhyolite lavas, trachyandesite subvolcanic rocks, and volcaniclastic units of the Brockman volcanics located within the Halls Creek Group, a thick, early Proterozoic volcano-sedimentary sequence. High precision SHRIMP ion-microprobe zircon dating of the Niobium Tuff gives an eruption age of 1870 ± 4 Ma. Regional geochronological constraints indicate the Niobium Tuff was deposited about 15 Ma before major orogenic activity affected the area. Despite folding, faulting and low-grade metamorphism, the Brockman volcanics show excellent preservation of primary volcanological features, including pillow-lavas and pillow-breccias, that suggest a dominantly subaqueous, below-wave-base emplacement environment. The style of eruption products and magma volume constraints suggest the trachyte-dominated volcanics were erupted from a small shield volcanic complex probably in a rift-related basin in a shallow-marine setting. The tectonic setting was intraplate but differs from most Tertiary to recent trachyte volcanic complexes which are largely subaerial, are built on relatively thick continental crust, and show no post-eruptive orogenic history. Brockman-style rare-metal deposits are characterized by preservation of subaqueous volcanics beneath a thick sedimentary sequence, eruption of early incompatible-element enriched products followed by less differentiated magmas, and fine-grained mineralogy influenced by alteration processes. Prospects exist for discovery of analogous deposits, particularly in early Proterozoic mobile belts and Tertiary intraplate shield volcanic provinces.

---

Geologie der an Vulkanite gebundenen Seltene-Metalle-Lagerstätte Brockman, Halls Creek Mobile Zone, Nordwest-Australien. I. Vulkanologie, Geochronologie und Petrographie der Brockman-Vulkanite

Zusammenfassung Selten-Metall-Vererzung der Brockman-Lagerstätten (Halls Creek Mobile Zone, NW Australien) sitzt in einer Fluorit-führenden, rhyolitischen vulkanoklastischen Einheit auf, die informell als der Niob-Tuff bezeichnet wird. Es handelt sich hier um ein vulkanoklastisches Tuff-Sediment; dieses ist die unterste Einheit einer Abfolge vor Trachyt bis Rhyolit-Laven, trachyandesitischen Subvulkaniten and vulkanoklastischen Einheiten der Brockman Vulkanite innerhalb der Halls Creek Gruppe, einer mächtigen frühproterozoischen vulkanosedimentdren Abfolge. Prüzisionsdatierungen des Niob Tuffs mit der SHRIMP Ionen-Mikrosonde ergeben ein Eruptionsalter von 1870 +-4 Millionen Jahren. Regionale geochronologische Zusammenhänge zeigen, daß der Niob Tuff etwa 15 Millionen Jahre vor einer größeren Orogenese, die das Gebiet betroffen hat, abgelagert wurde. Trotz Faltung, Bruchtektonik and niedriggradiger Metamorphose zeigen die Brockman-Vulkanite einen hervorragenden Erhaltungszustand primärer vulkanologischer Erscheinungen. Diese urnfassen auch Kissenlaven und KissenBreckzien, die eine vorwiegend subaquatische Ablagerung in ruhigem Wasser erkennen lassen. Die Art der Eruptionsprodukte and das Magmavolumen zeigen, daß die Trachytdominierten Vulkanite von einem kleinen Schildvulkan stammer, wahrscheinlich in einem Becken in einer Rift-Situation im seichten marinen Milieu. Die tektonische Situation war intraplate, aber unterscheidet sich von den meisten tertiären bis rezenten trachytischen Vulkan-Komplexen, die hauptsächlich subaerisch sind, auf einer relativ mächtigen kontinentalen Kruste aufsitzen, and keine post-eruptive orogene Entwicklung zeigen. Seltene-Metalle-Lagerstatten des Brockman-Typs rind durch die Erhaltung subaquatischer-Vulkanite unterhalb einer machtigen sedimentdren Abfolge gekennzeichnet; welters durch frühe Eruptionsprodukte, die an inkompatiblen Elementen angereichert sind, auf die dann weniger differenzierte Magmen folgten, und schließlich durch einen feinkörnigen Mineralbestand, der vor Umwandlungsprozessen betroffen war. Es besteht die Möglichkeit der Entdeckung analoger Lagerstätten, besonders in frühproterozoischen mobilen Gürteln und in tertidren intraplate Schildvulkan Provinzen.

