Testing the applicability of a kinematic wave-based distributed hydrological model in two climatically contrasting catchments

Abstract

Steep mountainous areas account for 70% of all river catchments in Japan. To predict river discharge for the mountainous catchments, many studies have applied distributed hydrological models based on a kinematic wave approximation with surface and subsurface flow components (DHM-KWSS). These models reproduce observed river discharge of catchments in Japan well; however, the applicability of a DHM-KWSS to catchments with different geographical and climatic conditions has not been sufficiently examined. This research applied a DHM-KWSS to two river basins that have different climatic conditions from basins in Japan to examine the transferability of the DHM-KWSS model structure. Our results show that the DHM-KWSS model structure explained flow regimes for a wet river basin as well as a large flood event in an arid basin; however, it was unable to explain long-term flow regimes for the arid basin case study.     

Non-linear models for simulating the dynamic damaging process of low-rise reinforced concrete buildings during severe earthquakes

This paper is a study of idealizing a planar reinforced concrete frame as a non-linear dynamic system for the purpose of simulating its inelastic behaviour during severe earthquakes. After having estimated the restoring force characteristics of all constituent members by experimental means (represented, for example, by a group of empirical equations), it is possible to estimate the non-linear characteristics of the complete structure and to trace the damaging process for each constituent member under a given ground motion disturbance. However, this technique, which is directly based on member-level properties, generally requires rather laborious computational procedures; for practical reasons it is necessary to develop a simplified model, reducing the required calculation without losing the substance of the mechanical phenomena. Thus the reliability of simplification by conventional shear modelling is examined in direct comparison with the response results from rigorous modelling. It is concluded that the shear modelling generally yields an inadequate and, in many cases, erroneous result. The primary cause leading to this discrepancy is identified and, based on this discussion, a more appropriate modelling as simple as conventional shear modelling is proposed.     

Space weathered rims found on the surfaces of the Itokawa dust particles

On the basis of observations using Cs‐corrected STEM, we identified three types of surface modification probably formed by space weathering on the surfaces of Itokawa particles. They are (1) redeposition rims (2–3 nm), (2) composite rims (30–60 nm), and (3) composite vesicular rims (60–80 nm). These rims are characterized by a combination of three zones. Zone I occupies the outermost part of the surface modification, which contains elements that are not included in the unchanged substrate minerals, suggesting that this zone is composed of sputter deposits and/or impact vapor deposits originating from the surrounding minerals. Redeposition rims are composed only of Zone I and directly attaches to the unchanged minerals (Zone III). Zone I of composite and composite vesicular rims often contains nanophase (Fe,Mg)S. The composite rims and the composite vesicular rims have a two‐layered structure: a combination of Zone I and Zone II, below which Zone III exists. Zone II is the partially amorphized zone. Zone II of ferromagnesian silicates contains abundant nanophase Fe. Radiation‐induced segregation and in situ reduction are the most plausible mechanisms to form nanophase Fe in Zone II. Their lattice fringes indicate that they contain metallic iron, which probably causes the reddening of the reflectance spectra of Itokawa. Zone II of the composite vesicular rims contains vesicles. The vesicles in Zone II were probably formed by segregation of solar wind He implanted in this zone. The textures strongly suggest that solar wind irradiation damage and implantation are the major causes of surface modification and space weathering on Itokawa.     

A Late Holocene geomagnetic secular variation record from Erhai Lake, southwest China

A secular variation record of the geomagnetic field direction for the last 6.5  kyr has been obtained from the magnetization of sediment cores from Erhai Lake, southwest China. In order to make a comparison with this record, secular variation in east-central China was investigated by combining available magnetic field data from historical records and archaeomagnetic measurements since about 350 bc . The secular variation in Erhai Lake shows features consistent with the combined record, except for the oldest three observed declination swings in Sian from 720 to 900 ad . Many features of declination and inclination in China also occur in Japan. From 500 to 1000 ad , declination was westerly ranging from about −20° to −5° in Erhai Lake, east-central China, and Japan.     

Active strike–slip faulting and macroscopically nonrigid deformation of volcanic rocks in central Japan inferred from a paleomagnetic study

Detailed paleomagnetic investigation of a pyroclastic flow deposit has clarified the deformation mode around an active fault. In central Japan, the early Quaternary Nyukawa Pyroclastic Flow Deposit is cut by the active dextral Enako fault. Activity level of the fault is evaluated on the basis of geological and geomorphological surveys. Then, paleomagnetic samples are collected from 22 sites at exposures located on a lineament that is adjoining and parallel to the Enako fault. Stable thermoremanent magnetization (TRM) of the pyroclastic deposit is isolated through progressive thermal and/or alternating field demagnetization tests. Untilted site-mean directions of the TRMs simultaneously acquired during initial cooling indicate significant clockwise vertical-axis rotation. The lineament was then activated with right-lateral motions through the early Quaternary. Together with the late Quaternary activities along the adjoining Enako fault evaluated by our study, the present result exemplifies a migration of active segments within a fault system during the Quaternary. Paleomagnetic directions on the strike–slip fault are not concordant with uniform deformation predicted by the model of rotation of rigid blocks aligned on a master fault, but suggestive of a periodic deformation as a result of intense fracturing and differential rotation of blocks bounded by nested parallel faults.     

Validation of a new generation system for bottom boundary layer beneath solitary wave

Understanding of sea bottom boundary layer characteristics, especially bottom shear stress acting on the sea bed, is an important step needed in sediment transport modeling for practical application purposes. In the present study, a new generation system for bottom boundary layer under solitary wave is proposed. Applicability of this system is examined by comparing measured and numerical solution velocities. Moreover, transitional behavior from laminar to turbulence was investigated. It is concluded that the critical Reynolds number in the experiments shows good agreement with DNS result of Vittori and Blondeaux (2008) and laboratory data of Sumer et al. (2010), indicating validity of the generation system. Since the present generation system enables continuous measurement to obtain ensemble averaged quantities, it can be effectively utilized for future experimental studies on solitary wave boundary layers, including sediment transport experiments with movable bed.     

Behaviour of proteinaceous substances in the estuary of the Tama River

Behaviour of dissolved and particulate proteinaceous substances in the estuary of the Tama River was investigated through field observations and laboratory experiments. Concentrations of dissolved proteinaceous substances in estuarine water were determined at eight stations between the mouth of the Tama River (TA-15) and a point 16km upstream (TA-8), using the colorimetric method of Lowryet al. (1951) that employs Folin phenol reagent. The results were expressed in terms of Folin phenol active substances (FPAS). It was found that FPAS decreased with increasing salinity and that the proportion of high molecular weight FPAS (molecular weight greater than 100,000) decreased rapidly in the estuary.The shapes, sizes and numbers of amorphous particulate substances stained by Amido Black 10B, called Amido Black active substances (ABAS), were determined under a microscope. The numbers of ABAS retained on Millipore HA filters (mean diameter: 10–80µm) amounted to 450ml^–1 in the estuarine water about 6km from the mouth of the estuary (Station TA-12M). Some of these aggregates are considered to be producedin situ by flocculation of high molecular weight FPAS during estuarine mixing. ABAS were also produced in experiments by mixing filtered river water with sea water.