Water vapour content over two Indian sites tested for a millimeter-wave radio observatory

Measurements of the water vapour content over two possible sites for a millimeter-wave radio-observatory in South India are described. The results of the survey, made with an infrared spectral hygrometer built at the Meudon Observatory, France are compared with those of similar surveys made at some other sites in Europe and America.     

Parameter estimation for basin-scale ecosystem-linked population models of large pelagic predators: Application to skipjack tuna

A Spatial Ecosystem and Population Dynamic Model (SEAPODYM) is used in a data assimilation study aiming to estimate model parameters that describe dynamics of Pacific skipjack tuna population on ocean-based scale. The model based on advection–diffusion–reaction equations explicitly predicts spatial dynamics of large pelagic predators, while taking into account data on several mid-trophic level components, oceanic primary productivity and physical environment. In order to improve its quantitative ability, the model was parameterized through assimilation with commercial fisheries data, and optimization was carried out using maximum likelihood estimation approach. To address the optimization task we implemented an adjoint technique to obtain an exact, analytical evaluation of the likelihood gradient. We conducted a series of computer experiments in order to (i) determine model sensitivity with respect to variable parameters and, hence, investigate their observability; (ii) estimate observable parameters and their errors; and (iii) justify the reliability of the computed solution. Parameters describing recruitment, movement, habitat preferences, natural and fishing mortality of skipjack population were analysed and estimated. Results of the study suggest that SEAPODYM with achieved parameterization scheme can help to investigate the impact of fishing under various management scenarios, and also conduct forecasts of a given species stock and spatial dynamics in a context of environmental and climate changes.     

Policy and implementation in rural planning

Although often critical of the results achieved by rural planners, research by geographers and others has for some time been constrained by an inability to isolate the precise impacts of planning procedures on rural areas. The notions of a technically solvable ‘implementation problem’ and a politically complex ‘policy problem’ are confronted here, and acknowledgement of the latter directs research into the realms of decision-making and policy-implementation iteration in rural areas. Key themes in the understanding of these matters are those of central-local state relations, inter-agency relations and public-private sector relations, all of which should figure prominently in any conceptualisation of policymaking and implementation in rural areas. One final factor which invites conceptual clarification is that of the specificity of rurality as a policy-moulding phenomenon. The idea is introduced of a ‘rural dimension’ which presents a spatial facade to aspatial structures and processes.     

Shallow-water longshore drift-fed submarine fan deposition (Moisie River Delta, Eastern Canada)

Submarine canyons and associated submarine fans are in some cases located at the end of a littoral cell where they act as conduits for the transfer of eroded terrigenous sediments to the marine environment. Such fans are generally found in deep-water settings at >500 m water depth. Offshore the Moisie River Delta (NW Gulf of St. Lawrence, Eastern Canada), high-resolution multibeam bathymetry and seismic data led to the discovery of an unusually shallow submarine fan (≤60 m) located at the end of a littoral cell. Sediment is transported westward on the shallow coastal shelf, as demonstrated by the downcurrent displacement of oblique nearshore sandbars where the shelf narrows to less than 1 km. The steep slope near the end of the littoral cell is incised by a channel that feeds a submarine fan composed of smaller channels and depositional lobes. According to existing Holocene evolution models for the region, the fan formed within the last 5,000 years. Its evolution is largely due to the transport of sediment by longshore drift. Multibeam echosounder and seismic data also reveal that the gravity-driven accretion of the submarine fan is characterized mainly by two processes, i.e., frequent small-scale, downslope migration of sandwaves on the slope, and more episodic slumping/turbidity-current activity in the deeper part of the fan. This study documents that, besides their common deep-water location, smaller-scale submarine fans can occur also in very shallow water, implying that they could be more frequent than previously thought both in modern environments and in the rock record.     

Seismic signature of a phreatic explosion: hydrofracturing damage at Karthala volcano, Grande Comore Island, Indian Ocean

Karthala volcano is a basaltic shield volcano with an active hydrothermal system that forms the southern two-thirds of the Grande Comore Island, off the east coat of Africa, northwest of Madagascar. Since the start of volcano monitoring by the local volcano observatory in 1988, the July 11th, 1991 phreatic eruption was the first volcanic event seismically recorded on this volcano, and a rare example of a monitored basaltic shield. From 1991 to 1995 the VT locations, 0.5<M_l<4.3, show a crack shaped pattern (3 km long, 1 km wide) within the summit caldera extending at depth from –2 km to +2 km relative to sea level. This N-S elongated pattern coincides with the direction of the regional maximum horizontal stress as deduced from regional focal mechanism solutions. This brittle signature of the damage associated with the 1991 phreatic eruption is a typical pattern of the seismicity induced by controlled fluid injections such as those applied at geothermal fields, in oil and gas recovery, or for stress measurements. It suggests the 1991 phreatic eruption was driven by hydraulic fracturing induced by forced fluid flow. We propose that the extremely high LP and VT seismicity rates, relative to other effusive volcanoes, during the climax of the 1991 phreatic explosion, are due to the activation of the whole hydrothermal system, as roughly sized by the distribution of VT hypocenters. The seismicity rate in 1995 was still higher than the pre-eruption seismicity rate, and disagrees with the time pattern of thermo-elastic stress readjustment induced by single magma intrusions at basaltic volcanoes. We propose that it corresponds to the still ongoing relaxation of pressure heterogeneity within the hydrothermal system as suggested by the few LP events that still occurred in 1995.Editorial responsibility: H Shinohara     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

