The Plate Scale of the SODISM Instrument and the Determination of the Solar Radius at 607.1 nm

Knowledge of the Solar Diameter Imager and Surface Mapper (SODISM) plate scale is a fundamental parameter for obtaining the solar radius. We have determined the plate scale of the telescope on the ground and in flight onboard the Picard spacecraft. The results show significant differences; the main reason is that the conditions of observation are not the same. In addition, the space environment has an impact on the performance of a metrology instrument. Therefore, calibration in space and under the same conditions of observation is crucial. The transit of Venus allowed us to determine the plate scale of the SODISM telescope and hence the absolute value of the solar radius. The transit was observed from space by the Picard spacecraft on 5?–?6 June 2012. We exploited the data recorded by SODISM to determine the plate scale of the instrument, which depends on the characteristics of optical elements (mirrors, filters, or front window). The mean plate scale at 607.1 nm is found to be 1.0643 arcseconds?pixel^?1 with 3×10^?4 RMS. The solar radius at 607.1 nm from 1 AU is found to be equal to 959.86 arcseconds.     

Solar EUV/FUV irradiance variations: analysis and observational strategy

The knowledge of solar extreme and far ultraviolet (EUV) irradiance variations is essential for the characterization of the Earth’s upper atmosphere. For a long time, this knowledge has been based on empirical models, which are themselves based on proxies of the solar activity. However, the accurate modeling and prediction of the Earth’s upper atmosphere necessitate to improve the precision on the irradiance and its variations below about 200 nm. Here, we present a review of recent works made by the authors that aim at quantifying the irradiance variability at these wavelengths, and that lead to new way of monitoring the solar EUV/FUV irradiance spectrum. In more details, it is shown that the quantification of the high level of redundancy in the solar spectrum variability allows to envisage measuring only a small portion of the spectrum without losing essential knowledge. Finally, we discuss what should and could be measured in order to retrieve the solar extreme and far ultraviolet spectrum.     

Spatial Distribution and North–South Asymmetry of Coronal Bright Points from Mid-1998 to Mid-1999

Full-disc full-resolution (FDFR) solar images obtained with the Extreme Ultraviolet Imaging Telescope (EIT) on board the Solar and Heliospheric Observatory (SOHO) were used to analyse the centre-to-limb function and latitudinal distribution of coronal bright points. The results obtained with the interactive and the automatic method, as well as for three subtypes of coronal bright points for the time period 4 June 1998 to 22 May 1999 are presented and compared. An indication of a two-component latitudinal distribution of coronal bright points was found. The central latitude of coronal bright points traced with the interactive method lies between 10^∘ and 20^∘. This is closer to the equator than the average latitude of sunspots in the same period. Possible implications for the interpretation of the solar differential rotation are discussed. In the appendix, possible differences between the two solar hemispheres are analysed. More coronal bright points were present in the southern solar hemisphere than in the northern one. This asymmetry is statistically significant for the interactive method and not for the automatic method. The visibility function is symmetrical around the central meridian.     

3D Reconstruction from SECCHI-EUVI Images Using an Optical-Flow Algorithm: Method Description and Observation of an Erupting Filament

SECCHI-EUVI telescopes provide the first EUV images enabling a 3D reconstruction of solar coronal structures. We present a stereoscopic reconstruction method based on the Velociraptor algorithm, a multiscale optical-flow method that estimates displacement maps in sequences of EUV images. Following earlier calibration on sequences of SOHO-EIT data, we apply the algorithm to retrieve depth information from the two STEREO viewpoints using the SECCHI-EUVI telescope. We first establish a simple reconstruction formula that gives the radial distance to the centre of the Sun of a point identified both in EUVI-A and EUVI-B from the separation angle and the displacement map. We select pairs of images taken in the 30.4 nm passband of EUVI-A and EUVI-B, and apply a rigid transform from the EUVI-B image in order to set both images in the same frame of reference. The optical flow computation provides displacement maps from which we reconstruct a dense map of depths using the stereoscopic reconstruction formula. Finally, we discuss the estimation of the height of an erupting filament.     

Eit and LASCO Observations of the Initiation of a Coronal Mass Ejection

We present the first observations of the initiation of a coronal mass ejection (CME) seen on the disk of the Sun. Observations with the EIT experiment on SOHO show that the CME began in a small volume and was initially associated with slow motions of prominence material and a small brightening at one end of the prominence. Shortly afterward, the prominence was accelerated to about 100 km s^-1 and was preceded by a bright loop-like structure, which surrounded an emission void, that traveled out into the corona at a velocity of 200–400 km s^-1. These three components, the prominence, the dark void, and the bright loops are typical of CMEs when seen at distance in the corona and here are shown to be present at the earliest stages of the CME. The event was later observed to traverse the LASCO coronagraphs fields of view from 1.1 to 30 R⊙. Of particular interest is the fact that this large-scale event, spanning as much as 70 deg in latitude, originated in a volume with dimensions of roughly 35" (2.5 x 10⁴ km). Further, a disturbance that propagated across the disk and a chain of activity near the limb may also be associated with this event as well as a considerable degree of activity near the west limb.     

