High-resolution observations of dissolved isoprene in surface seawater in the Southern Ocean during austral summer 2010–2011

We measured dissolved isoprene (2-methyl-1,3-butadiene; C₅H₈) concentrations in a broad area of the southern Indian Ocean and in the Indian sector of the Southern Ocean from 35°S to 64°S and from 37°E to 111°E during austral summer 2010–2011. Isoprene concentrations were continuously measured by use of a proton-transfer-reaction mass spectrometer combined with a bubbling-type equilibrator. Concentrations of isoprene and its emission flux throughout the study period ranged from 0.2 to 395 pmol L^?1 and from 181 to 313 nmol m^?2 day^?1, respectively, the averages being generally higher than those of previous studies. Although we found a significant linear positive relationship between isoprene and chlorophyll-a concentrations (r ² = 0.37, n = 36, P < 0.001), the correlation coefficient was lower than previously reported. In contrast, in the high-latitude area (>53°S) we identified a significant negative correlation (r ² = 0.59, n = 1263, P < 0.001) between isoprene and the temperature-normalized partial pressure of carbon dioxide (n-pCO₂), used as an indicator of net community production in this study. This suggests that residence times and factors controlling variations in isoprene and n-pCO₂ are similar within a physically stable water column.     

Possibility of recent changes in vertical distribution and size composition of chlorophyll-a in the western North Pacific region

Our analysis of the last three decades of retrospective data of vertical distributions and size composition of chlorophyll-a (Chl-a) over the western North Pacific has revealed significant changes of three indices related to Chl-a during summer season, as follows: (1) decreasing linear trend of the proportion of Chl-a in surface layer to that of the whole water column by 0.4 and 2.3% year⁻¹ in the subtropical area along 137°E (STA₁₃₇) during 1972 to 1997 and in the Kuroshio Extension area along 175°E (KEA₁₇₅) during 1990 to 2001; (2) increasing linear trend of the depth of subsurface Chl-a maximum (DCM) by 0.4 and 2.6 m year⁻¹ in STA₁₃₇ and KEA₁₇₅; and (3) decreasing linear trend of larger-size Chl-a (>3 μm) by 0.1 and 2.5% year⁻¹ in STA₁₃₇ and KEA₁₇₅, respectively. Water density (σ _θ ) at 75 m depth had also decreased by 0.006 and 0.05 year⁻¹ in STA₁₃₇ and KEA₁₇₅, respectively. The ratio of biogenic opal to biogenic CaCO₃ in the sinking flux decreased by 0.015 year⁻¹ in the subtropical region from 1997 to 2005. These findings may indicate that the subsurface chlorophyll maximum is deepening and larger phytoplankton such as diatoms has been decreasing during the past decade, associated with the decreasing density of surface water caused by warming in the western North Pacific, especially in the summer.     

SAR-imaged spiral eddies in Mutsu Bay and their dynamic and kinematic models

A pattern of slick streaks winding into a spiral, known as a spiral eddy, was identified in 5 images taken by the ERS-1/2 synthetic aperture radar (SAR) in Mutsu Bay (Japan); dynamic and kinematic models of these spiral eddies have been proposed. Common characteristics of the five spiral eddies are: 1) an eddy diameter of about 15 km; 2) their location in the western part of the bay; and 3) their cyclonic direction of rotation. Moreover, the wind conditions over the bay were common: prior to acquiring the images, a strong easterly wind continued blowing for more than one day. The wind field on the bay is known to be orographically steered and has strong windstress vorticity, which generates cyclonic circulation. The diameter and location of the circulation simulated with a numerical ocean model corresponded well to those of the identified spiral eddies. Based on these facts, we propose a dynamic model for the movement of a slick streak, and a kinematic model for the formation of a spiral eddy. We have assumed calm air, a microlayer and seawater with a cyclonic circulation in the dynamic model. The balance of forces is established in the microlayer among the frictional force from the seawater, the frictional force from the calm air, the gravitational force, and the Coriolis force. As a result, the velocity vector of the microlayer deflects slightly towards the center of the cyclonic circulation. We have assumed a point source of the microlayer in the kinematic model. The shapes of a slick streak simulated with the models agree well with the identified patterns in the SAR images.     

Improved Estimates of Wide-Ranging Sea Surface Temperature from GMS S-VISSR Data

We have developed an algorithm to estimate the wide-ranging Sea Surface Temperature (SST) data from the GMS-5 (Geostationary Meteorological Satellite) S-VISSR (Stretched-Visible Infrared Spin Scan Radiometer). Better SST estimates are realized by averaging the temporal variation of the VISSR calibration table and decreasing noise of the split-window terms using a spatial filter. The effects of the satellite zenith angle were examined in detail for better estimates, and VISSR-derived SSTs with root-mean-square (rms) error of 0.8 K were achieved using a new algorithm. The accuracy of SST estimates has been improved by using the temporal-spatial average of the split-window terms. Using the new techniques, we demonstrate that the hourly wide-ranging SST image data can be used to study the daily variations of SSTs in the Northern and Southern Pacific Oceans.     

Effects of CO2 on benthic biota: An in situ benthic chamber experiment in Storfjorden (Norway)

Carbon capture and storage (CCS) methods, either sub-seabed or in ocean depths, introduces risk of CO₂ leakage and subsequent interaction with the ecosystem. It is therefore important to obtain information on possible effects of CO₂. In situ CO₂ exposure experiments were carried out twice for 10 days during 2005 using a Benthic Chamber system at 400 m depth in Storfjorden, Norway. pCO₂ in the water above the sediment in the chambers was controlled at approximately 500, 5000 and 20,000 μatm, respectively. This article describes the experiment and the results from measured the biological responses within the chamber sediments. The results show effects of elevated CO₂ concentrations on biological processes such as increased nanobenthos density. Methane production and sulphate reduction was enhanced in the approximately 5000 μatm chamber.     