Late Quaternary chironomid community structure shaped by rate and magnitude of climate change

Much is known about how climate change impacts ecosystem richness and turnover, but we have less understanding of its influence on ecosystem structures. Here, we use ecological metrics (beta diversity, compositional disorder and network skewness) to quantify the community structural responses of temperature-sensitive chironomids (Diptera: Chironomidae) during the Late Glacial (14 700–11 700 cal a bp ) and Holocene (11 700 cal a bp to present). Analyses demonstrate high turnover (beta diversity) of chironomid composition across both epochs; however, structural metrics stayed relatively intact. Compositional disorder and skewness show greatest structural change in the Younger Dryas, following the rapid, high-magnitude climate change at the Bølling–Allerød to Younger Dryas transition. There were fewer climate-related structural changes across the early to mid–late Holocene, where climate change was more gradual and lower in magnitude. The reduced impact on structural metrics could be due to greater functional resilience provided by the wider chironomid community, or to the replacement of same functional-type taxa in the network structure. These results provide insight into how future rapid climate change may alter chironomid communities and could suggest that while turnover may remain high under a rapidly warming climate, community structural dynamics retain some resilience.     

Storm-induced turbidity currents on a sediment-starved shelf: Insight from direct monitoring and repeat seabed mapping of upslope migrating bedforms

The monitoring of turbidity currents enables accurate internal structure and timing of these flows to be understood. Without monitoring, triggers of turbidity currents often remain hypothetical and are inferred from sedimentary structures of deposits and their age. In this study, the bottom currents within 20 m of the seabed in one of the Pointe-des-Monts (Gulf of St. Lawrence, eastern Canada) submarine canyons were monitored for two consecutive years using Acoustic Doppler Current Profilers. In addition, multibeam bathymetric surveys were carried out during deployment of the Acoustic Doppler Current Profilers and recovery operations. These new surveys, along with previous multibeam surveys carried out over the last decade, revealed that crescentic bedforms have migrated upslope by about 20 to 40 m since 2007, despite the limited supply of sediment on the shelf or river inflow in the region. During the winter of 2017, two turbidity currents with velocities reaching 0·5 m sec⁻¹ and 2·0 m sec⁻¹, respectively, were recorded and were responsible for the rapid (<1 min) upstream migration of crescentic bedforms measured between the autumn surveys of 2016 and 2017. The 200 kg (in water) mooring was also displaced 10 m down-canyon, up the stoss side of a bedform, suggesting that a dense basal layer could be driving the flow during the first minute of the event. Two other weaker turbidity currents with speeds <0·5 m sec⁻¹ occurred, but did not lead to any significant change on the seabed. These four turbidity currents coincided with strong and sustained wind speed >60 km h⁻¹ and higher than normal wave heights. Repeat seabed mapping suggests that the turbidity currents cannot be attributed to a canyon-wall slope failure. Rather, sustained windstorms triggered turbidity currents either by remobilizing limited volumes of sediment on the shelf or by resuspending sediment in the canyon head. Turbidity currents can thus be triggered when the sediment volume available is limited, likely by eroding and incorporating canyon thalweg sediment in the flow, thereby igniting the flow. This process appears to be particularly important for the generation of turbidity currents capable of eroding the lee side of upslope migrating bedforms in sediment-starved environments and might have wider implications for the activity of submarine canyons worldwide. In addition, this study suggests that a large external trigger (in this case storms) is required to initiate turbidity currents in sediment-starved environments, which contrasts with supply-dominated environments where turbidity currents are sometimes recorded without a clear triggering mechanism.     

Seismic stability analysis of piled embankments: A multiphase approach

The seismic stability analysis of an embankment lying over a soft foundation soil reinforced by a group of vertical piles is performed within the framework of the upper bound kinematic approach of yield design. The analysis is based on a previously developed ‘multiphase’ model of the reinforced ground, which explicitly accounts for the shear and bending resistances of the piles. Making use of appropriate failure mechanisms involving shear zones across which the reinforcements are continuously deforming, along with ‘plastic hinge’ surfaces, upper bound estimates to the critical seismic coefficient of the structure are derived. The results, which are confirmed by the simulations obtained from a finite element elastoplastic code, give clear evidence of the key role played by the bending strength capacities of the piles in ensuring the stability of the pile reinforced embankment. Copyright © 2009 John Wiley & Sons, Ltd.