---

---

With 5 Figures

---

Deceased     

Probabilistic seismic hazard zonation of Syria

Earthquake hazard maps for Syria are presented in this paper. The Peak Ground Acceleration (PGA) and the Modified Mercalli Intensity (MMI) on bedrock, both with 90% probability of not being exceeded during a life time of 50, 100 and 200 years, respectively are developed. The probabilistic PGA and MMI values are evaluated assuming linear sources (faults) as potential sources of future earthquakes. A new attenuation relationship for this region is developed. Ten distinctive faults of potential earthquakes are identified in and around Syria. The pertinent parameters of each fault, such as theb-parameter in the Gutenberg-Richter formula, the annual rate ₄ and the upper bound magnitudem ₁ are determined from two sets of seismic data: the historical earthquakes and the instrumentally recorded earthquake data (AD 1900–1992). The seismic hazard maps developed are intended for preliminary analysis of new designs and seismic check of existing civil engineering structures.     

Organic contaminants and characteristics of sediments from Oso Bay,south Texas,USA

The Oso Bay, Texas, sediments from nine sites were analyzed by GC-MS for organics to measure contamination in the bay. In most of the sites sediments contained tetrachloroethene (87–1433 g/kg), bis (2-ethylhexyl)phthalate (40–193 g/kg), and aliphatic hydrocarbons, C₈-C₁₃ (720–2491 g/kg). Sources of these contaminants include a landfill, military facilities, and municipal and industrial discharges. Size analysis of the sediments indicates they contain a high percentage of muddy sand (50–75 percent), which suggests that Oso Bay consists of common bay margin sediments.     

Channel overflows of the Pōhue Bay flow,Mauna Loa,Hawai'i: examples of the contrast between surface and interior lava

A number of overflows from a large lava channel and tube system on the southwest rift zone of Mauna Loa were studied. Initial overflows were very low viscosity gas-rich phoehoe evidenced by flow-unit aspect ratios and vesicle sizes and contents. Calculated volumetric flow-rates in the channel range between 80 and 890 m³/s, and those of the overflows between 35 and 110 m³/s. After traveling tens to hundreds of meters the tops of these sheet-like overflows were disrupted into a surface composed of clinker and phoehoe fragments. After these 'a' overflows came to rest, lava from the interiors was able to break out on to the surface as phoehoe. The surface structure of a lava flow records the interaction between the differential shear rate (usually correlated with the volumetric flow-rate) and viscosity-induced resistance to flow. However, the interior of a flow, being better insulated, may react differently or record a later set of emplacement conditions. Clefts of toothpaste lava occurring within fields of clinker on proximal-type 'a' flows also record different shear rates during different times of flow emplacement. The interplay between viscosity and shear rate determines the final morphological lava type, and although no specific portion of lava ever makes a transition from 'a' back to phoehoe, parts of a flow can appear to do so.     

Crystallization processes in an artificial magma: variations in crystal shape,growth rate and composition with melt cooling history

