Variations in fraction of absorbed photosynthetically active radiation and comparisons with MODIS data in burned black spruce forests of interior Alaska

Absorption of photosynthetically active radiation (PAR) by vegetation was observed in two burned black spruce forests, one and seven years after wildfire, in interior Alaska along with several vegetation properties. This study considered PAR absorption by mosses by examining the relationship between PAR transmittance and fractional coverage of green vegetation. Our results suggest that mosses absorbed a considerable fraction of incoming PAR in the burned forests, which cannot be neglected in evaluating the fraction of absorbed PAR (FPAR). The relationships between FPAR and vegetation indices revealed that enhanced vegetation index (EVI) may be suitable for expressing the spatial and temporal variation of FPAR, regardless of stand age after wildfire. The comparison between the observed in situ FPAR and FPAR derived from Moderate Resolution Imaging Spectroradiometer (MODIS FPAR) clearly showed that MODIS FPAR was highly overestimated. The most likely reason for the overestimation was identified as misclassification of land cover type. The current regional estimation of photosynthesis in boreal region based on the light-use efficiency approach and MODIS FPAR is probably overestimated, and an accurate distribution of FPAR is desired for clarifying the regional carbon exchange in boreal forests.     

Structural changes of synthetic opal by heat treatment

The structural changes of synthetic opal by heat treatment up to 1,400 °C were investigated using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared and Raman spectroscopies. The results indicate that the dehydration and condensation of silanol in opal are very important factors in the structural evolution of heat-treated synthetic opal. Synthetic opal releases water molecules and silanols by heat treatment up to 400 °C, where the dehydration of silanol may lead to the condensation of a new Si–O–Si network comprising a four-membered ring structure of SiO₄ tetrahedra, even at 400 °C. Above 600 °C, water molecules are lost and the opal surface and internal silanol molecules are completely dehydrated by heat effect, and the medium-temperature range structure of opal may begin to thermally reconstruct to six-membered rings of SiO₄ tetrahedra. Above 1,000 °C, the opal structure almost approaches that of silica glass with an average structure of six-membered rings. Above 1,200 °C, the opal changes to low-cristobalite; however, minor evidence of low-tridymite stacking was evident after heat treatment at 1,400 °C.     

A new climatology of the Okhotsk Sea derived from the FERHRI database

This paper introduces a new hydrographic climatology of the Okhotsk Sea; this climatology was constructed from the Far Eastern Regional Hydrometeorological Research Institute (FERHRI) database. The FERHRI database has a volume of data three to five times larger than the data used in previous studies because unpublished Russian observation data have been included in the FERHRI database. After removing erroneous data from the database by pertinent quality control methods, the climatology for 1/4°?×?1/4° grids is produced by applying objective analysis procedures. Features similar to those in previous studies are seen in the intermediate layers in the Okhotsk Sea, whereas our climatology provides values that fill in gaps in previous climatologies. It is obvious from the monthly climatologies that temperature and salinity distributions evolve in accordance with seasonal variations in the Eastern Sakhalin Current and inflow from the North Pacific. We also reconstructed climatologies for the winter mixed layer and dense shelf water from data obtained from the temperature minimum waters identified as the remnants of these two layers. Free access to the 1°?×?1° versions of all climatologies constructed in this study is available through the website.     

Structural controls on the 1998 volcanic unrest at Iwate volcano: Relationship between a shallow, electrically resistive body and the possible ascent route of magmatic fluid

Magnetotelluric (MT) measurements were conducted at Iwate volcano, across the entirety of the mountain, in 1997, 1999, 2003, 2006, and 2007. The survey line was 18 km in length and oriented E–W, comprising 38 measurements sites. Following 2D inversion, we obtained the resistivity structure to a depth of 4 km. The surface resistive layer (~ several hundreds of meters thick) is underlain by extensive highly conductive zones. Based on drilling data, the bottom of the highly conductive zone is interpreted to represent the 200 °C isotherm, below which (i.e., at higher temperatures) conductive clay minerals (smectite) are rare. The high conductivity is therefore mainly attributed to the presence of hydrothermally altered clay. The focus of this study is a resistive body beneath the Onigajo (West-Iwate) caldera at depths of 0.5–3 km. This body appears to have impeded magmatic fluid ascent during the 1998 volcanic unrest, as inferred from geodetic data. Both tectonic and low-frequency earthquakes are sparsely distributed throughout this resistive body. We interpret this resistive body as a zone of old, solidified intrusive magma with temperatures in excess of 200 °C. Given that a similar relationship between a resistive body and subsurface volcanic activity has been suggested for Asama volcano, structural controls on subsurface magmatic fluid movement may be a common phenomenon at shallow levels beneath volcanoes.     

Comparison of the soil physical properties and hydrological processes in two different forest type catchments

Water Resources - Soil physical properties and hydrological processes were analyzed in two experimental catchments with different forest types: one catchment is covered mostly with conifer type...     