Breaking Up: Comminution Mechanisms in Sheared Simulated Fault Gouge

The microstructural state and evolution of fault gouge has important implications for the mechanical behaviour, and hence the seismic slip potential of faults. We use 3D discrete element (DEM) simulations to investigate the fragmentation processes operating in fault gouge during shear. Our granular fault gouge models consist of aggregate grains, each composed of several thousand spherical particles stuck together with breakable elastic bonds. The aggregate grains are confined between two blocks of solid material and sheared under a given normal stress. During shear, the grains can fragment in a somewhat realistic way leading to an evolution of grain size, grain shape and overall texture. The ‘breaking up’ of the fault gouge is driven by two distinct comminution mechanisms: grain abrasion and grain splitting. The relative importance of the two mechanisms depends on applied normal stress, boundary wall roughness and accumulated shear strain. If normal stress is sufficiently high, grain splitting contributes significantly to comminution, particularly in the initial stages of the simulations. In contrast, grain abrasion is the dominant mechanism operating in simulations carried out at lower normal stress and is also the main fragmentation mechanism during the later stages of all simulations. Rough boundaries promote relatively more grain splitting whereas smooth boundaries favor grain abrasion. Grain splitting (plus accompanying abrasion) appears to be an efficient mechanism for reducing the mean grain size of the gouge debris and leads rapidly to a power law size distribution with an exponent that increases with strain. Grain abrasion (acting alone) is an effective way to generate excess fine grains and leads to a bimodal distribution of grain sizes. We suggest that these two distinct mechanisms would operate at different stages of a fault’s history. The resulting distributions in grain size and grain shape may significantly affect frictional strength and stability. Our results therefore have implications for the earthquake potential of seismically active faults with accumulations of gouge. They may also be relevant to the susceptibility of rockslides since non-cohesive basal shear zones will evolve in a similar way and potentially control the dynamics of the slide.     

Spatial distribution of sister species of vesicomyid bivalves Calyptogena okutanii and Calyptogena soyoae along an environmental gradient in chemosynthetic biological communities in Japan

Vesicomyid bivalves have a substantial biomass in deep-sea chemosynthetic biological communities in the Pacific. Using a novel multiplex-PCR (mPCR) method to identify the co-occurring vesicomyids in Sagami Bay, we analyzed the distribution of Calyptogena okutanii and Calyptogena soyoae along environmental gradients. All the known distributions of C. okutanii indicated the different preferences in salinity and temperature to those of C. soyoae, and in Sagami Bay, depth seemed to be an important environmental factor, too. Although the concentration of hydrogen sulfide in sediment was not examined, our results showed that the distributions of these two Calyptogena clams were affected by salinity and temperature.     

Large ageostrophic currents in the abyssal layer southeast of Kyushu, Japan, by direct measurement of LADCP

With full-depth LADCP velocity data collected in a wide area southeast of Kyushu, Japan, large velocity currents, occasionally exceeding 15 cm s^?1, were observed in a thick, 500–1,500 m, near-homogeneous density layer below approximately 3,000 m depth around the steep topographies. The currents were found not to flow along the topographic contours, and to be strongly ageostrophic. The directions of the bottom-layer currents are rather related with phase of the semi-diurnal tides, suggesting deeply intruded internal tides generated at the steep topographies.     

Empirical ocean-color algorithms to retrieve chlorophyll-a, total suspended matter, and colored dissolved organic matter absorption coefficient in the Yellow and East China Seas

A bio-optical dataset collected during the 1998?C2007 period in the Yellow and East China Seas (YECS) was used to provide alternative empirical ocean-color algorithms in the retrieval of chlorophyll-a (Chl-a), total suspended matter (TSM), and colored dissolved organic matter (CDOM) absorption coefficients at 440 nm (ag₄₄₀). Assuming that remote-sensing reflectance (Rrs) could be retrieved accurately, empirical algorithms for T_Chl (regionally tuned Tassan??s Chl-a algorithm) in case-1 waters (T_Chl2i in case-2 waters), T_TSM (regionally tuned Tassan??s TSM algorithm), and T_ag440 or C_ag440 (regionally tuned Tassan??s or Carder??s ag₄₄₀ algorithm) were able to retrieve Chl-a, TSM, and ag₄₄₀ with uncertainties as high as 35, 46, and 35%, respectively. Applying the standard SeaWiFS Rrs, T_Chl was not viable in the eastern part of the YECS, which was associated with an inaccurate SeaWiFS Rrs retrieval because of improper atmospheric correction. T_Chl behaved better than other algorithms in the turbid case-2 waters, although overestimation was still observed. To retrieve more reliable Chl-a estimates with standard SeaWiFS Rrs in turbid water (a proxy for case-2 waters), we modified T_Chl for data with SeaWiFS normalized water-leaving radiance at 555 nm (nLw₅₅₅) > 2 mW cm^?2 ??m^?1 sr^?1 (T_Chl2s). Finally, with standard SeaWiFS Rrs, we recommend switching algorithms from T_Chl2s (for case-2 waters) to MOC_Chl (SeaWiFS-modified NASA OC4v4 standard algorithm for case-1 waters) for retrieving Chl-a, which resulted in uncertainties as high as 49%. To retrieve TSM and ag₄₄₀ using SeaWiFS Rrs, we recommend empirical algorithms for T_TSM (pre-SeaWiFS-modified form) and MT_ag440 or MC_ag440 (SeaWiFS Rrs-modified forms of T_ag440 or C_ag440). These could retrieve with uncertainties as high as 82 and 52%, respectively.