A large (4.8 m³, 1.3x10⁷ g) artificial mafic melt with a bulk composition similar to that of a basalt (but with a high CaO content of 17 wt%) was generated during a demonstration of in situ vitrification and was allowed to cool naturally. During the melting process, convection was vigorous, resulting in a chemically and thermally homogeneous melt body. Once heating was complete, the cooling rate was rapid with the temperature dropping from 1500°C to 500°C in 6 days within the interior of the 3 m diameter, 1.5 m thick body. A 20 h period of constant temperature (1140°C) observed during colling was the result of latent heat released by widespread crystallization. The final crystalline assemblage consists of diopsidic to hedenbergitic pyroxene and anorthitic feldspar, with a subordinate amount of potassic feldspar, plus a small amount of evolved glass. The compositions and proportions of phases agree well with those predicted by the MELTS thermodynamic model. Thermal and textural evidence suggest that convection within the melt ceased coincident with formation of the first crystals. Textural investigation of core samples reveals large (up to 1 cm in length) acicular diopsidic pyroxenes in a matrix of smaller feldspar and zoned pyroxene crystals (500 m in length). Crystal shape and pyroxene composition vary as a function of position within the solidified body, as a function of cooling rate. Both crystal size and degree of crystallinity are highest in the central, most slowly-cooled parts of the rock. Crystal shape is characterized by tabular, equilibrium-growth forms in the slowly-cooled areas, grading to highly skeletal, dendritic forms at the rapidly-cooled edges of the body. The pyroxene crystals are dominantly homogeneous diopside, but crystals are characterized by thin Fe-rich hedenbergitic rims. These rims were deposited when Mg in the melt was depleted by diopside growth, and melt temperature had cooled sufficiently to allow Fe-rich pyroxene growth. Crystal growth rates can be calculated based on thermal behavior of the melt, reinforced by thermodynamic modelling, and are determined to be between 10^-7 and 10^-8 cm/s in the central part of the melt. These estimates agree well with growth rates in natural systems with similar cooling rates. Pyroxene crystals that formed at a higher cooling rates are characterized by higher Al and lower Mg contents relative to tabular equilibrium crystalline forms, presumably as a result of disequilibrium melt compositions at the crystal-melt interface.New Mexico Bureau of Mines and Mineral Resources, New Mexico Institute of Mining and Technology, Socorro, NM 87801, USA     

Geochemical Evidence for Subduction Fluxes, Mantle Melting and Fractional Crystallization Beneath the South Sandwich Island Arc

The volcanoes of the South Sandwich island arc follow threedistinct series: low-K tholeiitic (followed by Zavodovski, Candlemas,Vindication, Montagu and Bristol), tholeiitic (followed by Visokoi,Saunders and Bellinghausen) and calcalkaline (followed by Leskov,Freehand and part of Cook and Thule). Flux calculations indicatethat the percentage contribution of the subduction componentto the mantle source of all three series varies from undetectable(e.g. Zr) through small (e.g. Nd=20%) and moderate (e.g. La,Ce, Sr=50–80%) to dominant (e.g. Pb, K, Ba, Rb, Cs >90%)with little change along the arc. Isotope systematics (Pb, Nd,Sr) show that this subduction component obtains a greater contributionfrom altered oceanic crust than from pelagic sediment. Elementsfor which the subduction contribution is small show that themantle is already depleted relative to N-MORB mantle (equivalentto loss of an 2•5% melt fraction) before melting beneaththe arc. After addition of the subduction component, dynamicmelting of this depleted mantle then causes the variations inK that distinguish the three series. The estimated degree ofpartial melting (20%) is slightly greater than that beneathocean ridges, though geothermometry suggests that the primarymagma temperature (1225C) is similar to that of primary MORB.About half of the melting may be attributed to volatile addition,and half to decompression. Dynamic melting involving three-dimensional,two-phase flow may be needed to explain fully the inter-islandvariations. KEY WORDS: geochemistry; petrology; fluxes; melting; subduction ^*Corresponding author     

Association of orogenic activity with the Ordovician radiation of marine life

The Ordovician radiation of marine life was among the most substantial pulses of diversification in Earth history and coincided in time with a major increase in the global level of orogenic activity. To investigate a possible causal link between these two patterns, the geographic distributions of 6576 individual appearances of Ordovician vician genera around the world were evaluated with respect to their proximity to probable centers of orogeny (foreland basins). Results indicate that these genera, which belonged to an array of higher taxa that diversified in the Middle and Late Ordovician (trilobites, brachiopods, bivalves, gastropods, monoplacophorans), were far more diverse in, and adjacent to, foreland basins than they were in areas farther removed from orogenic activity (carbonate platforms). This suggests an association of orogeny with diversification at that time.