Taxonomy and biogenicity of Archaean spheroidal microfossils (ca. 3.0 Ga) from the Mount Goldsworthy–Mount Grant area in the northeastern Pilbara Craton, Western Australia

Microstructures recently reported from an Archaean sedimentary succession (ca. 3.0 Ga) in the Mount Goldsworthy–Mount Grant area in the northeastern Pilbara Craton meet the criteria for compelling evidence of biogenicity [Sugitani, K., Grey, K., Allwood, A., Nagaoka, T., Mimura, K., Minami, M., Marshall, C.P., Van Kranendonk, M.J., Walter, M.R., 2007. Diverse microstructures from Archaean chert from the Mount Goldsworthy–Mount Grant area, Pilbara Craton, Western Australia: microfossils, dubiofossil, or pseudofossils. Precambrian Res. 158, 228–262]. The structures are morphologically diverse. Although they were tentatively classified into five major morphological types (thread-like, film-like, small (<15 μm) and large (>15 μm) spheroidal, and spindle-like), the possible taxonomic significance of these groups was not discussed. Building on our earlier analysis, we focus on the morphology of the larger spheroids, as well as presenting further evidence relating spindles and several bizarre forms, and attempt to group them taxonomically and adduce additional evidence for their biogenicity.Taphonomic features were identified in each of the various morphological groups, but the range of morphological diversity of the spheroids cannot be attributed solely to taphonomic alteration. Four subdivisions of spheroids are proposed: (1) simple single-walled spheroids, (2) thin-walled spheroids having a diffuse envelope, (3) thick-walled spheroids, and (4) spheroids having an extensively folded wall. Simple single-walled spheroids, 15–60 μm in diameter, with various wall textures but commonly lacking envelopes or appendages form the dominant subgroup. Other complex morphologies are present and include aligned or associated bodies of thin-walled spheroids with diffuse envelopes, and spindle-like structures containing inner spheroidal bodies. The degree of morphological complexity and associations between structures suggest the presence of reproductive phases. If correct, this implies that the early Earth (ca. 3.0 Ga) showed a higher level of biodiversity than is currently postulated.     

Geotechnical sealing material for coastal disposal facility for soils and wastes contaminated by radioactive cesium

Safe disposal of wastes produced due to the process of decontamination in and around Fukushima No. 1 nuclear power plant is an urgent requirement. The purpose of this study was to develop a sealing material which can be used as an engineered barrier for a final disposal facility for the soils and wastes contaminated by radioactive cesium. The analyses conducted based on 4-m-thick sealing layer revealed that the hydraulic conductivity of the sealing material needs to be kept below 5.0?×?10^?10?m/s to avoid the seepage of contaminants below the environmentally safe limits. Sealing material was developed using marine clay–bentonite mixture and the engineering characteristics were examined. The results of laboratory experiments showed that, with the addition of bentonite, the hydraulic conductivity equal to or less than 5.0?×?10^?10?m/s was achieved when the effective consolidation stress is equal to or more than 27?kPa. From the tests for adsorption properties for cesium, it was found that the sealing material showed the significant capacity of adsorption for cesium in seawater. It was concluded that the construction of waste disposal facility on the sandy seafloor is feasible using the sealing layer proposed in this study.     

Sealevel history recorded in the Pleistocene carbonate sequence in IODP Hole 310‐M0005D,off Tahiti

Material cored during the Integrated Ocean Drilling Program (IODP) Expedition 310 ‘Tahiti Sea Level’ revealed that the fossil reef systems around Tahiti are composed of two major stratigraphic sequences: (i) a last deglacial sequence; and (ii) an older Pleistocene sequence. The older Pleistocene carbonate sequence is composed of reef deposits associated with volcaniclastic sediments and was preserved in Hole 310‐M0005D drilled off Maraa. Within an approximately 70‐m‐thick older Pleistocene sequence (33.22–101.93 m below seafloor; 92.85–161.56 m below present sealevel) in this hole, 11 depositional units are defined by lithological changes, sedimentological features, and paleontological characteristics and are numbered sequentially from the top of the hole downward (Subunits P1–P11). Paleowater depths inferred from nongeniculate coralline algae, combined with those determined by using corals and larger foraminifers, suggest two major sealevel rises during the deposition of the older Pleistocene sequence. Of these, the second sealevel rise is associated with an intervening sealevel drop. It is likely that the second sealevel rise corresponds to that during Termination II (TII, the penultimate deglaciation, from Marine Isotope Stages 6 to 5e). Therefore, the intervening sealevel drop can be correlated with that known as the ‘sealevel reversal’ during TII. Because there are limited data on the Pleistocene reef systems in the tropical South Pacific Ocean, this study provides important information about Pleistocene sealevel history, the evolution of coral reef ecosystems, and the responses of coral reefs to Quaternary climate changes.     

Effects of Fetch on Turbulent Flow and Pollutant Dispersion Within a Cubical Canopy

The effects of fetch on turbulent flow and pollutant dispersion within a canopy formed by regularly-spaced cubical objects is investigated using large-eddy simulation. Six tracer gases are simultaneously released from a ground-level continuous pollutant line source placed parallel to the spanwise axis at the first, second, third, fifth, seventh and tenth rows. Beyond the seventh row, the standard deviations of the fluctuations in the velocity components and the Reynolds shear stresses reach nearly equivalent states. Low-frequency turbulent flow is generated near the bottom surface around the first row and develops as the fetch increases. The turbulent flow eventually passes through the canopy at a near-constant interval. The mean concentration within the canopy reaches a near-constant value beyond the seventh row. In the first and second rows, narrow coherent structures frequently affect the pollutant escape from the top of the canopy. These structures increase in width as the fetch increases, and they mainly affect the removal of pollutants from the canopy.     

Heat-Mitigation Effects of Irrigated Rice-Paddy Fields Under Changing Atmospheric Carbon Dioxide Based on a Coupled Atmosphere and Crop Energy-Balance Model

Boundary-Layer Meteorology - Known as the heat-mitigation effect, irrigated rice-paddy fields distribute a large fraction of their received energy to the latent heat during the growing season. The...