The LYRA Instrument Onboard PROBA2: Description and In-Flight Performance

The Large Yield Radiometer (LYRA) is an XUV–EUV–MUV (soft X-ray to mid-ultraviolet) solar radiometer onboard the European Space Agency Project for On-Board Autonomy 2 (PROBA2) mission, which was launched in November 2009. LYRA acquires solar-irradiance measurements at a high cadence (nominally 20?Hz) in four broad spectral channels, from soft X-ray to MUV, which have been chosen for their relevance to solar physics, space weather, and aeronomy. We briefly review the design of the instrument, give an overview of the data products distributed through the instrument website, and describe how the data are calibrated. We also briefly present a summary of the main fields of research currently under investigation by the LYRA consortium.     

Poisson Recoding Of Solar Images For Enhanced Compression

The amount of useful scientific data that a space-borne telescope produces is often limited by the available telemetry of the platform. General purpose image compression schemes are usually used to compress the image either lossy or losslessly. These schemes do not take into account the fact that pixel values of typical solar images are only known to within a certain uncertainty range. We present a preprocessing method to enhance the performance (compression ratio) of any subsequent image compression scheme. The method uses estimates of the photon shot and thermal noises to compute a recoding look-up table that maps the initial data into uncertainty intervals. The recoding method is lossy in a mathematical sense but lossless in a physical sense, since the image alterations are guaranteed to be smaller than the Poisson noise. The performance of any further compression algorithm is enhanced while achieving a known guaranteed maximum absolute error for each pixel in the case of lossless compression. This revised version was published online in October 2005 with corrections to one of the authors' names.     

Global Asymmetry of the Sun Observed in the Extreme Ultraviolet Radiation

We report on observations of the solar luminosity variations in the Fexii line (195 Å) over the period 1996–1999, which corresponds to the minimum and rising phase of the current 23rd solar cycle. The relatively or rather high temporal cadence and spatial resolution of the Extreme-ultraviolet Imaging Telescope (EIT) on board the Solar and Heliospheric Observatory (SOHO) allowed a nearly continuous measurement of intensity of different structures on the Sun. We find that a significant contribution to the longitudinal asymmetry, and thus to the 27-day variability of the solar EUV radiation, is produced by the numerous intermediate brightness elements that are globally distributed over large areas (up to about of the whole surface of the Sun). When activity is low, this component even becomes dominant over the contribution from localized active regions and bright points. This suggests that weak magnetic field areas outside active regions constitute an important factor through which solar activity modulates the solar EUV luminosity.     

A New Model for Propagating Parts of EIT Waves: A Current Shell in a CME

EIT waves are observed in EUV as bright fronts. Some of these bright fronts propagate across the solar disk. EIT waves are all associated with a flare and a CME and are commonly interpreted as fast-mode magnetosonic waves. Propagating EIT waves could also be the direct signature of the gradual opening of magnetic field lines during a CME. We quantitatively addressed this alternative interpretation. Using two independent 3D MHD codes, we performed nondimensional numerical simulations of a slowly rotating magnetic bipole, which progressively result in the formation of a twisted magnetic flux tube and its fast expansion, as during a CME. We analyse the origins, the development, and the observability in EUV of the narrow electric currents sheets that appear in the simulations. Both codes give similar results, which we confront with two well-known SOHO/EIT observations of propagating EIT waves (7 April and 12 May 1997), by scaling the vertical magnetic field components of the simulated bipole to the line of sight magnetic field observed by SOHO/MDI and the sign of helicity to the orientation of the soft X-ray sigmoids observed by Yohkoh/SXT. A large-scale and narrow current shell appears around the twisted flux tube in the dynamic phase of its expansion. This current shell is formed by the return currents of the system, which separate the twisted flux tube from the surrounding fields. It intensifies as the flux tube accelerates and it is co-spatial with weak plasma compression. The current density integrated over the altitude has the shape of an ellipse, which expands and rotates when viewed from above, reproducing the generic properties of propagating EIT waves. The timing, orientation, and location of bright and faint patches observed in the two EIT waves are remarkably well reproduced. We conjecture that propagating EIT waves are the observational signature of Joule heating in electric current shells, which separate expanding flux tubes from their surrounding fields during CMEs or plasma compression inside this current shell. We also conjecture that the bright edges of halo CMEs show the plasma compression in these current shells.